Insertion du projet dans sa totalité

8 files changed, 0 insertions, 660 deletions

diff --git a/Core/Inc/button.h b/Core/Inc/button.h
deleted file mode 100644
index fff10b7..0000000
--- a/Core/Inc/button.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * button.h
- *
- *  Created on: 2 déc. 2020
- *      Author: root
- */
-
-#ifndef INC_BUTTON_H_
-#define INC_BUTTON_H_
-
-#include "stm32l053xx.h"
-
-typedef struct
-{
-GPIO_TypeDef * gpioPort;
-uint8_t pin;
-uint8_t pull;
-
-}BUTTON_TypeDef;
-
-#endif /* INC_BUTTON_H_ */
diff --git a/Core/Inc/gpio.h b/Core/Inc/gpio.h
deleted file mode 100644
index 5dd191b..0000000
--- a/Core/Inc/gpio.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/**

-  ******************************************************************************

-  * @file    gpio.h

-  * @brief   This file contains all the function prototypes for

-  *          the gpio.c file

-  ******************************************************************************

-  * @attention

-  *

-  * <h2><center>&copy; Copyright (c) 2021 STMicroelectronics.

-  * All rights reserved.</center></h2>

-  *

-  * This software component is licensed by ST under BSD 3-Clause license,

-  * the "License"; You may not use this file except in compliance with the

-  * License. You may obtain a copy of the License at:

-  *                        opensource.org/licenses/BSD-3-Clause

-  *

-  ******************************************************************************

-  */

-/* Define to prevent recursive inclusion -------------------------------------*/

-#ifndef __GPIO_H__

-#define __GPIO_H__

-

-#ifdef __cplusplus

-extern "C" {

-#endif

-

-/* Includes ------------------------------------------------------------------*/

-#include "main.h"

-

-/* USER CODE BEGIN Includes */

-

-/* USER CODE END Includes */

-

-/* USER CODE BEGIN Private defines */

-

-/* USER CODE END Private defines */

-

-void MX_GPIO_Init(void);

-

-/* USER CODE BEGIN Prototypes */

-

-/* USER CODE END Prototypes */

-

-#ifdef __cplusplus

-}

-#endif

-#endif /*__ GPIO_H__ */

-

-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

diff --git a/Core/Inc/lcd_1602.h b/Core/Inc/lcd_1602.h
deleted file mode 100644
index 5df49f3..0000000
--- a/Core/Inc/lcd_1602.h
+++ /dev/null
@@ -1,28 +0,0 @@
-#ifndef __LCD_1602_H

-#define __LCD_1602_H

-#include "stm32l053xx.h"

-#include "main.h"

-

-#define rs(x)      x?HAL_GPIO_WritePin(RS_GPIO_Port,RS_Pin,GPIO_PIN_SET):HAL_GPIO_WritePin(RS_GPIO_Port,RS_Pin,GPIO_PIN_RESET)

-#define rw(x)      x?HAL_GPIO_WritePin(RW_GPIO_Port,RW_Pin,GPIO_PIN_SET):HAL_GPIO_WritePin(RW_GPIO_Port,RW_Pin,GPIO_PIN_RESET)

-#define en(x)      x?HAL_GPIO_WritePin(E_GPIO_Port,E_Pin,GPIO_PIN_SET):HAL_GPIO_WritePin(E_GPIO_Port,E_Pin,GPIO_PIN_RESET)

-

-#define d4(x)      x?HAL_GPIO_WritePin(D4_GPIO_Port,D4_Pin,GPIO_PIN_SET):HAL_GPIO_WritePin(D4_GPIO_Port,D4_Pin,GPIO_PIN_RESET)

-#define d5(x)      x?HAL_GPIO_WritePin(D5_GPIO_Port,D5_Pin,GPIO_PIN_SET):HAL_GPIO_WritePin(D5_GPIO_Port,D5_Pin,GPIO_PIN_RESET)

-#define d6(x)      x?HAL_GPIO_WritePin(D6_GPIO_Port,D6_Pin,GPIO_PIN_SET):HAL_GPIO_WritePin(D6_GPIO_Port,D6_Pin,GPIO_PIN_RESET)

