diff options
Diffstat (limited to 'simonnnnn/Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal.h')
| -rw-r--r-- | simonnnnn/Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal.h | 487 |
1 files changed, 487 insertions, 0 deletions
diff --git a/simonnnnn/Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal.h b/simonnnnn/Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal.h new file mode 100644 index 0000000..7d227fb --- /dev/null +++ b/simonnnnn/Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal.h @@ -0,0 +1,487 @@ +/**
+ ******************************************************************************
+ * @file stm32l0xx_hal.h
+ * @author MCD Application Team
+ * @brief This file contains all the functions prototypes for the HAL
+ * module driver.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© Copyright (c) 2016 STMicroelectronics.
+ * All rights reserved.</center></h2>
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32L0xx_HAL_H
+#define __STM32L0xx_HAL_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32l0xx_hal_conf.h"
+
+/** @addtogroup STM32L0xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup HAL HAL
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup HAL_Exported_Constants HAL Exported Constants
+ * @{
+ */
+
+/** @defgroup HAL_TICK_FREQ Tick Frequency
+ * @{
+ */
+typedef enum
+{
+ HAL_TICK_FREQ_10HZ = 100U,
+ HAL_TICK_FREQ_100HZ = 10U,
+ HAL_TICK_FREQ_1KHZ = 1U,
+ HAL_TICK_FREQ_DEFAULT = HAL_TICK_FREQ_1KHZ
+} HAL_TickFreqTypeDef;
+/**
+ * @}
+ */
+
+/** @defgroup SYSCFG_BootMode Boot Mode
+ * @{
+ */
+#define SYSCFG_BOOT_MAINFLASH (0x00000000U)
+#define SYSCFG_BOOT_SYSTEMFLASH SYSCFG_CFGR1_BOOT_MODE_0
+#define SYSCFG_BOOT_SRAM SYSCFG_CFGR1_BOOT_MODE
+
+/**
+ * @}
+ */
+
+/** @defgroup DBGMCU_Low_Power_Config DBGMCU Low Power Configuration
+ * @{
+ */
+#define DBGMCU_SLEEP DBGMCU_CR_DBG_SLEEP
+#define DBGMCU_STOP DBGMCU_CR_DBG_STOP
+#define DBGMCU_STANDBY DBGMCU_CR_DBG_STANDBY
+#define IS_DBGMCU_PERIPH(__PERIPH__) ((((__PERIPH__) & (~(DBGMCU_CR_DBG))) == 0x00U) && ((__PERIPH__) != 0x00U))
+
+
+/**
+ * @}
+ */
+
+#if defined (LCD_BASE) /* STM32L0x3xx only */
+/** @defgroup SYSCFG_LCD_EXT_CAPA SYSCFG LCD External Capacitors
+ * @{
+ */
+#define SYSCFG_LCD_EXT_CAPA SYSCFG_CFGR2_CAPA /*!< Connection of internal Vlcd rail to external capacitors */
+#define SYSCFG_VLCD_PB2_EXT_CAPA_ON SYSCFG_CFGR2_CAPA_0 /*!< Connection on PB2 */
+#define SYSCFG_VLCD_PB12_EXT_CAPA_ON SYSCFG_CFGR2_CAPA_1 /*!< Connection on PB12 */
+#define SYSCFG_VLCD_PB0_EXT_CAPA_ON SYSCFG_CFGR2_CAPA_2 /*!< Connection on PB0 */
