summaryrefslogtreecommitdiff
path: root/Core/Inc
diff options
context:
space:
mode:
Diffstat (limited to 'Core/Inc')
-rw-r--r--Core/Inc/button.h21
-rw-r--r--Core/Inc/gpio.h49
-rw-r--r--Core/Inc/lcd_1602.h28
-rw-r--r--Core/Inc/led.h18
-rw-r--r--Core/Inc/main.h97
-rw-r--r--Core/Inc/stm32l0xx_hal_conf.h330
-rw-r--r--Core/Inc/stm32l0xx_it.h65
-rw-r--r--Core/Inc/usart.h52
8 files changed, 0 insertions, 660 deletions
diff --git a/Core/Inc/button.h b/Core/Inc/button.h
deleted file mode 100644
index fff10b7..0000000
--- a/Core/Inc/button.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * button.h
- *
- * Created on: 2 déc. 2020
- * Author: root
- */
-
-#ifndef INC_BUTTON_H_
-#define INC_BUTTON_H_
-
-#include "stm32l053xx.h"
-
-typedef struct
-{
-GPIO_TypeDef * gpioPort;
-uint8_t pin;
-uint8_t pull;
-
-}BUTTON_TypeDef;
-
-#endif /* INC_BUTTON_H_ */
diff --git a/Core/Inc/gpio.h b/Core/Inc/gpio.h
deleted file mode 100644
index 5dd191b..0000000
--- a/Core/Inc/gpio.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/**
- ******************************************************************************
- * @file gpio.h
- * @brief This file contains all the function prototypes for
- * the gpio.c file
- ******************************************************************************
- * @attention
- *
- * <h2><center>&copy; Copyright (c) 2021 STMicroelectronics.
- * All rights reserved.</center></h2>
- *
- * This software component is licensed by ST under BSD 3-Clause license,
- * the "License"; You may not use this file except in compliance with the
- * License. You may obtain a copy of the License at:
- * opensource.org/licenses/BSD-3-Clause
- *
- ******************************************************************************
- */
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __GPIO_H__
-#define __GPIO_H__
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/* Includes ------------------------------------------------------------------*/
-#include "main.h"
-
-/* USER CODE BEGIN Includes */
-
-/* USER CODE END Includes */
-
-/* USER CODE BEGIN Private defines */
-
-/* USER CODE END Private defines */
-
-void MX_GPIO_Init(void);
-
-/* USER CODE BEGIN Prototypes */
-
-/* USER CODE END Prototypes */
-
-#ifdef __cplusplus
-}
-#endif
-#endif /*__ GPIO_H__ */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Core/Inc/lcd_1602.h b/Core/Inc/lcd_1602.h
deleted file mode 100644
index 5df49f3..0000000
--- a/Core/Inc/lcd_1602.h
+++ /dev/null
@@ -1,28 +0,0 @@
-#ifndef __LCD_1602_H
-#define __LCD_1602_H
-#include "stm32l053xx.h"
-#include "main.h"
-
-#define rs(x) x?HAL_GPIO_WritePin(RS_GPIO_Port,RS_Pin,GPIO_PIN_SET):HAL_GPIO_WritePin(RS_GPIO_Port,RS_Pin,GPIO_PIN_RESET)
-#define rw(x) x?HAL_GPIO_WritePin(RW_GPIO_Port,RW_Pin,GPIO_PIN_SET):HAL_GPIO_WritePin(RW_GPIO_Port,RW_Pin,GPIO_PIN_RESET)
-#define en(x) x?HAL_GPIO_WritePin(E_GPIO_Port,E_Pin,GPIO_PIN_SET):HAL_GPIO_WritePin(E_GPIO_Port,E_Pin,GPIO_PIN_RESET)
-
-#define d4(x) x?HAL_GPIO_WritePin(D4_GPIO_Port,D4_Pin,GPIO_PIN_SET):HAL_GPIO_WritePin(D4_GPIO_Port,D4_Pin,GPIO_PIN_RESET)
-#define d5(x) x?HAL_GPIO_WritePin(D5_GPIO_Port,D5_Pin,GPIO_PIN_SET):HAL_GPIO_WritePin(D5_GPIO_Port,D5_Pin,GPIO_PIN_RESET)
-#define d6(x) x?HAL_GPIO_WritePin(D6_GPIO_Port,D6_Pin,GPIO_PIN_SET):HAL_GPIO_WritePin(D6_GPIO_Port,D6_Pin,GPIO_PIN_RESET)