-#define d7(x)      x?HAL_GPIO_WritePin(D7_GPIO_Port,D7_Pin,GPIO_PIN_SET):HAL_GPIO_WritePin(D7_GPIO_Port,D7_Pin,GPIO_PIN_RESET)

-

-//#define bl(x)      x?HAL_GPIO_WritePin(BL_GPIO_Port,BL_Pin,GPIO_PIN_SET):HAL_GPIO_WritePin(BL_GPIO_Port,BL_Pin,GPIO_PIN_RESET)

-

-static void lcd_send_4bit(uint8_t data);

-static void lcd_send(int8_t rs,uint8_t data);

-void lcd_cmd(uint8_t command);

-void lcd_data(char c);

-void lcd_init(void);

-void lcd_clr(void);

-void lcd_test(void);

-void lcd_displayOff(void);

-void lcd_gotoxy(char x, char y);

-void lcd_puts(char *text);

-

-#endif

diff --git a/Core/Inc/led.h b/Core/Inc/led.h
deleted file mode 100644
index 50c9084..0000000
--- a/Core/Inc/led.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- * led.h
- *
- *  Created on: 2 déc. 2020
- *      Author: root
- */
-
-#ifndef INC_LED_H_
-#define INC_LED_H_
-
-#include "stm32l053xx.h"
-typedef struct
-{
-GPIO_TypeDef * gpioPort;
-uint16_t pin;
-}LED_TypeDef;
-
-#endif /* INC_LED_H_ */
diff --git a/Core/Inc/main.h b/Core/Inc/main.h
deleted file mode 100644
index 11c7476..0000000
--- a/Core/Inc/main.h
+++ /dev/null
@@ -1,97 +0,0 @@
-/* USER CODE BEGIN Header */

-/**

-  ******************************************************************************

-  * @file           : main.h

-  * @brief          : Header for main.c file.

-  *                   This file contains the common defines of the application.

-  ******************************************************************************

-  * @attention

-  *

-  * <h2><center>&copy; Copyright (c) 2021 STMicroelectronics.

-  * All rights reserved.</center></h2>

-  *

-  * This software component is licensed by ST under BSD 3-Clause license,

-  * the "License"; You may not use this file except in compliance with the

-  * License. You may obtain a copy of the License at:

-  *                        opensource.org/licenses/BSD-3-Clause

-  *

-  ******************************************************************************

-  */

-/* USER CODE END Header */

-

-/* Define to prevent recursive inclusion -------------------------------------*/

-#ifndef __MAIN_H

-#define __MAIN_H

-

-#ifdef __cplusplus

-extern "C" {

-#endif

-

-/* Includes ------------------------------------------------------------------*/

-#include "stm32l0xx_hal.h"

-

-/* Private includes ----------------------------------------------------------*/

-/* USER CODE BEGIN Includes */

-

-/* USER CODE END Includes */

-

-/* Exported types ------------------------------------------------------------*/

-/* USER CODE BEGIN ET */

-

-/* USER CODE END ET */

-

-/* Exported constants --------------------------------------------------------*/

-/* USER CODE BEGIN EC */

-

-/* USER CODE END EC */

-

-/* Exported macro ------------------------------------------------------------*/

-/* USER CODE BEGIN EM */

-

-/* USER CODE END EM */

-

-/* Exported functions prototypes ---------------------------------------------*/

-void Error_Handler(void);

-

-/* USER CODE BEGIN EFP */

-

-/* USER CODE END EFP */

-

-/* Private defines -----------------------------------------------------------*/