+#if defined (SYSCFG_CFGR2_CAPA_3)
+#define SYSCFG_VLCD_PE11_EXT_CAPA_ON SYSCFG_CFGR2_CAPA_3 /*!< Connection on PE11 */
+#endif
+#if defined (SYSCFG_CFGR2_CAPA_4)
+#define SYSCFG_VLCD_PE12_EXT_CAPA_ON SYSCFG_CFGR2_CAPA_4 /*!< Connection on PE12 */
+#endif
+
+/**
+ * @}
+ */
+#endif
+
+/** @defgroup SYSCFG_VREFINT_OUT_SELECT SYSCFG VREFINT Out Selection
+ * @{
+ */
+#define SYSCFG_VREFINT_OUT_NONE (0x00000000U) /* no pad connected */
+#define SYSCFG_VREFINT_OUT_PB0 SYSCFG_CFGR3_VREF_OUT_0 /* Selects PBO as output for the Vrefint */
+#define SYSCFG_VREFINT_OUT_PB1 SYSCFG_CFGR3_VREF_OUT_1 /* Selects PB1 as output for the Vrefint */
+#define SYSCFG_VREFINT_OUT_PB0_PB1 SYSCFG_CFGR3_VREF_OUT /* Selects PBO and PB1 as output for the Vrefint */
+
+#define IS_SYSCFG_VREFINT_OUT_SELECT(OUTPUT) (((OUTPUT) == SYSCFG_VREFINT_OUT_NONE) || \
+ ((OUTPUT) == SYSCFG_VREFINT_OUT_PB0) || \
+ ((OUTPUT) == SYSCFG_VREFINT_OUT_PB1) || \
+ ((OUTPUT) == SYSCFG_VREFINT_OUT_PB0_PB1))
+/**
+ * @}
+ */
+
+/** @defgroup SYSCFG_flags_definition SYSCFG Flags Definition
+ * @{
+ */
+#define SYSCFG_FLAG_VREFINT_READY SYSCFG_CFGR3_VREFINT_RDYF
+
+#define IS_SYSCFG_FLAG(FLAG) ((FLAG) == SYSCFG_FLAG_VREFINT_READY))
+
+/**
+ * @}
+ */
+
+/** @defgroup SYSCFG_FastModePlus_GPIO Fast Mode Plus on GPIO
+ * @{
+ */
+/** @brief Fast mode Plus driving capability on a specific GPIO
+ */
+#if defined (SYSCFG_CFGR2_I2C_PB6_FMP)
+#define SYSCFG_FASTMODEPLUS_PB6 SYSCFG_CFGR2_I2C_PB6_FMP /* Enable Fast Mode Plus on PB6 */
+#endif
+#if defined (SYSCFG_CFGR2_I2C_PB7_FMP)
+#define SYSCFG_FASTMODEPLUS_PB7 SYSCFG_CFGR2_I2C_PB7_FMP /* Enable Fast Mode Plus on PB7 */
+#endif
+#if defined (SYSCFG_CFGR2_I2C_PB8_FMP)
+#define SYSCFG_FASTMODEPLUS_PB8 SYSCFG_CFGR2_I2C_PB8_FMP /* Enable Fast Mode Plus on PB8 */
+#endif
+#if defined (SYSCFG_CFGR2_I2C_PB9_FMP)
+#define SYSCFG_FASTMODEPLUS_PB9 SYSCFG_CFGR2_I2C_PB9_FMP /* Enable Fast Mode Plus on PB9 */
+#endif
+
+#define IS_SYSCFG_FASTMODEPLUS(PIN) ((((PIN) & (SYSCFG_FASTMODEPLUS_PB6)) == SYSCFG_FASTMODEPLUS_PB6) || \
+ (((PIN) & (SYSCFG_FASTMODEPLUS_PB7)) == SYSCFG_FASTMODEPLUS_PB7) || \
+ (((PIN) & (SYSCFG_FASTMODEPLUS_PB8)) == SYSCFG_FASTMODEPLUS_PB8) || \
+ (((PIN) & (SYSCFG_FASTMODEPLUS_PB9)) == SYSCFG_FASTMODEPLUS_PB9) )
+/**
+ * @}
+ */
+ /**
+ * @}
+ */
+
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup HAL_Exported_Macros HAL Exported Macros
+ * @{
+ */
+
+/** @brief Freeze/Unfreeze Peripherals in Debug mode
+ */
+#if defined (DBGMCU_APB1_FZ_DBG_TIM2_STOP)
+/**
+ * @brief TIM2 Peripherals Debug mode
+ */
