From bc481107298791bf0efd984ecc53dc92b8719878 Mon Sep 17 00:00:00 2001 From: Clyhtsuriva Date: Tue, 26 Jan 2021 18:26:26 +0100 Subject: Insertion du projet dans sa totalité MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit --- Core/Inc/button.h | 21 --- Core/Inc/gpio.h | 49 ------- Core/Inc/lcd_1602.h | 28 ---- Core/Inc/led.h | 18 --- Core/Inc/main.h | 97 ------------- Core/Inc/stm32l0xx_hal_conf.h | 330 ------------------------------------------ Core/Inc/stm32l0xx_it.h | 65 --------- Core/Inc/usart.h | 52 ------- 8 files changed, 660 deletions(-) delete mode 100644 Core/Inc/button.h delete mode 100644 Core/Inc/gpio.h delete mode 100644 Core/Inc/lcd_1602.h delete mode 100644 Core/Inc/led.h delete mode 100644 Core/Inc/main.h delete mode 100644 Core/Inc/stm32l0xx_hal_conf.h delete mode 100644 Core/Inc/stm32l0xx_it.h delete mode 100644 Core/Inc/usart.h (limited to 'Core/Inc') diff --git a/Core/Inc/button.h b/Core/Inc/button.h deleted file mode 100644 index fff10b7..0000000 --- a/Core/Inc/button.h +++ /dev/null @@ -1,21 +0,0 @@ -/* - * button.h - * - * Created on: 2 déc. 2020 - * Author: root - */ - -#ifndef INC_BUTTON_H_ -#define INC_BUTTON_H_ - -#include "stm32l053xx.h" - -typedef struct -{ -GPIO_TypeDef * gpioPort; -uint8_t pin; -uint8_t pull; - -}BUTTON_TypeDef; - -#endif /* INC_BUTTON_H_ */ diff --git a/Core/Inc/gpio.h b/Core/Inc/gpio.h deleted file mode 100644 index 5dd191b..0000000 --- a/Core/Inc/gpio.h +++ /dev/null @@ -1,49 +0,0 @@ -/** - ****************************************************************************** - * @file gpio.h - * @brief This file contains all the function prototypes for - * the gpio.c file - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2021 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __GPIO_H__ -#define __GPIO_H__ - -#ifdef __cplusplus -extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "main.h" - -/* USER CODE BEGIN Includes */ - -/* USER CODE END Includes */ - -/* USER CODE BEGIN Private defines */ - -/* USER CODE END Private defines */ - -void MX_GPIO_Init(void); - -/* USER CODE BEGIN Prototypes */ - -/* USER CODE END Prototypes */ - -#ifdef __cplusplus -} -#endif -#endif /*__ GPIO_H__ */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Core/Inc/lcd_1602.h b/Core/Inc/lcd_1602.h deleted file mode 100644 index 5df49f3..0000000 --- a/Core/Inc/lcd_1602.h +++ /dev/null @@ -1,28 +0,0 @@ -#ifndef __LCD_1602_H -#define __LCD_1602_H -#include "stm32l053xx.h" -#include "main.h" - -#define rs(x) x?HAL_GPIO_WritePin(RS_GPIO_Port,RS_Pin,GPIO_PIN_SET):HAL_GPIO_WritePin(RS_GPIO_Port,RS_Pin,GPIO_PIN_RESET) -#define rw(x) x?HAL_GPIO_WritePin(RW_GPIO_Port,RW_Pin,GPIO_PIN_SET):HAL_GPIO_WritePin(RW_GPIO_Port,RW_Pin,GPIO_PIN_RESET) -#define en(x) x?HAL_GPIO_WritePin(E_GPIO_Port,E_Pin,GPIO_PIN_SET):HAL_GPIO_WritePin(E_GPIO_Port,E_Pin,GPIO_PIN_RESET) - -#define d4(x) x?HAL_GPIO_WritePin(D4_GPIO_Port,D4_Pin,GPIO_PIN_SET):HAL_GPIO_WritePin(D4_GPIO_Port,D4_Pin,GPIO_PIN_RESET) -#define d5(x) x?HAL_GPIO_WritePin(D5_GPIO_Port,D5_Pin,GPIO_PIN_SET):HAL_GPIO_WritePin(D5_GPIO_Port,D5_Pin,GPIO_PIN_RESET) -#define d6(x) x?HAL_GPIO_WritePin(D6_GPIO_Port,D6_Pin,GPIO_PIN_SET):HAL_GPIO_WritePin(D6_GPIO_Port,D6_Pin,GPIO_PIN_RESET) -#define d7(x) x?HAL_GPIO_WritePin(D7_GPIO_Port,D7_Pin,GPIO_PIN_SET):HAL_GPIO_WritePin(D7_GPIO_Port,D7_Pin,GPIO_PIN_RESET) - -//#define