-#define B1_Pin GPIO_PIN_13

-#define B1_GPIO_Port GPIOC

-#define USART_TX_Pin GPIO_PIN_2

-#define USART_TX_GPIO_Port GPIOA

-#define USART_RX_Pin GPIO_PIN_3

-#define USART_RX_GPIO_Port GPIOA

-#define LD2_Pin GPIO_PIN_5

-#define LD2_GPIO_Port GPIOA

-#define RS_Pin GPIO_PIN_0

-#define RS_GPIO_Port GPIOB

-#define RW_Pin GPIO_PIN_1

-#define RW_GPIO_Port GPIOB

-#define E_Pin GPIO_PIN_2

-#define E_GPIO_Port GPIOB

-#define TMS_Pin GPIO_PIN_13

-#define TMS_GPIO_Port GPIOA

-#define TCK_Pin GPIO_PIN_14

-#define TCK_GPIO_Port GPIOA

-#define D4_Pin GPIO_PIN_4

-#define D4_GPIO_Port GPIOB

-#define D5_Pin GPIO_PIN_5

-#define D5_GPIO_Port GPIOB

-#define D6_Pin GPIO_PIN_6

-#define D6_GPIO_Port GPIOB

-#define D7_Pin GPIO_PIN_7

-#define D7_GPIO_Port GPIOB

-/* USER CODE BEGIN Private defines */

-

-/* USER CODE END Private defines */

-

-#ifdef __cplusplus

-}

-#endif

-

-#endif /* __MAIN_H */

-

-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

diff --git a/Core/Inc/stm32l0xx_hal_conf.h b/Core/Inc/stm32l0xx_hal_conf.h
deleted file mode 100644
index 5252f0f..0000000
--- a/Core/Inc/stm32l0xx_hal_conf.h
+++ /dev/null
@@ -1,330 +0,0 @@
-/**

-  ******************************************************************************

-  * @file    stm32l0xx_hal_conf.h

-  * @author  MCD Application Team

-  * @brief   HAL configuration template file.

-  *          This file should be copied to the application folder and renamed

-  *          to stm32l0xx_hal_conf.h.

-  ******************************************************************************

-  * @attention

-  *

-  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.

-  * All rights reserved.</center></h2>

-  *

-  * This software component is licensed by ST under BSD 3-Clause license,

-  * the "License"; You may not use this file except in compliance with the

-  * License. You may obtain a copy of the License at:

-  *                        opensource.org/licenses/BSD-3-Clause

-  *

-  ******************************************************************************

-  */

-

-/* Define to prevent recursive inclusion -------------------------------------*/

-#ifndef __STM32L0xx_HAL_CONF_H

-#define __STM32L0xx_HAL_CONF_H

-

-#ifdef __cplusplus

- extern "C" {

-#endif

-

-/* Exported types ------------------------------------------------------------*/

-/* Exported constants --------------------------------------------------------*/

-

-/* ########################## Module Selection ############################## */

-/**

-  * @brief This is the list of modules to be used in the HAL driver

-  */

-

-#define HAL_MODULE_ENABLED

-  /*#define HAL_ADC_MODULE_ENABLED   */

-/*#define HAL_CRYP_MODULE_ENABLED   */

-/*#define HAL_COMP_MODULE_ENABLED   */

-/*#define HAL_CRC_MODULE_ENABLED   */

-/*#define HAL_CRYP_MODULE_ENABLED   */

-/*#define HAL_DAC_MODULE_ENABLED   */

-/*#define HAL_FIREWALL_MODULE_ENABLED   */

-/*#define HAL_I2S_MODULE_ENABLED   */

-/*#define HAL_IWDG_MODULE_ENABLED   */

-/*#define HAL_LCD_MODULE_ENABLED   */

-/*#define HAL_LPTIM_MODULE_ENABLED   */

-/*#define HAL_RNG_MODULE_ENABLED   */

-/*#define HAL_RTC_MODULE_ENABLED   */

-/*#define HAL_SPI_MODULE_ENABLED   */

-/*#define HAL_TIM_MODULE_ENABLED   */

-/*#define HAL_TSC_MODULE_ENABLED   */

-#define HAL_UART_MODULE_ENABLED

-/*#define HAL_USART_MODULE_ENABLED   */

-/*#define HAL_IRDA_MODULE_ENABLED   */

-/*#define HAL_SMARTCARD_MODULE_ENABLED   */

-/*#define HAL_SMBUS_MODULE_ENABLED   */

-/*#define HAL_WWDG_MODULE_ENABLED   */

-/*#define HAL_PCD_MODULE_ENABLED   */

-#define HAL_GPIO_MODULE_ENABLED

-#define HAL_EXTI_MODULE_ENABLED

-#define HAL_DMA_MODULE_ENABLED

-#define HAL_I2C_MODULE_ENABLED

-#define HAL_RCC_MODULE_ENABLED

-#define HAL_FLASH_MODULE_ENABLED

-#define HAL_PWR_MODULE_ENABLED

-#define HAL_CORTEX_MODULE_ENABLED

-

-/* ########################## Oscillator Values adaptation ####################*/

-/**

-  * @brief Adjust the value of External High Speed oscillator (HSE) used in your application.