+#define __HAL_DBGMCU_FREEZE_TIM2() SET_BIT(DBGMCU->APB1FZ,DBGMCU_APB1_FZ_DBG_TIM2_STOP)
+#define __HAL_DBGMCU_UNFREEZE_TIM2() CLEAR_BIT(DBGMCU->APB1FZ,DBGMCU_APB1_FZ_DBG_TIM2_STOP)
+#endif
+
+#if defined (DBGMCU_APB1_FZ_DBG_TIM3_STOP)
+/**
+ * @brief TIM3 Peripherals Debug mode
+ */
+#define __HAL_DBGMCU_FREEZE_TIM3() SET_BIT(DBGMCU->APB1FZ,DBGMCU_APB1_FZ_DBG_TIM3_STOP)
+#define __HAL_DBGMCU_UNFREEZE_TIM3() CLEAR_BIT(DBGMCU->APB1FZ,DBGMCU_APB1_FZ_DBG_TIM3_STOP)
+#endif
+
+#if defined (DBGMCU_APB1_FZ_DBG_TIM6_STOP)
+/**
+ * @brief TIM6 Peripherals Debug mode
+ */
+#define __HAL_DBGMCU_FREEZE_TIM6() SET_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_TIM6_STOP)
+#define __HAL_DBGMCU_UNFREEZE_TIM6() CLEAR_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_TIM6_STOP)
+#endif
+
+#if defined (DBGMCU_APB1_FZ_DBG_TIM7_STOP)
+/**
+ * @brief TIM7 Peripherals Debug mode
+ */
+#define __HAL_DBGMCU_FREEZE_TIM7() SET_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_TIM7_STOP)
+#define __HAL_DBGMCU_UNFREEZE_TIM7() CLEAR_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_TIM7_STOP)
+#endif
+
+#if defined (DBGMCU_APB1_FZ_DBG_RTC_STOP)
+/**
+ * @brief RTC Peripherals Debug mode
+ */
+#define __HAL_DBGMCU_FREEZE_RTC() SET_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_RTC_STOP)
+#define __HAL_DBGMCU_UNFREEZE_RTC() CLEAR_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_RTC_STOP)
+#endif
+
+#if defined (DBGMCU_APB1_FZ_DBG_WWDG_STOP)
+/**
+ * @brief WWDG Peripherals Debug mode
+ */
+#define __HAL_DBGMCU_FREEZE_WWDG() SET_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_WWDG_STOP)
+#define __HAL_DBGMCU_UNFREEZE_WWDG() CLEAR_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_WWDG_STOP)
+#endif
+
+#if defined (DBGMCU_APB1_FZ_DBG_IWDG_STOP)
+/**
+ * @brief IWDG Peripherals Debug mode
+ */
+#define __HAL_DBGMCU_FREEZE_IWDG() SET_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_IWDG_STOP)
+#define __HAL_DBGMCU_UNFREEZE_IWDG() CLEAR_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_IWDG_STOP)
+#endif
+
+#if defined (DBGMCU_APB1_FZ_DBG_I2C1_STOP)
+/**
+ * @brief I2C1 Peripherals Debug mode
+ */
+#define __HAL_DBGMCU_FREEZE_I2C1_TIMEOUT() SET_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_I2C1_STOP)
+#define __HAL_DBGMCU_UNFREEZE_I2C1_TIMEOUT_DBGMCU() CLEAR_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_I2C1_STOP)
+#endif
+
+#if defined (DBGMCU_APB1_FZ_DBG_I2C2_STOP)
+/**
+ * @brief I2C2 Peripherals Debug mode
+ */
+#define __HAL_DBGMCU_FREEZE_I2C2_TIMEOUT_DBGMCU() SET_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_I2C2_STOP)