bl(x) x?HAL_GPIO_WritePin(BL_GPIO_Port,BL_Pin,GPIO_PIN_SET):HAL_GPIO_WritePin(BL_GPIO_Port,BL_Pin,GPIO_PIN_RESET) - -static void lcd_send_4bit(uint8_t data); -static void lcd_send(int8_t rs,uint8_t data); -void lcd_cmd(uint8_t command); -void lcd_data(char c); -void lcd_init(void); -void lcd_clr(void); -void lcd_test(void); -void lcd_displayOff(void); -void lcd_gotoxy(char x, char y); -void lcd_puts(char *text); - -#endif diff --git a/Core/Inc/led.h b/Core/Inc/led.h deleted file mode 100644 index 50c9084..0000000 --- a/Core/Inc/led.h +++ /dev/null @@ -1,18 +0,0 @@ -/* - * led.h - * - * Created on: 2 déc. 2020 - * Author: root - */ - -#ifndef INC_LED_H_ -#define INC_LED_H_ - -#include "stm32l053xx.h" -typedef struct -{ -GPIO_TypeDef * gpioPort; -uint16_t pin; -}LED_TypeDef; - -#endif /* INC_LED_H_ */ diff --git a/Core/Inc/main.h b/Core/Inc/main.h deleted file mode 100644 index 11c7476..0000000 --- a/Core/Inc/main.h +++ /dev/null @@ -1,97 +0,0 @@ -/* USER CODE BEGIN Header */ -/** - ****************************************************************************** - * @file : main.h - * @brief : Header for main.c file. - * This file contains the common defines of the application. - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2021 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ -/* USER CODE END Header */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __MAIN_H -#define __MAIN_H - -#ifdef __cplusplus -extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32l0xx_hal.h" - -/* Private includes ----------------------------------------------------------*/ -/* USER CODE BEGIN Includes */ - -/* USER CODE END Includes */ - -/* Exported types ------------------------------------------------------------*/ -/* USER CODE BEGIN ET */ - -/* USER CODE END ET */ - -/* Exported constants --------------------------------------------------------*/ -/* USER CODE BEGIN EC */ - -/* USER CODE END EC */ - -/* Exported macro ------------------------------------------------------------*/ -/* USER CODE BEGIN EM */ - -/* USER CODE END EM */ - -/* Exported functions prototypes ---------------------------------------------*/ -void Error_Handler(void); - -/* USER CODE BEGIN EFP */ - -/* USER CODE END EFP */ - -/* Private defines -----------------------------------------------------------*/ -#define B1_Pin GPIO_PIN_13 -#define B1_GPIO_Port GPIOC -#define USART_TX_Pin GPIO_PIN_2 -#define USART_TX_GPIO_Port GPIOA -#define USART_RX_Pin GPIO_PIN_3 -#define USART_RX_GPIO_Port GPIOA -#define LD2_Pin GPIO_PIN_5 -#define LD2_GPIO_Port GPIOA -#define RS_Pin GPIO_PIN_0 -#define RS_GPIO_Port GPIOB -#define RW_Pin GPIO_PIN_1 -#define RW_GPIO_Port GPIOB -#define E_Pin GPIO_PIN_2 -#define E_GPIO_Port GPIOB -#define TMS_Pin GPIO_PIN_13 -#define TMS_GPIO_Port GPIOA -#define TCK_Pin GPIO_PIN_14 -#define TCK_GPIO_Port GPIOA -#define D4_Pin GPIO_PIN_4 -#define D4_GPIO_Port GPIOB -#define D5_Pin GPIO_PIN_5 -#define D5_GPIO_Port GPIOB -#define D6_Pin GPIO_PIN_6 -#define D6_GPIO_Port GPIOB -#define D7_Pin GPIO_PIN_7 -#define D7_GPIO_Port GPIOB -/* USER CODE BEGIN Private defines */ - -/* USER CODE END Private defines */ - -#ifdef __cplusplus -} -#endif - -#endif /* __MAIN_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Core/Inc/stm32l0xx_hal_conf.h