diff options
| author | Clyhtsuriva <aimeric@adjutor.xyz> | 2021-01-26 18:26:26 +0100 |
|---|---|---|
| committer | Clyhtsuriva <aimeric@adjutor.xyz> | 2021-01-26 18:26:26 +0100 |
| commit | bc481107298791bf0efd984ecc53dc92b8719878 (patch) | |
| tree | 332af7837f310af85b261611ed016e0e6312262c /simonnnnn/Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_hal_flash_ramfunc.c | |
| parent | 816804c9c114e20d2231258cc346c3714590b9ea (diff) | |
Insertion du projet dans sa totalité
Diffstat (limited to 'simonnnnn/Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_hal_flash_ramfunc.c')
| -rw-r--r-- | simonnnnn/Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_hal_flash_ramfunc.c | 521 |
1 files changed, 521 insertions, 0 deletions
diff --git a/simonnnnn/Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_hal_flash_ramfunc.c b/simonnnnn/Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_hal_flash_ramfunc.c new file mode 100644 index 0000000..dd58988 --- /dev/null +++ b/simonnnnn/Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_hal_flash_ramfunc.c @@ -0,0 +1,521 @@ +/**
+ ******************************************************************************
+ * @file stm32l0xx_hal_flash_ramfunc.c
+ * @author MCD Application Team
+ * @brief FLASH RAMFUNC driver.
+ * This file provides a Flash firmware functions which should be
+ * executed from internal SRAM
+ *
+ * @verbatim
+
+ *** ARM Compiler ***
+ --------------------
+ [..] RAM functions are defined using the toolchain options.
+ Functions that are be executed in RAM should reside in a separate
+ source module. Using the 'Options for File' dialog you can simply change
+ the 'Code / Const' area of a module to a memory space in physical RAM.
+ Available memory areas are declared in the 'Target' tab of the
+ Options for Target' dialog.
+
+ *** ICCARM Compiler ***
+ -----------------------
+ [..] RAM functions are defined using a specific toolchain keyword "__ramfunc".
+
+ *** GNU Compiler ***
+ --------------------
+ [..] RAM functions are defined using a specific toolchain attribute
+ "__attribute__((section(".RamFunc")))".
+
+@endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© Copyright (c) 2016 STMicroelectronics.
+ * All rights reserved.</center></h2>
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32l0xx_hal.h"
+
+/** @addtogroup STM32L0xx_HAL_Driver
+ * @{
+ */
+
+#ifdef HAL_FLASH_MODULE_ENABLED
+
+/** @addtogroup FLASH
+ * @{
+ */
+/** @addtogroup FLASH_Private_Variables
+ * @{
+ */
+extern FLASH_ProcessTypeDef pFlash;
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_RAMFUNC FLASH_RAMFUNC
+ * @brief FLASH functions executed from RAM
+ * @{
+ */
+
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/** @defgroup FLASH_RAMFUNC_Private_Functions FLASH RAM Private Functions
+ * @{
+ */
+
+static __RAM_FUNC HAL_StatusTypeDef FLASHRAM_WaitForLastOperation(uint32_t Timeout);
+static __RAM_FUNC HAL_StatusTypeDef FLASHRAM_SetErrorCode(void);
+
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+
+/** @defgroup FLASH_RAMFUNC_Exported_Functions FLASH RAM Exported Functions
+ *
+@verbatim
+ ===============================================================================
+ ##### ramfunc functions #####
+ ===============================================================================
+ [..]
+ This subsection provides a set of functions that should be executed from RAM
+ transfers.
+
+@endverbatim
+ * @{
+ */
+
+/** @defgroup FLASH_RAMFUNC_Exported_Functions_Group1 Peripheral features functions
+ * @{
+ */
+
+/**
+ * @brief Enable the power down mode during RUN mode.
+ * @note This function can be used only when the user code is running from Internal SRAM.
+ * @retval HAL status
+ */
+__RAM_FUNC HAL_StatusTypeDef HAL_FLASHEx_EnableRunPowerDown(void)
+{
+ /* Enable the Power Down in Run mode*/
+ __HAL_FLASH_POWER_DOWN_ENABLE();
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Disable the power down mode during RUN mode.
+ * @note This function can be used only when the user code is running from Internal SRAM.
+ * @retval HAL status
+ */
+__RAM_FUNC HAL_StatusTypeDef HAL_FLASHEx_DisableRunPowerDown(void)
+{
+ /* Disable the Power Down in Run mode*/
+ __HAL_FLASH_POWER_DOWN_DISABLE();
+
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_RAMFUNC_Exported_Functions_Group2 Programming and erasing operation functions
+ *
+@verbatim
+@endverbatim
+ * @{
+ */
+
+#if defined(FLASH_PECR_PARALLBANK)
+/**
+ * @brief Erases a specified 2 pages in program memory in parallel.