+#define __HAL_DBGMCU_UNFREEZE_I2C2_TIMEOUT_DBGMCU() CLEAR_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_I2C2_STOP)
+#endif
+
+#if defined (DBGMCU_APB1_FZ_DBG_I2C3_STOP)
+/**
+ * @brief I2C3 Peripherals Debug mode
+ */
+#define __HAL_DBGMCU_FREEZE_I2C3_TIMEOUT() SET_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_I2C3_STOP)
+#define __HAL_DBGMCU_UNFREEZE_I2C3_TIMEOUT() CLEAR_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_I2C3_STOP)
+#endif
+
+#if defined (DBGMCU_APB1_FZ_DBG_LPTIMER_STOP)
+/**
+ * @brief LPTIMER Peripherals Debug mode
+ */
+#define __HAL_DBGMCU_FREEZE_LPTIMER() SET_BIT(DBGMCU->APB1FZ ,DBGMCU_APB1_FZ_DBG_LPTIMER_STOP)
+#define __HAL_DBGMCU_UNFREEZE_LPTIMER() CLEAR_BIT(DBGMCU->APB1FZ ,DBGMCU_APB1_FZ_DBG_LPTIMER_STOP)
+#endif
+
+#if defined (DBGMCU_APB2_FZ_DBG_TIM22_STOP)
+/**
+ * @brief TIM22 Peripherals Debug mode
+ */
+#define __HAL_DBGMCU_FREEZE_TIM22() SET_BIT(DBGMCU->APB2FZ, DBGMCU_APB2_FZ_DBG_TIM22_STOP)
+#define __HAL_DBGMCU_UNFREEZE_TIM22() CLEAR_BIT(DBGMCU->APB2FZ, DBGMCU_APB2_FZ_DBG_TIM22_STOP)
+#endif
+
+#if defined (DBGMCU_APB2_FZ_DBG_TIM21_STOP)
+/**
+ * @brief TIM21 Peripherals Debug mode
+ */
+#define __HAL_DBGMCU_FREEZE_TIM21() SET_BIT(DBGMCU->APB2FZ, DBGMCU_APB2_FZ_DBG_TIM21_STOP)
+#define __HAL_DBGMCU_UNFREEZE_TIM21() CLEAR_BIT(DBGMCU->APB2FZ, DBGMCU_APB2_FZ_DBG_TIM21_STOP)
+#endif
+
+/** @brief Main Flash memory mapped at 0x00000000
+ */
+#define __HAL_SYSCFG_REMAPMEMORY_FLASH() CLEAR_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_MEM_MODE)
+
+/** @brief System Flash memory mapped at 0x00000000
+ */
+#define __HAL_SYSCFG_REMAPMEMORY_SYSTEMFLASH() MODIFY_REG(SYSCFG->CFGR1, SYSCFG_CFGR1_MEM_MODE, SYSCFG_CFGR1_MEM_MODE_0)
+
+
+/** @brief Embedded SRAM mapped at 0x00000000
+ */
+#define __HAL_SYSCFG_REMAPMEMORY_SRAM() MODIFY_REG(SYSCFG->CFGR1, SYSCFG_CFGR1_MEM_MODE, SYSCFG_CFGR1_MEM_MODE_0 | SYSCFG_CFGR1_MEM_MODE_1)
+
+/** @brief Configuration of the DBG Low Power mode.
+ * @param __DBGLPMODE__ bit field to indicate in wich Low Power mode DBG is still active.
+ * This parameter can be a value of
+ * - DBGMCU_SLEEP
+ * - DBGMCU_STOP
+ * - DBGMCU_STANDBY
+ */
+#define __HAL_SYSCFG_DBG_LP_CONFIG(__DBGLPMODE__) do {assert_param(IS_DBGMCU_PERIPH(__DBGLPMODE__)); \
+ MODIFY_REG(DBGMCU->CR, DBGMCU_CR_DBG, (__DBGLPMODE__)); \
+ } while (0)
+
+#if defined (LCD_BASE) /* STM32L0x3xx only */
+
+/** @brief Macro to configure the VLCD Decoupling capacitance connection.
+ *
+ * @param __SYSCFG_VLCD_CAPA__ specifies the decoupling of LCD capacitance for rails connection on GPIO.