-  *        This value is used by the RCC HAL module to compute the system frequency

-  *        (when HSE is used as system clock source, directly or through the PLL).

-  */

-#if !defined  (HSE_VALUE)

-  #define HSE_VALUE    ((uint32_t)8000000U) /*!< Value of the External oscillator in Hz */

-#endif /* HSE_VALUE */

-

-#if !defined  (HSE_STARTUP_TIMEOUT)

-  #define HSE_STARTUP_TIMEOUT    ((uint32_t)100U)   /*!< Time out for HSE start up, in ms */

-#endif /* HSE_STARTUP_TIMEOUT */

-

-/**

-  * @brief Internal Multiple Speed oscillator (MSI) default value.

-  *        This value is the default MSI range value after Reset.

-  */

-#if !defined  (MSI_VALUE)

-  #define MSI_VALUE    ((uint32_t)2097000U) /*!< Value of the Internal oscillator in Hz*/

-#endif /* MSI_VALUE */

-

-/**

-  * @brief Internal High Speed oscillator (HSI) value.

-  *        This value is used by the RCC HAL module to compute the system frequency

-  *        (when HSI is used as system clock source, directly or through the PLL).

-  */

-#if !defined  (HSI_VALUE)

-  #define HSI_VALUE    ((uint32_t)16000000U) /*!< Value of the Internal oscillator in Hz*/

-#endif /* HSI_VALUE */

-

-/**

-  * @brief Internal High Speed oscillator for USB (HSI48) value.

-  */

-#if !defined  (HSI48_VALUE)

-#define HSI48_VALUE ((uint32_t)48000000U) /*!< Value of the Internal High Speed oscillator for USB in Hz.

-                                             The real value may vary depending on the variations

-                                             in voltage and temperature.  */

-#endif /* HSI48_VALUE */

-

-/**

-  * @brief Internal Low Speed oscillator (LSI) value.

-  */

-#if !defined  (LSI_VALUE)

- #define LSI_VALUE  ((uint32_t)37000U)       /*!< LSI Typical Value in Hz*/

-#endif /* LSI_VALUE */                      /*!< Value of the Internal Low Speed oscillator in Hz

-                                             The real value may vary depending on the variations

-                                             in voltage and temperature.*/

-/**

-  * @brief External Low Speed oscillator (LSE) value.

-  *        This value is used by the UART, RTC HAL module to compute the system frequency

-  */

-#if !defined  (LSE_VALUE)

-  #define LSE_VALUE    ((uint32_t)32768U) /*!< Value of the External oscillator in Hz*/

-#endif /* LSE_VALUE */

-

-#if !defined  (LSE_STARTUP_TIMEOUT)

-  #define LSE_STARTUP_TIMEOUT  ((uint32_t)5000U)   /*!< Time out for LSE start up, in ms */

-#endif /* LSE_STARTUP_TIMEOUT */

-

-/* Tip: To avoid modifying this file each time you need to use different HSE,

-   ===  you can define the HSE value in your toolchain compiler preprocessor. */

-

-/* ########################### System Configuration ######################### */

-/**

-  * @brief This is the HAL system configuration section

-  */

-#define  VDD_VALUE                    ((uint32_t)3300U) /*!< Value of VDD in mv */

-#define  TICK_INT_PRIORITY            ((uint32_t)0U)    /*!< tick interrupt priority */

-#define  USE_RTOS                     0U

-#define  PREFETCH_ENABLE              0U

-#define  PREREAD_ENABLE               1U

-#define  BUFFER_CACHE_DISABLE         0U

-

-/* ########################## Assert Selection ############################## */