-#define d7(x) x?HAL_GPIO_WritePin(D7_GPIO_Port,D7_Pin,GPIO_PIN_SET):HAL_GPIO_WritePin(D7_GPIO_Port,D7_Pin,GPIO_PIN_RESET)
-
-//#define bl(x) x?HAL_GPIO_WritePin(BL_GPIO_Port,BL_Pin,GPIO_PIN_SET):HAL_GPIO_WritePin(BL_GPIO_Port,BL_Pin,GPIO_PIN_RESET)
-
-static void lcd_send_4bit(uint8_t data);
-static void lcd_send(int8_t rs,uint8_t data);
-void lcd_cmd(uint8_t command);
-void lcd_data(char c);
-void lcd_init(void);
-void lcd_clr(void);
-void lcd_test(void);
-void lcd_displayOff(void);
-void lcd_gotoxy(char x, char y);
-void lcd_puts(char *text);
-
-#endif
diff --git a/Core/Inc/led.h b/Core/Inc/led.h
deleted file mode 100644
index 50c9084..0000000
--- a/Core/Inc/led.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- * led.h
- *
- * Created on: 2 déc. 2020
- * Author: root
- */
-
-#ifndef INC_LED_H_
-#define INC_LED_H_
-
-#include "stm32l053xx.h"
-typedef struct
-{
-GPIO_TypeDef * gpioPort;
-uint16_t pin;
-}LED_TypeDef;
-
-#endif /* INC_LED_H_ */
diff --git a/Core/Inc/main.h b/Core/Inc/main.h
deleted file mode 100644
index 11c7476..0000000
--- a/Core/Inc/main.h
+++ /dev/null
@@ -1,97 +0,0 @@
-/* USER CODE BEGIN Header */
-/**
- ******************************************************************************
- * @file : main.h
- * @brief : Header for main.c file.
- * This file contains the common defines of the application.
- ******************************************************************************
- * @attention
- *
- * <h2><center>&copy; Copyright (c) 2021 STMicroelectronics.
- * All rights reserved.</center></h2>
- *
- * This software component is licensed by ST under BSD 3-Clause license,
- * the "License"; You may not use this file except in compliance with the
- * License. You may obtain a copy of the License at:
- * opensource.org/licenses/BSD-3-Clause
- *
- ******************************************************************************
- */
-/* USER CODE END Header */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __MAIN_H
-#define __MAIN_H
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32l0xx_hal.h"
-
-/* Private includes ----------------------------------------------------------*/
-/* USER CODE BEGIN Includes */
-
-/* USER CODE END Includes */
-
-/* Exported types ------------------------------------------------------------*/
-/* USER CODE BEGIN ET */
-
-/* USER CODE END ET */
-
-/* Exported constants --------------------------------------------------------*/
-/* USER CODE BEGIN EC */
-
-/* USER CODE END EC */
-
-/* Exported macro ------------------------------------------------------------*/
-/* USER CODE BEGIN EM */
-
-/* USER CODE END EM */
-
-/* Exported functions prototypes ---------------------------------------------*/
-void Error_Handler(void);
-
-/* USER CODE BEGIN EFP */
-
-/* USER CODE END EFP */
-
-/* Private defines -----------------------------------------------------------*/
-#define B1_Pin GPIO_PIN_13
-#define B1_GPIO_Port GPIOC
-#define USART_TX_Pin GPIO_PIN_2
-#define USART_TX_GPIO_Port GPIOA
-#define USART_RX_Pin GPIO_PIN_3
-#define USART_RX_GPIO_Port GPIOA
-#define LD2_Pin GPIO_PIN_5
-#define LD2_GPIO_Port GPIOA
-#define RS_Pin GPIO_PIN_0
-#define RS_GPIO_Port GPIOB
-#define RW_Pin GPIO_PIN_1
-#define RW_GPIO_Port GPIOB
-#define E_Pin GPIO_PIN_2
-#define E_GPIO_Port GPIOB
-#define TMS_Pin GPIO_PIN_13
-#define TMS_GPIO_Port GPIOA
-#define TCK_Pin GPIO_PIN_14
-#define TCK_GPIO_Port GPIOA