+ * This parameter can be a combination of following values (when available):
+ * @arg SYSCFG_VLCD_PB2_EXT_CAPA_ON: Connection on PB2
+ * @arg SYSCFG_VLCD_PB12_EXT_CAPA_ON: Connection on PB12
+ * @arg SYSCFG_VLCD_PB0_EXT_CAPA_ON: Connection on PB0
+ * @arg SYSCFG_VLCD_PE11_EXT_CAPA_ON: Connection on PE11
+ * @arg SYSCFG_VLCD_PE12_EXT_CAPA_ON: Connection on PE12
+ * @retval None
+ */
+#define __HAL_SYSCFG_VLCD_CAPA_CONFIG(__SYSCFG_VLCD_CAPA__) \
+ MODIFY_REG(SYSCFG->CFGR2, SYSCFG_LCD_EXT_CAPA, (uint32_t)(__SYSCFG_VLCD_CAPA__))
+
+/**
+ * @brief Returns the decoupling of LCD capacitance configured by user.
+ * @retval The LCD capacitance connection as configured by user. The returned can be a combination of :
+ * SYSCFG_VLCD_PB2_EXT_CAPA_ON: Connection on PB2
+ * SYSCFG_VLCD_PB12_EXT_CAPA_ON: Connection on PB12
+ * SYSCFG_VLCD_PB0_EXT_CAPA_ON: Connection on PB0
+ * SYSCFG_VLCD_PE11_EXT_CAPA_ON: Connection on PE11
+ * SYSCFG_VLCD_PE12_EXT_CAPA_ON: Connection on PE12
+ */
+#define __HAL_SYSCFG_GET_VLCD_CAPA_CONFIG() READ_BIT(SYSCFG->CFGR2, SYSCFG_LCD_EXT_CAPA)
+
+#endif
+
+/**
+ * @brief Returns the boot mode as configured by user.
+ * @retval The boot mode as configured by user. The returned can be a value of :
+ * - SYSCFG_BOOT_MAINFLASH
+ * - SYSCFG_BOOT_SYSTEMFLASH
+ * - SYSCFG_BOOT_SRAM
+ */
+#define __HAL_SYSCFG_GET_BOOT_MODE() READ_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_BOOT_MODE)
+
+
+/** @brief Check whether the specified SYSCFG flag is set or not.
+ * @param __FLAG__ specifies the flag to check.
+ * The only parameter supported is SYSCFG_FLAG_VREFINT_READY
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define __HAL_SYSCFG_GET_FLAG(__FLAG__) (((SYSCFG->CFGR3) & (__FLAG__)) == (__FLAG__))
+
+/** @brief Fast mode Plus driving capability enable macro
+ * @param __FASTMODEPLUS__ This parameter can be a value of :
+ * @arg SYSCFG_FASTMODEPLUS_PB6
+ * @arg SYSCFG_FASTMODEPLUS_PB7
+ * @arg SYSCFG_FASTMODEPLUS_PB8
+ * @arg SYSCFG_FASTMODEPLUS_PB9
+ */
+#define __HAL_SYSCFG_FASTMODEPLUS_ENABLE(__FASTMODEPLUS__) do {assert_param(IS_SYSCFG_FASTMODEPLUS((__FASTMODEPLUS__))); \
+ SET_BIT(SYSCFG->CFGR2, (__FASTMODEPLUS__)); \
+ }while(0)
+/** @brief Fast mode Plus driving capability disable macro
+ * @param __FASTMODEPLUS__ This parameter can be a value of :
+ * @arg SYSCFG_FASTMODEPLUS_PB6
+ * @arg SYSCFG_FASTMODEPLUS_PB7
+ * @arg SYSCFG_FASTMODEPLUS_PB8
+ * @arg SYSCFG_FASTMODEPLUS_PB9
+ */
+#define __HAL_SYSCFG_FASTMODEPLUS_DISABLE(__FASTMODEPLUS__) do {assert_param(IS_SYSCFG_FASTMODEPLUS((__FASTMODEPLUS__))); \
+ CLEAR_BIT(SYSCFG->CFGR2, (__FASTMODEPLUS__)); \
+ }while(0)
+
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_Private_Macros HAL Private Macros
+ * @{
+ */