b/Core/Inc/stm32l0xx_hal_conf.h deleted file mode 100644 index 5252f0f..0000000 --- a/Core/Inc/stm32l0xx_hal_conf.h +++ /dev/null @@ -1,330 +0,0 @@ -/** - ****************************************************************************** - * @file stm32l0xx_hal_conf.h - * @author MCD Application Team - * @brief HAL configuration template file. - * This file should be copied to the application folder and renamed - * to stm32l0xx_hal_conf.h. - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2016 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32L0xx_HAL_CONF_H -#define __STM32L0xx_HAL_CONF_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ - -/* ########################## Module Selection ############################## */ -/** - * @brief This is the list of modules to be used in the HAL driver - */ - -#define HAL_MODULE_ENABLED - /*#define HAL_ADC_MODULE_ENABLED */ -/*#define HAL_CRYP_MODULE_ENABLED */ -/*#define HAL_COMP_MODULE_ENABLED */ -/*#define HAL_CRC_MODULE_ENABLED */ -/*#define HAL_CRYP_MODULE_ENABLED */ -/*#define HAL_DAC_MODULE_ENABLED */ -/*#define HAL_FIREWALL_MODULE_ENABLED */ -/*#define HAL_I2S_MODULE_ENABLED */ -/*#define HAL_IWDG_MODULE_ENABLED */ -/*#define HAL_LCD_MODULE_ENABLED */ -/*#define HAL_LPTIM_MODULE_ENABLED */ -/*#define HAL_RNG_MODULE_ENABLED */ -/*#define HAL_RTC_MODULE_ENABLED */ -/*#define HAL_SPI_MODULE_ENABLED */ -/*#define HAL_TIM_MODULE_ENABLED */ -/*#define HAL_TSC_MODULE_ENABLED */ -#define HAL_UART_MODULE_ENABLED -/*#define HAL_USART_MODULE_ENABLED */ -/*#define HAL_IRDA_MODULE_ENABLED */ -/*#define HAL_SMARTCARD_MODULE_ENABLED */ -/*#define HAL_SMBUS_MODULE_ENABLED */ -/*#define HAL_WWDG_MODULE_ENABLED */ -/*#define HAL_PCD_MODULE_ENABLED */ -#define HAL_GPIO_MODULE_ENABLED -#define HAL_EXTI_MODULE_ENABLED -#define HAL_DMA_MODULE_ENABLED -#define HAL_I2C_MODULE_ENABLED -#define HAL_RCC_MODULE_ENABLED -#define HAL_FLASH_MODULE_ENABLED -#define HAL_PWR_MODULE_ENABLED -#define HAL_CORTEX_MODULE_ENABLED - -/* ########################## Oscillator Values adaptation ####################*/ -/** - * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. - * This value is used by the RCC HAL module to compute the system frequency - * (when HSE is used as system clock source, directly or through the PLL). - */ -#if !defined (HSE_VALUE) - #define HSE_VALUE ((uint32_t)8000000U) /*!< Value of the External oscillator in Hz */ -#endif /* HSE_VALUE */ - -#if !defined (HSE_STARTUP_TIMEOUT) - #define HSE_STARTUP_TIMEOUT ((uint32_t)100U) /*!< Time out for HSE start up, in ms */ -#endif /* HSE_STARTUP_TIMEOUT */ - -/** - * @brief Internal Multiple Speed oscillator (MSI) default value. - * This value is the default MSI range value after Reset. - */ -#if !defined (MSI_VALUE) - #define MSI_VALUE ((uint32_t)2097000U) /*!< Value of the Internal oscillator in Hz*/ -#endif /* MSI_VALUE */ - -/** - * @brief Internal High Speed oscillator (HSI) value. - * This value is used by the RCC HAL module to compute the system frequency - * (when HSI is used as system clock source, directly or through the PLL). - */ -#if !defined (HSI_VALUE) - #define HSI_VALUE ((uint32_t)16000000U) /*!