-#define D4_Pin GPIO_PIN_4
-#define D4_GPIO_Port GPIOB
-#define D5_Pin GPIO_PIN_5
-#define D5_GPIO_Port GPIOB
-#define D6_Pin GPIO_PIN_6
-#define D6_GPIO_Port GPIOB
-#define D7_Pin GPIO_PIN_7
-#define D7_GPIO_Port GPIOB
-/* USER CODE BEGIN Private defines */
-
-/* USER CODE END Private defines */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __MAIN_H */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Core/Inc/stm32l0xx_hal_conf.h b/Core/Inc/stm32l0xx_hal_conf.h
deleted file mode 100644
index 5252f0f..0000000
--- a/Core/Inc/stm32l0xx_hal_conf.h
+++ /dev/null
@@ -1,330 +0,0 @@
-/**
- ******************************************************************************
- * @file stm32l0xx_hal_conf.h
- * @author MCD Application Team
- * @brief HAL configuration template file.
- * This file should be copied to the application folder and renamed
- * to stm32l0xx_hal_conf.h.
- ******************************************************************************
- * @attention
- *
- * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
- * All rights reserved.</center></h2>
- *
- * This software component is licensed by ST under BSD 3-Clause license,
- * the "License"; You may not use this file except in compliance with the
- * License. You may obtain a copy of the License at:
- * opensource.org/licenses/BSD-3-Clause
- *
- ******************************************************************************
- */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32L0xx_HAL_CONF_H
-#define __STM32L0xx_HAL_CONF_H
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-/* Exported types ------------------------------------------------------------*/
-/* Exported constants --------------------------------------------------------*/
-
-/* ########################## Module Selection ############################## */
-/**
- * @brief This is the list of modules to be used in the HAL driver
- */
-
-#define HAL_MODULE_ENABLED
- /*#define HAL_ADC_MODULE_ENABLED */
-/*#define HAL_CRYP_MODULE_ENABLED */
-/*#define HAL_COMP_MODULE_ENABLED */
-/*#define HAL_CRC_MODULE_ENABLED */
-/*#define HAL_CRYP_MODULE_ENABLED */
-/*#define HAL_DAC_MODULE_ENABLED */
-/*#define HAL_FIREWALL_MODULE_ENABLED */
-/*#define HAL_I2S_MODULE_ENABLED */
-/*#define HAL_IWDG_MODULE_ENABLED */
-/*#define HAL_LCD_MODULE_ENABLED */
-/*#define HAL_LPTIM_MODULE_ENABLED */
-/*#define HAL_RNG_MODULE_ENABLED */
-/*#define HAL_RTC_MODULE_ENABLED */
-/*#define HAL_SPI_MODULE_ENABLED */
-/*#define HAL_TIM_MODULE_ENABLED */
-/*#define HAL_TSC_MODULE_ENABLED */
-#define HAL_UART_MODULE_ENABLED
-/*#define HAL_USART_MODULE_ENABLED */
-/*#define HAL_IRDA_MODULE_ENABLED */
-/*#define HAL_SMARTCARD_MODULE_ENABLED */
-/*#define HAL_SMBUS_MODULE_ENABLED */
-/*#define HAL_WWDG_MODULE_ENABLED */
-/*#define HAL_PCD_MODULE_ENABLED */
-#define HAL_GPIO_MODULE_ENABLED
-#define HAL_EXTI_MODULE_ENABLED
-#define HAL_DMA_MODULE_ENABLED
-#define HAL_I2C_MODULE_ENABLED
-#define HAL_RCC_MODULE_ENABLED
-#define HAL_FLASH_MODULE_ENABLED
-#define HAL_PWR_MODULE_ENABLED
-#define HAL_CORTEX_MODULE_ENABLED
-
-/* ########################## Oscillator Values adaptation ####################*/
-/**
- * @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
- * This value is used by the RCC HAL module to compute the system frequency
- * (when HSE is used as system clock source, directly or through the PLL).