-/**

-  * @brief Uncomment the line below to expanse the "assert_param" macro in the

-  *        HAL drivers code

-  */

-/* #define USE_FULL_ASSERT    1U */

-

-/* ################## Register callback feature configuration ############### */

-/**

-  * @brief Set below the peripheral configuration  to "1U" to add the support

-  *        of HAL callback registration/deregistration feature for the HAL

-  *        driver(s). This allows user application to provide specific callback

-  *        functions thanks to HAL_PPP_RegisterCallback() rather than overwriting

-  *        the default weak callback functions (see each stm32l0xx_hal_ppp.h file

-  *        for possible callback identifiers defined in HAL_PPP_CallbackIDTypeDef

-  *        for each PPP peripheral).

-  */

-#define USE_HAL_ADC_REGISTER_CALLBACKS        0U

-#define USE_HAL_COMP_REGISTER_CALLBACKS       0U

-#define USE_HAL_DAC_REGISTER_CALLBACKS        0U

-#define USE_HAL_I2C_REGISTER_CALLBACKS        0U

-#define USE_HAL_I2S_REGISTER_CALLBACKS        0U

-#define USE_HAL_IRDA_REGISTER_CALLBACKS       0U

-#define USE_HAL_LPTIM_REGISTER_CALLBACKS      0U

-#define USE_HAL_PCD_REGISTER_CALLBACKS        0U

-#define USE_HAL_RNG_REGISTER_CALLBACKS        0U

-#define USE_HAL_RTC_REGISTER_CALLBACKS        0U

-#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS  0U

-#define USE_HAL_SMBUS_REGISTER_CALLBACKS      0U

-#define USE_HAL_SPI_REGISTER_CALLBACKS        0U

-#define USE_HAL_TIM_REGISTER_CALLBACKS        0U

-#define USE_HAL_TSC_REGISTER_CALLBACKS        0U

-#define USE_HAL_UART_REGISTER_CALLBACKS       0U

-#define USE_HAL_USART_REGISTER_CALLBACKS      0U

-#define USE_HAL_WWDG_REGISTER_CALLBACKS       0U

-

-/* Includes ------------------------------------------------------------------*/

-/**

-  * @brief Include module's header file

-  */

-

-#ifdef HAL_RCC_MODULE_ENABLED

-  #include "stm32l0xx_hal_rcc.h"

-#endif /* HAL_RCC_MODULE_ENABLED */

-

-#ifdef HAL_EXTI_MODULE_ENABLED

-  #include "stm32l0xx_hal_exti.h"

-#endif /* HAL_EXTI_MODULE_ENABLED */

-

-#ifdef HAL_GPIO_MODULE_ENABLED

-  #include "stm32l0xx_hal_gpio.h"

-#endif /* HAL_GPIO_MODULE_ENABLED */

-

-#ifdef HAL_DMA_MODULE_ENABLED

-  #include "stm32l0xx_hal_dma.h"

-#endif /* HAL_DMA_MODULE_ENABLED */

-

-#ifdef HAL_CORTEX_MODULE_ENABLED

-  #include "stm32l0xx_hal_cortex.h"

-#endif /* HAL_CORTEX_MODULE_ENABLED */

-

-#ifdef HAL_ADC_MODULE_ENABLED

-  #include "stm32l0xx_hal_adc.h"

-#endif /* HAL_ADC_MODULE_ENABLED */

-

-#ifdef HAL_COMP_MODULE_ENABLED

-  #include "stm32l0xx_hal_comp.h"

-#endif /* HAL_COMP_MODULE_ENABLED */

-

-#ifdef HAL_CRC_MODULE_ENABLED

-  #include "stm32l0xx_hal_crc.h"

-#endif /* HAL_CRC_MODULE_ENABLED */

-

-#ifdef HAL_CRYP_MODULE_ENABLED

-  #include "stm32l0xx_hal_cryp.h"

-#endif /* HAL_CRYP_MODULE_ENABLED */

-

-#ifdef HAL_DAC_MODULE_ENABLED

-  #include "stm32l0xx_hal_dac.h"

-#endif /* HAL_DAC_MODULE_ENABLED */

-

-#ifdef HAL_FIREWALL_MODULE_ENABLED

-  #include "stm32l0xx_hal_firewall.h"