< Value of the Internal oscillator in Hz*/ -#endif /* HSI_VALUE */ - -/** - * @brief Internal High Speed oscillator for USB (HSI48) value. - */ -#if !defined (HSI48_VALUE) -#define HSI48_VALUE ((uint32_t)48000000U) /*!< Value of the Internal High Speed oscillator for USB in Hz. - The real value may vary depending on the variations - in voltage and temperature. */ -#endif /* HSI48_VALUE */ - -/** - * @brief Internal Low Speed oscillator (LSI) value. - */ -#if !defined (LSI_VALUE) - #define LSI_VALUE ((uint32_t)37000U) /*!< LSI Typical Value in Hz*/ -#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz - The real value may vary depending on the variations - in voltage and temperature.*/ -/** - * @brief External Low Speed oscillator (LSE) value. - * This value is used by the UART, RTC HAL module to compute the system frequency - */ -#if !defined (LSE_VALUE) - #define LSE_VALUE ((uint32_t)32768U) /*!< Value of the External oscillator in Hz*/ -#endif /* LSE_VALUE */ - -#if !defined (LSE_STARTUP_TIMEOUT) - #define LSE_STARTUP_TIMEOUT ((uint32_t)5000U) /*!< Time out for LSE start up, in ms */ -#endif /* LSE_STARTUP_TIMEOUT */ - -/* Tip: To avoid modifying this file each time you need to use different HSE, - === you can define the HSE value in your toolchain compiler preprocessor. */ - -/* ########################### System Configuration ######################### */ -/** - * @brief This is the HAL system configuration section - */ -#define VDD_VALUE ((uint32_t)3300U) /*!< Value of VDD in mv */ -#define TICK_INT_PRIORITY ((uint32_t)0U) /*!< tick interrupt priority */ -#define USE_RTOS 0U -#define PREFETCH_ENABLE 0U -#define PREREAD_ENABLE 1U -#define BUFFER_CACHE_DISABLE 0U - -/* ########################## Assert Selection ############################## */ -/** - * @brief Uncomment the line below to expanse the "assert_param" macro in the - * HAL drivers code - */ -/* #define USE_FULL_ASSERT 1U */ - -/* ################## Register callback feature configuration ############### */ -/** - * @brief Set below the peripheral configuration to "1U" to add the support - * of HAL callback registration/deregistration feature for the HAL - * driver(s). This allows user application to provide specific callback - * functions thanks to HAL_PPP_RegisterCallback() rather than overwriting - * the default weak callback functions (see each stm32l0xx_hal_ppp.h file - * for possible callback identifiers defined in HAL_PPP_CallbackIDTypeDef - * for each PPP peripheral). - */ -#define USE_HAL_ADC_REGISTER_CALLBACKS 0U -#define USE_HAL_COMP_REGISTER_CALLBACKS 0U -#define USE_HAL_DAC_REGISTER_CALLBACKS 0U -#define USE_HAL_I2C_REGISTER_CALLBACKS 0U -#define USE_HAL_I2S_REGISTER_CALLBACKS 0U -#define USE_HAL_IRDA_REGISTER_CALLBACKS 0U -#define USE_HAL_LPTIM_REGISTER_CALLBACKS 0U -#define USE_HAL_PCD_REGISTER_CALLBACKS 0U -#define USE_HAL_RNG_REGISTER_CALLBACKS 0U -#define USE_HAL_RTC_REGISTER_CALLBACKS 0U -#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0U -#define USE_HAL_SMBUS_REGISTER_CALLBACKS 0U -#define USE_HAL_SPI_REGISTER_CALLBACKS 0U -#define USE_HAL_TIM_REGISTER_CALLBACKS 0U -#define USE_HAL_TSC_REGISTER_CALLBACKS 0U -#define USE_HAL_UART_REGISTER_CALLBACKS 0U -#define USE_HAL_USART_REGISTER_CALLBACKS 0U -#define USE_HAL_WWDG_REGISTER_CALLBACKS 0U - -/* Includes ------------------------------------------------------------------*/ -/** - * @brief Include