- */
-#if !defined (HSE_VALUE)
- #define HSE_VALUE ((uint32_t)8000000U) /*!< Value of the External oscillator in Hz */
-#endif /* HSE_VALUE */
-
-#if !defined (HSE_STARTUP_TIMEOUT)
- #define HSE_STARTUP_TIMEOUT ((uint32_t)100U) /*!< Time out for HSE start up, in ms */
-#endif /* HSE_STARTUP_TIMEOUT */
-
-/**
- * @brief Internal Multiple Speed oscillator (MSI) default value.
- * This value is the default MSI range value after Reset.
- */
-#if !defined (MSI_VALUE)
- #define MSI_VALUE ((uint32_t)2097000U) /*!< Value of the Internal oscillator in Hz*/
-#endif /* MSI_VALUE */
-
-/**
- * @brief Internal High Speed oscillator (HSI) value.
- * This value is used by the RCC HAL module to compute the system frequency
- * (when HSI is used as system clock source, directly or through the PLL).
- */
-#if !defined (HSI_VALUE)
- #define HSI_VALUE ((uint32_t)16000000U) /*!< Value of the Internal oscillator in Hz*/
-#endif /* HSI_VALUE */
-
-/**
- * @brief Internal High Speed oscillator for USB (HSI48) value.
- */
-#if !defined (HSI48_VALUE)
-#define HSI48_VALUE ((uint32_t)48000000U) /*!< Value of the Internal High Speed oscillator for USB in Hz.
- The real value may vary depending on the variations
- in voltage and temperature. */
-#endif /* HSI48_VALUE */
-
-/**
- * @brief Internal Low Speed oscillator (LSI) value.
- */
-#if !defined (LSI_VALUE)
- #define LSI_VALUE ((uint32_t)37000U) /*!< LSI Typical Value in Hz*/
-#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz
- The real value may vary depending on the variations
- in voltage and temperature.*/
-/**
- * @brief External Low Speed oscillator (LSE) value.
- * This value is used by the UART, RTC HAL module to compute the system frequency
- */
-#if !defined (LSE_VALUE)
- #define LSE_VALUE ((uint32_t)32768U) /*!< Value of the External oscillator in Hz*/
-#endif /* LSE_VALUE */
-
-#if !defined (LSE_STARTUP_TIMEOUT)
- #define LSE_STARTUP_TIMEOUT ((uint32_t)5000U) /*!< Time out for LSE start up, in ms */
-#endif /* LSE_STARTUP_TIMEOUT */
-
-/* Tip: To avoid modifying this file each time you need to use different HSE,
- === you can define the HSE value in your toolchain compiler preprocessor. */
-
-/* ########################### System Configuration ######################### */
-/**
- * @brief This is the HAL system configuration section
- */
-#define VDD_VALUE ((uint32_t)3300U) /*!< Value of VDD in mv */
-#define TICK_INT_PRIORITY ((uint32_t)0U) /*!< tick interrupt priority */
-#define USE_RTOS 0U
-#define PREFETCH_ENABLE 0U
-#define PREREAD_ENABLE 1U
-#define BUFFER_CACHE_DISABLE 0U
-
-/* ########################## Assert Selection ############################## */
-/**
- * @brief Uncomment the line below to expanse the "assert_param" macro in the
- * HAL drivers code
- */
-/* #define USE_FULL_ASSERT 1U */
-
-/* ################## Register callback feature configuration ############### */
-/**
- * @brief Set below the peripheral configuration to "1U" to add the support
- * of HAL callback registration/deregistration feature for the HAL
- * driver(s). This allows user application to provide specific callback
- * functions thanks to HAL_PPP_RegisterCallback() rather than overwriting
- * the default weak callback functions (see each stm32l0xx_hal_ppp.h file
- * for possible callback identifiers defined in HAL_PPP_CallbackIDTypeDef
- * for each PPP peripheral).