-#endif /* HAL_FIREWALL_MODULE_ENABLED */

-

-#ifdef HAL_FLASH_MODULE_ENABLED

-  #include "stm32l0xx_hal_flash.h"

-#endif /* HAL_FLASH_MODULE_ENABLED */

-

-#ifdef HAL_I2C_MODULE_ENABLED

- #include "stm32l0xx_hal_i2c.h"

-#endif /* HAL_I2C_MODULE_ENABLED */

-

-#ifdef HAL_I2S_MODULE_ENABLED

- #include "stm32l0xx_hal_i2s.h"

-#endif /* HAL_I2S_MODULE_ENABLED */

-

-#ifdef HAL_IWDG_MODULE_ENABLED

- #include "stm32l0xx_hal_iwdg.h"

-#endif /* HAL_IWDG_MODULE_ENABLED */

-

-#ifdef HAL_LCD_MODULE_ENABLED

- #include "stm32l0xx_hal_lcd.h"

-#endif /* HAL_LCD_MODULE_ENABLED */

-

-#ifdef HAL_LPTIM_MODULE_ENABLED

-#include "stm32l0xx_hal_lptim.h"

-#endif /* HAL_LPTIM_MODULE_ENABLED */

-

-#ifdef HAL_PWR_MODULE_ENABLED

- #include "stm32l0xx_hal_pwr.h"

-#endif /* HAL_PWR_MODULE_ENABLED */

-

-#ifdef HAL_RNG_MODULE_ENABLED

- #include "stm32l0xx_hal_rng.h"

-#endif /* HAL_RNG_MODULE_ENABLED */

-

-#ifdef HAL_RTC_MODULE_ENABLED

- #include "stm32l0xx_hal_rtc.h"

-

-#endif /* HAL_RTC_MODULE_ENABLED */

-

-#ifdef HAL_SPI_MODULE_ENABLED

- #include "stm32l0xx_hal_spi.h"

-#endif /* HAL_SPI_MODULE_ENABLED */

-

-#ifdef HAL_TIM_MODULE_ENABLED

- #include "stm32l0xx_hal_tim.h"

-#endif /* HAL_TIM_MODULE_ENABLED */

-

-#ifdef HAL_TSC_MODULE_ENABLED

- #include "stm32l0xx_hal_tsc.h"

-#endif /* HAL_TSC_MODULE_ENABLED */

-

-#ifdef HAL_UART_MODULE_ENABLED

- #include "stm32l0xx_hal_uart.h"

-#endif /* HAL_UART_MODULE_ENABLED */

-

-#ifdef HAL_USART_MODULE_ENABLED

- #include "stm32l0xx_hal_usart.h"

-#endif /* HAL_USART_MODULE_ENABLED */

-

-#ifdef HAL_IRDA_MODULE_ENABLED

- #include "stm32l0xx_hal_irda.h"

-#endif /* HAL_IRDA_MODULE_ENABLED */

-

-#ifdef HAL_SMARTCARD_MODULE_ENABLED

- #include "stm32l0xx_hal_smartcard.h"

-#endif /* HAL_SMARTCARD_MODULE_ENABLED */

-

-#ifdef HAL_SMBUS_MODULE_ENABLED

- #include "stm32l0xx_hal_smbus.h"

-#endif /* HAL_SMBUS_MODULE_ENABLED */

-

-#ifdef HAL_WWDG_MODULE_ENABLED

- #include "stm32l0xx_hal_wwdg.h"

-#endif /* HAL_WWDG_MODULE_ENABLED */

-

-#ifdef HAL_PCD_MODULE_ENABLED

- #include "stm32l0xx_hal_pcd.h"

-#endif /* HAL_PCD_MODULE_ENABLED */

-

-/* Exported macro ------------------------------------------------------------*/

-#ifdef  USE_FULL_ASSERT

-/**

-  * @brief  The assert_param macro is used for function's parameters check.

-  * @param  expr: If expr is false, it calls assert_failed function

-  *         which reports the name of the source file and the source

-  *         line number of the call that failed.

-  *         If expr is true, it returns no value.