+#define IS_TICKFREQ(FREQ) (((FREQ) == HAL_TICK_FREQ_10HZ) || \
+ ((FREQ) == HAL_TICK_FREQ_100HZ) || \
+ ((FREQ) == HAL_TICK_FREQ_1KHZ))
+/**
+ * @}
+ */
+
+/* Exported variables --------------------------------------------------------*/
+/** @defgroup HAL_Exported_Variables HAL Exported Variables
+ * @{
+ */
+extern __IO uint32_t uwTick;
+extern uint32_t uwTickPrio;
+extern HAL_TickFreqTypeDef uwTickFreq;
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup HAL_Exported_Functions HAL Exported Functions
+ * @{
+ */
+/** @defgroup HAL_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @brief Initialization and de-initialization functions
+ * @{
+ */
+HAL_StatusTypeDef HAL_Init(void);
+HAL_StatusTypeDef HAL_DeInit(void);
+void HAL_MspInit(void);
+void HAL_MspDeInit(void);
+HAL_StatusTypeDef HAL_InitTick(uint32_t TickPriority);
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_Exported_Functions_Group2 Peripheral Control functions
+ * @brief Peripheral Control functions
+ * @{
+ */
+void HAL_IncTick(void);
+void HAL_Delay(uint32_t Delay);
+uint32_t HAL_GetTick(void);
+uint32_t HAL_GetTickPrio(void);
+HAL_StatusTypeDef HAL_SetTickFreq(HAL_TickFreqTypeDef Freq);
+HAL_TickFreqTypeDef HAL_GetTickFreq(void);
+void HAL_SuspendTick(void);
+void HAL_ResumeTick(void);
+uint32_t HAL_GetHalVersion(void);
+uint32_t HAL_GetREVID(void);
+uint32_t HAL_GetDEVID(void);
+uint32_t HAL_GetUIDw0(void);
+uint32_t HAL_GetUIDw1(void);
+uint32_t HAL_GetUIDw2(void);
+/**
+ * @}
+ */
+
+/** @defgroup HAL_Exported_Functions_Group3 DBGMCU Peripheral Control functions
+ * @brief DBGMCU Peripheral Control functions
+ * @{
+ */
+void HAL_DBGMCU_EnableDBGSleepMode(void);
+void HAL_DBGMCU_DisableDBGSleepMode(void);
+void HAL_DBGMCU_EnableDBGStopMode(void);
+void HAL_DBGMCU_DisableDBGStopMode(void);
+void HAL_DBGMCU_EnableDBGStandbyMode(void);
+void HAL_DBGMCU_DisableDBGStandbyMode(void);
+void HAL_DBGMCU_DBG_EnableLowPowerConfig(uint32_t Periph);
+void HAL_DBGMCU_DBG_DisableLowPowerConfig(uint32_t Periph);
+/**
+ * @}
+ */
+
+/** @defgroup HAL_Exported_Functions_Group4 SYSCFG Peripheral Control functions
+ * @brief SYSCFG Peripheral Control functions
+ * @{
+ */
+uint32_t HAL_SYSCFG_GetBootMode(void);
+void HAL_SYSCFG_Enable_Lock_VREFINT(void);
+void HAL_SYSCFG_Disable_Lock_VREFINT(void);
+void HAL_SYSCFG_VREFINT_OutputSelect(uint32_t SYSCFG_Vrefint_OUTPUT);
+/**
+ * @}
+ */
+/**
+ * @}
+ */
+
+/* Define the private group ***********************************/
+/**************************************************************/
+/** @defgroup HAL_Private HAL Private
+ * @{
+ */
+/**
+ * @}
+ */
+/**************************************************************/
+
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32L0xx_HAL_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
|