- */
-#define USE_HAL_ADC_REGISTER_CALLBACKS 0U
-#define USE_HAL_COMP_REGISTER_CALLBACKS 0U
-#define USE_HAL_DAC_REGISTER_CALLBACKS 0U
-#define USE_HAL_I2C_REGISTER_CALLBACKS 0U
-#define USE_HAL_I2S_REGISTER_CALLBACKS 0U
-#define USE_HAL_IRDA_REGISTER_CALLBACKS 0U
-#define USE_HAL_LPTIM_REGISTER_CALLBACKS 0U
-#define USE_HAL_PCD_REGISTER_CALLBACKS 0U
-#define USE_HAL_RNG_REGISTER_CALLBACKS 0U
-#define USE_HAL_RTC_REGISTER_CALLBACKS 0U
-#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0U
-#define USE_HAL_SMBUS_REGISTER_CALLBACKS 0U
-#define USE_HAL_SPI_REGISTER_CALLBACKS 0U
-#define USE_HAL_TIM_REGISTER_CALLBACKS 0U
-#define USE_HAL_TSC_REGISTER_CALLBACKS 0U
-#define USE_HAL_UART_REGISTER_CALLBACKS 0U
-#define USE_HAL_USART_REGISTER_CALLBACKS 0U
-#define USE_HAL_WWDG_REGISTER_CALLBACKS 0U
-
-/* Includes ------------------------------------------------------------------*/
-/**
- * @brief Include module's header file
- */
-
-#ifdef HAL_RCC_MODULE_ENABLED
- #include "stm32l0xx_hal_rcc.h"
-#endif /* HAL_RCC_MODULE_ENABLED */
-
-#ifdef HAL_EXTI_MODULE_ENABLED
- #include "stm32l0xx_hal_exti.h"
-#endif /* HAL_EXTI_MODULE_ENABLED */
-
-#ifdef HAL_GPIO_MODULE_ENABLED
- #include "stm32l0xx_hal_gpio.h"
-#endif /* HAL_GPIO_MODULE_ENABLED */
-
-#ifdef HAL_DMA_MODULE_ENABLED
- #include "stm32l0xx_hal_dma.h"
-#endif /* HAL_DMA_MODULE_ENABLED */
-
-#ifdef HAL_CORTEX_MODULE_ENABLED
- #include "stm32l0xx_hal_cortex.h"
-#endif /* HAL_CORTEX_MODULE_ENABLED */
-
-#ifdef HAL_ADC_MODULE_ENABLED
- #include "stm32l0xx_hal_adc.h"
-#endif /* HAL_ADC_MODULE_ENABLED */
-
-#ifdef HAL_COMP_MODULE_ENABLED
- #include "stm32l0xx_hal_comp.h"
-#endif /* HAL_COMP_MODULE_ENABLED */
-
-#ifdef HAL_CRC_MODULE_ENABLED
- #include "stm32l0xx_hal_crc.h"
-#endif /* HAL_CRC_MODULE_ENABLED */
-
-#ifdef HAL_CRYP_MODULE_ENABLED
- #include "stm32l0xx_hal_cryp.h"
-#endif /* HAL_CRYP_MODULE_ENABLED */
-
-#ifdef HAL_DAC_MODULE_ENABLED
- #include "stm32l0xx_hal_dac.h"
-#endif /* HAL_DAC_MODULE_ENABLED */
-
-#ifdef HAL_FIREWALL_MODULE_ENABLED
- #include "stm32l0xx_hal_firewall.h"
-#endif /* HAL_FIREWALL_MODULE_ENABLED */
-
-#ifdef HAL_FLASH_MODULE_ENABLED