-  * @retval None

-  */

-  #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))

-/* Exported functions ------------------------------------------------------- */

-  void assert_failed(uint8_t* file, uint32_t line);

-#else

-  #define assert_param(expr) ((void)0U)

-#endif /* USE_FULL_ASSERT */

-

-#ifdef __cplusplus

-}

-#endif

-

-#endif /* __STM32L0xx_HAL_CONF_H */

-

-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

diff --git a/Core/Inc/stm32l0xx_it.h b/Core/Inc/stm32l0xx_it.h
deleted file mode 100644
index 77cb7bd..0000000
--- a/Core/Inc/stm32l0xx_it.h
+++ /dev/null
@@ -1,65 +0,0 @@
-/* USER CODE BEGIN Header */

-/**

-  ******************************************************************************

-  * @file    stm32l0xx_it.h

-  * @brief   This file contains the headers of the interrupt handlers.

-  ******************************************************************************

-  * @attention

-  *

-  * <h2><center>&copy; Copyright (c) 2021 STMicroelectronics.

-  * All rights reserved.</center></h2>

-  *

-  * This software component is licensed by ST under BSD 3-Clause license,

-  * the "License"; You may not use this file except in compliance with the

-  * License. You may obtain a copy of the License at:

-  *                        opensource.org/licenses/BSD-3-Clause

-  *

- ******************************************************************************

-  */

-/* USER CODE END Header */

-

-/* Define to prevent recursive inclusion -------------------------------------*/

-#ifndef __STM32L0xx_IT_H

-#define __STM32L0xx_IT_H

-

-#ifdef __cplusplus

- extern "C" {

-#endif

-

-/* Private includes ----------------------------------------------------------*/

-/* USER CODE BEGIN Includes */

-

-/* USER CODE END Includes */

-

-/* Exported types ------------------------------------------------------------*/

-/* USER CODE BEGIN ET */

-

-/* USER CODE END ET */

-

-/* Exported constants --------------------------------------------------------*/

-/* USER CODE BEGIN EC */

-

-/* USER CODE END EC */

-

-/* Exported macro ------------------------------------------------------------*/

-/* USER CODE BEGIN EM */

-

-/* USER CODE END EM */

-

-/* Exported functions prototypes ---------------------------------------------*/

-void NMI_Handler(void);

-void HardFault_Handler(void);

-void SVC_Handler(void);

-void PendSV_Handler(void);

-void SysTick_Handler(void);

-/* USER CODE BEGIN EFP */

-

-/* USER CODE END EFP */

-

-#ifdef __cplusplus

-}

-#endif

-

-#endif /* __STM32L0xx_IT_H */

-

-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

diff --git a/Core/Inc/usart.h b/Core/Inc/usart.h
deleted file mode 100644
index 953af0e..0000000
--- a/Core/Inc/usart.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/**

-  ******************************************************************************

-  * @file    usart.h

-  * @brief   This file contains all the function prototypes for

-  *          the usart.c file

-  ******************************************************************************

-  * @attention

-  *

-  * <h2><center>&copy; Copyright (c) 2021 STMicroelectronics.

-  * All rights reserved.</center></h2>

-  *

-  * This software component is licensed by ST under BSD 3-Clause license,

-  * the "License"; You may not use this file except in compliance with the

-  * License. You may obtain a copy of the License at:

-  *                        opensource.org/licenses/BSD-3-Clause

-  *

-  ******************************************************************************

-  */

-/* Define to prevent recursive inclusion -------------------------------------*/

-#ifndef __USART_H__

-#define __USART_H__

-

-#ifdef __cplusplus

-extern "C" {

-#endif

-

-/* Includes ------------------------------------------------------------------*/

-#include "main.h"

-

-/* USER CODE BEGIN Includes */

-

-/* USER CODE END Includes */

-

-extern UART_HandleTypeDef huart2;

-

-/* USER CODE BEGIN Private defines */

-

-/* USER CODE END Private defines */

-

-void MX_USART2_UART_Init(void);

-

-/* USER CODE BEGIN Prototypes */

-

-/* USER CODE END Prototypes */

-

-#ifdef __cplusplus

-}

-#endif

-

-#endif /* __USART_H__ */

-

-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/