module's header file - */ - -#ifdef HAL_RCC_MODULE_ENABLED - #include "stm32l0xx_hal_rcc.h" -#endif /* HAL_RCC_MODULE_ENABLED */ - -#ifdef HAL_EXTI_MODULE_ENABLED - #include "stm32l0xx_hal_exti.h" -#endif /* HAL_EXTI_MODULE_ENABLED */ - -#ifdef HAL_GPIO_MODULE_ENABLED - #include "stm32l0xx_hal_gpio.h" -#endif /* HAL_GPIO_MODULE_ENABLED */ - -#ifdef HAL_DMA_MODULE_ENABLED - #include "stm32l0xx_hal_dma.h" -#endif /* HAL_DMA_MODULE_ENABLED */ - -#ifdef HAL_CORTEX_MODULE_ENABLED - #include "stm32l0xx_hal_cortex.h" -#endif /* HAL_CORTEX_MODULE_ENABLED */ - -#ifdef HAL_ADC_MODULE_ENABLED - #include "stm32l0xx_hal_adc.h" -#endif /* HAL_ADC_MODULE_ENABLED */ - -#ifdef HAL_COMP_MODULE_ENABLED - #include "stm32l0xx_hal_comp.h" -#endif /* HAL_COMP_MODULE_ENABLED */ - -#ifdef HAL_CRC_MODULE_ENABLED - #include "stm32l0xx_hal_crc.h" -#endif /* HAL_CRC_MODULE_ENABLED */ - -#ifdef HAL_CRYP_MODULE_ENABLED - #include "stm32l0xx_hal_cryp.h" -#endif /* HAL_CRYP_MODULE_ENABLED */ - -#ifdef HAL_DAC_MODULE_ENABLED - #include "stm32l0xx_hal_dac.h" -#endif /* HAL_DAC_MODULE_ENABLED */ - -#ifdef HAL_FIREWALL_MODULE_ENABLED - #include "stm32l0xx_hal_firewall.h" -#endif /* HAL_FIREWALL_MODULE_ENABLED */ - -#ifdef HAL_FLASH_MODULE_ENABLED - #include "stm32l0xx_hal_flash.h" -#endif /* HAL_FLASH_MODULE_ENABLED */ - -#ifdef HAL_I2C_MODULE_ENABLED - #include "stm32l0xx_hal_i2c.h" -#endif /* HAL_I2C_MODULE_ENABLED */ - -#ifdef HAL_I2S_MODULE_ENABLED - #include "stm32l0xx_hal_i2s.h" -#endif /* HAL_I2S_MODULE_ENABLED */ - -#ifdef HAL_IWDG_MODULE_ENABLED - #include "stm32l0xx_hal_iwdg.h" -#endif /* HAL_IWDG_MODULE_ENABLED */ - -#ifdef HAL_LCD_MODULE_ENABLED - #include "stm32l0xx_hal_lcd.h" -#endif /* HAL_LCD_MODULE_ENABLED */ - -#ifdef HAL_LPTIM_MODULE_ENABLED -#include "stm32l0xx_hal_lptim.h" -#endif /* HAL_LPTIM_MODULE_ENABLED */ - -#ifdef HAL_PWR_MODULE_ENABLED - #include "stm32l0xx_hal_pwr.h" -#endif /* HAL_PWR_MODULE_ENABLED */ - -#ifdef HAL_RNG_MODULE_ENABLED - #include "stm32l0xx_hal_rng.h" -#endif /* HAL_RNG_MODULE_ENABLED */ - -#ifdef HAL_RTC_MODULE_ENABLED - #include "stm32l0xx_hal_rtc.h" - -#endif /* HAL_RTC_MODULE_ENABLED */ - -#ifdef HAL_SPI_MODULE_ENABLED - #include "stm32l0xx_hal_spi.h" -#endif /* HAL_SPI_MODULE_ENABLED */ - -#ifdef HAL_TIM_MODULE_ENABLED - #include "stm32l0xx_hal_tim.h" -#endif /* HAL_TIM_MODULE_ENABLED */ - -#ifdef HAL_TSC_MODULE_ENABLED - #include "stm32l0xx_hal_tsc.h" -#endif /* HAL_TSC_MODULE_ENABLED */ - -#ifdef HAL_UART_MODULE_ENABLED - #include "stm32l0xx_hal_uart.h" -#endif /* HAL_UART_MODULE_ENABLED */ - -#ifdef HAL_USART_MODULE_ENABLED - #include "stm32l0xx_hal_usart.h" -#endif /* HAL_USART_MODULE_ENABLED */ - -#ifdef HAL_IRDA_MODULE_ENABLED - #include "stm32l0xx_hal_irda.h" -#endif /* HAL_IRDA_MODULE_ENABLED */ - -#ifdef HAL_SMARTCARD_MODULE_ENABLED - #include "stm32l0xx_hal_smartcard.h" -#endif /* HAL_SMARTCARD_MODULE_ENABLED */ - -#ifdef HAL_SMBUS_MODULE_ENABLED - #include "stm32l0xx_hal_smbus.h" -#endif /* HAL_SMBUS_MODULE_ENABLED */ - -#ifdef HAL_WWDG_MODULE_ENABLED - #include "stm32l0xx_hal_wwdg.h" -#endif /* HAL_WWDG_MODULE_ENABLED */ - -#ifdef HAL_PCD_MODULE_ENABLED - #include "stm32l0xx_hal_pcd.h" -#endif /* HAL_PCD_MODULE_ENABLED */ - -/* Exported macro ------------------------------------------------------------*/ -#ifdef USE_FULL_ASSERT -/** - * @brief The assert_param macro is used for function's parameters check. - * @param expr: If expr is false, it calls assert_failed function - * which reports the name of the source file and the source - * line number of the call that failed. - * If expr is true, it returns no value. - * @retval None - */ - #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) -/* Exported functions ------------------------------------------------------- */ - void assert_failed(uint8_t* file, uint32_t line); -#else - #define assert_param(expr) ((void)0U) -#endif /* USE_FULL_ASSERT */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32L0xx_HAL_CONF_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Core/Inc/stm32l0xx_it.h b/Core/Inc/stm32l0xx_it.h deleted file mode 100644 index 77cb7bd..0000000 --- a/Core/Inc/stm32l0xx_it.h +++ /dev/null @@ -1,65 +0,0 @@ -/* USER CODE BEGIN Header */ -/** - ****************************************************************************** - * @file stm32l0xx_it.h - * @brief This file contains the headers of the interrupt handlers. - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2021 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ -/* USER CODE END Header */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32L0xx_IT_H -#define __STM32L0xx_IT_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Private includes ----------------------------------------------------------*/ -/* USER CODE BEGIN Includes */ - -/* USER CODE END Includes */ - -/* Exported types ------------------------------------------------------------*/ -/* USER CODE BEGIN ET */ - -/* USER CODE END ET */ - -/* Exported constants --------------------------------------------------------*/ -/* USER CODE BEGIN EC */ - -/* USER CODE END EC */ - -/* Exported macro ------------------------------------------------------------*/ -/* USER CODE BEGIN EM */ - -/* USER CODE END EM */ - -/* Exported functions prototypes ---------------------------------------------*/ -void NMI_Handler(void); -void HardFault_Handler(void); -void SVC_Handler(void); -void PendSV_Handler(void); -void SysTick_Handler(void); -/* USER CODE BEGIN EFP */ - -/* USER CODE END EFP */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32L0xx_IT_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Core/Inc/usart.h b/Core/Inc/usart.h deleted file mode 100644 index 953af0e..0000000 --- a/Core/Inc/usart.h +++ /dev/null @@ -1,52 +0,0 @@ -/** - ****************************************************************************** - * @file usart.h - * @brief This file contains all the function prototypes for - * the usart.c file - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2021 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __USART_H__ -#define __USART_H__ - -#ifdef __cplusplus -extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "main.h" - -/* USER CODE BEGIN Includes */ - -/* USER CODE END Includes */ - -extern UART_HandleTypeDef huart2; - -/* USER CODE BEGIN Private defines */ - -/* USER CODE END Private defines */ - -void MX_USART2_UART_Init(void); - -/* USER CODE BEGIN Prototypes */ - -/* USER CODE END Prototypes */ - -#ifdef __cplusplus -} -#endif - -#endif /* __USART_H__ */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ -- cgit v1.2.3