- #include "stm32l0xx_hal_flash.h"
-#endif /* HAL_FLASH_MODULE_ENABLED */
-
-#ifdef HAL_I2C_MODULE_ENABLED
- #include "stm32l0xx_hal_i2c.h"
-#endif /* HAL_I2C_MODULE_ENABLED */
-
-#ifdef HAL_I2S_MODULE_ENABLED
- #include "stm32l0xx_hal_i2s.h"
-#endif /* HAL_I2S_MODULE_ENABLED */
-
-#ifdef HAL_IWDG_MODULE_ENABLED
- #include "stm32l0xx_hal_iwdg.h"
-#endif /* HAL_IWDG_MODULE_ENABLED */
-
-#ifdef HAL_LCD_MODULE_ENABLED
- #include "stm32l0xx_hal_lcd.h"
-#endif /* HAL_LCD_MODULE_ENABLED */
-
-#ifdef HAL_LPTIM_MODULE_ENABLED
-#include "stm32l0xx_hal_lptim.h"
-#endif /* HAL_LPTIM_MODULE_ENABLED */
-
-#ifdef HAL_PWR_MODULE_ENABLED
- #include "stm32l0xx_hal_pwr.h"
-#endif /* HAL_PWR_MODULE_ENABLED */
-
-#ifdef HAL_RNG_MODULE_ENABLED
- #include "stm32l0xx_hal_rng.h"
-#endif /* HAL_RNG_MODULE_ENABLED */
-
-#ifdef HAL_RTC_MODULE_ENABLED
- #include "stm32l0xx_hal_rtc.h"
-
-#endif /* HAL_RTC_MODULE_ENABLED */
-
-#ifdef HAL_SPI_MODULE_ENABLED
- #include "stm32l0xx_hal_spi.h"
-#endif /* HAL_SPI_MODULE_ENABLED */
-
-#ifdef HAL_TIM_MODULE_ENABLED
- #include "stm32l0xx_hal_tim.h"
-#endif /* HAL_TIM_MODULE_ENABLED */
-
-#ifdef HAL_TSC_MODULE_ENABLED
- #include "stm32l0xx_hal_tsc.h"
-#endif /* HAL_TSC_MODULE_ENABLED */
-
-#ifdef HAL_UART_MODULE_ENABLED
- #include "stm32l0xx_hal_uart.h"
-#endif /* HAL_UART_MODULE_ENABLED */
-
-#ifdef HAL_USART_MODULE_ENABLED
- #include "stm32l0xx_hal_usart.h"
-#endif /* HAL_USART_MODULE_ENABLED */
-
-#ifdef HAL_IRDA_MODULE_ENABLED
- #include "stm32l0xx_hal_irda.h"
-#endif /* HAL_IRDA_MODULE_ENABLED */
-
-#ifdef HAL_SMARTCARD_MODULE_ENABLED
- #include "stm32l0xx_hal_smartcard.h"
-#endif /* HAL_SMARTCARD_MODULE_ENABLED */
-
-#ifdef HAL_SMBUS_MODULE_ENABLED
- #include "stm32l0xx_hal_smbus.h"
-#endif /* HAL_SMBUS_MODULE_ENABLED */
-
-#ifdef HAL_WWDG_MODULE_ENABLED
- #include "stm32l0xx_hal_wwdg.h"
-#endif /* HAL_WWDG_MODULE_ENABLED */
-
-#ifdef HAL_PCD_MODULE_ENABLED
- #include "stm32l0xx_hal_pcd.h"
-#endif /* HAL_PCD_MODULE_ENABLED */
-
-/* Exported macro ------------------------------------------------------------*/
-#ifdef USE_FULL_ASSERT
-/**
- * @brief The assert_param macro is used for function's parameters check.
- * @param expr: If expr is false, it calls assert_failed function
- * which reports the name of the source file and the source
- * line number of the call that failed.
- * If expr is true, it returns no value.
- * @retval None
- */
- #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
-/* Exported functions ------------------------------------------------------- */
- void assert_failed(uint8_t* file, uint32_t line);
-#else
- #define assert_param(expr) ((void)0U)
-#endif /* USE_FULL_ASSERT */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __STM32L0xx_HAL_CONF_H */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Core/Inc/stm32l0xx_it.h b/Core/Inc/stm32l0xx_it.h
deleted file mode 100644
index 77cb7bd..0000000
--- a/Core/Inc/stm32l0xx_it.h
+++ /dev/null
@@ -1,65 +0,0 @@
-/* USER CODE BEGIN Header */
-/**
- ******************************************************************************
- * @file stm32l0xx_it.h
- * @brief This file contains the headers of the interrupt handlers.
- ******************************************************************************
- * @attention
- *
- * <h2><center>&copy; Copyright (c) 2021 STMicroelectronics.
- * All rights reserved.</center></h2>
- *
- * This software component is licensed by ST under BSD 3-Clause license,
- * the "License"; You may not use this file except in compliance with the
- * License. You may obtain a copy of the License at:
- * opensource.org/licenses/BSD-3-Clause
- *
- ******************************************************************************
- */
-/* USER CODE END Header */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32L0xx_IT_H
-#define __STM32L0xx_IT_H
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-/* Private includes ----------------------------------------------------------*/
-/* USER CODE BEGIN Includes */
-
-/* USER CODE END Includes */
-
-/* Exported types ------------------------------------------------------------*/
-/* USER CODE BEGIN ET */
-
-/* USER CODE END ET */
-
-/* Exported constants --------------------------------------------------------*/
-/* USER CODE BEGIN EC */
-
-/* USER CODE END EC */
-
-/* Exported macro ------------------------------------------------------------*/
-/* USER CODE BEGIN EM */
-
-/* USER CODE END EM */
-
-/* Exported functions prototypes ---------------------------------------------*/
-void NMI_Handler(void);
-void HardFault_Handler(void);
-void SVC_Handler(void);
-void PendSV_Handler(void);
-void SysTick_Handler(void);
-/* USER CODE BEGIN EFP */
-
-/* USER CODE END EFP */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __STM32L0xx_IT_H */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Core/Inc/usart.h b/Core/Inc/usart.h
deleted file mode 100644
index 953af0e..0000000
--- a/Core/Inc/usart.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/**
- ******************************************************************************
- * @file usart.h
- * @brief This file contains all the function prototypes for
- * the usart.c file
- ******************************************************************************
- * @attention
- *
- * <h2><center>&copy; Copyright (c) 2021 STMicroelectronics.
- * All rights reserved.</center></h2>
- *
- * This software component is licensed by ST under BSD 3-Clause license,
- * the "License"; You may not use this file except in compliance with the
- * License. You may obtain a copy of the License at:
- * opensource.org/licenses/BSD-3-Clause
- *
- ******************************************************************************
- */
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __USART_H__
-#define __USART_H__
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/* Includes ------------------------------------------------------------------*/
-#include "main.h"
-
-/* USER CODE BEGIN Includes */
-
-/* USER CODE END Includes */
-
-extern UART_HandleTypeDef huart2;
-
-/* USER CODE BEGIN Private defines */
-
-/* USER CODE END Private defines */
-
-void MX_USART2_UART_Init(void);
-
-/* USER CODE BEGIN Prototypes */
-
-/* USER CODE END Prototypes */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __USART_H__ */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-08 21:21:03 +0000