+ * @note This function can be used only for STM32L07xxx/STM32L08xxx devices.
+ * To correctly run this function, the @ref HAL_FLASH_Unlock() function
+ * must be called before.
+ * Call the @ref HAL_FLASH_Lock() to disable the flash memory access
+ * (recommended to protect the FLASH memory against possible unwanted operation).
+ * @param Page_Address1: The page address in program memory to be erased in
+ * the first Bank (BANK1). This parameter should be between FLASH_BASE
+ * and FLASH_BANK1_END.
+ * @param Page_Address2: The page address in program memory to be erased in
+ * the second Bank (BANK2). This parameter should be between FLASH_BANK2_BASE
+ * and FLASH_BANK2_END.
+ * @note A Page is erased in the Program memory only if the address to load
+ * is the start address of a page (multiple of @ref FLASH_PAGE_SIZE bytes).
+ * @retval HAL status
+ */
+__RAM_FUNC HAL_StatusTypeDef HAL_FLASHEx_EraseParallelPage(uint32_t Page_Address1, uint32_t Page_Address2)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Wait for last operation to be completed */
+ status = FLASHRAM_WaitForLastOperation(FLASH_TIMEOUT_VALUE);
+
+ if(status == HAL_OK)
+ {
+ /* Proceed to erase the page */
+ SET_BIT(FLASH->PECR, FLASH_PECR_PARALLBANK);
+ SET_BIT(FLASH->PECR, FLASH_PECR_ERASE);
+ SET_BIT(FLASH->PECR, FLASH_PECR_PROG);
+
+ /* Write 00000000h to the first word of the first program page to erase */
+ *(__IO uint32_t *)Page_Address1 = 0x00000000U;
+ /* Write 00000000h to the first word of the second program page to erase */
+ *(__IO uint32_t *)Page_Address2 = 0x00000000U;
+
+ /* Wait for last operation to be completed */
+ status = FLASHRAM_WaitForLastOperation(FLASH_TIMEOUT_VALUE);
+
+ /* If the erase operation is completed, disable the ERASE, PROG and PARALLBANK bits */
+ CLEAR_BIT(FLASH->PECR, FLASH_PECR_PROG);
+ CLEAR_BIT(FLASH->PECR, FLASH_PECR_ERASE);
+ CLEAR_BIT(FLASH->PECR, FLASH_PECR_PARALLBANK);
+ }
+ /* Return the Erase Status */
+ return status;
+}
+
+/**
+ * @brief Program 2 half pages in program memory in parallel (half page size is 16 Words).
+ * @note This function can be used only for STM32L07xxx/STM32L08xxx devices.
+ * @param Address1: specifies the first address to be written in the first bank
+ * (BANK1). This parameter should be between FLASH_BASE and (FLASH_BANK1_END - FLASH_PAGE_SIZE).
+ * @param pBuffer1: pointer to the buffer containing the data to be written
+ * to the first half page in the first bank.
+ * @param Address2: specifies the second address to be written in the second bank
+ * (BANK2). This parameter should be between FLASH_BANK2_BASE and (FLASH_BANK2_END - FLASH_PAGE_SIZE).
+ * @param pBuffer2: pointer to the buffer containing the data to be written
+ * to the second half page in the second bank.
+ * @note To correctly run this function, the @ref HAL_FLASH_Unlock() function
+ * must be called before.
+ * Call the @ref HAL_FLASH_Lock() to disable the flash memory access
+ * (recommended to protect the FLASH memory against possible unwanted operation).
+ * @note Half page write is possible only from SRAM.
+ * @note A half page is written to the program memory only if the first
+ * address to load is the start address of a half page (multiple of 64
+ * bytes) and the 15 remaining words to load are in the same half page.
+ * @note During the Program memory half page write all read operations are
+ * forbidden (this includes DMA read operations and debugger read
+ * operations such as breakpoints, periodic updates, etc.).
+ * @note If a PGAERR is set during a Program memory half page write, the
+ * complete write operation is aborted. Software should then reset the
+ * FPRG and PROG/DATA bits and restart the write operation from the
+ * beginning.
+ * @retval HAL status
+ */
+__RAM_FUNC HAL_StatusTypeDef HAL_FLASHEx_ProgramParallelHalfPage(uint32_t Address1, uint32_t* pBuffer1, uint32_t Address2, uint32_t* pBuffer2)
+{
+ uint32_t count = 0U;
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Wait for last operation to be completed */
+ status = FLASHRAM_WaitForLastOperation(FLASH_TIMEOUT_VALUE);
+
+ if(status == HAL_OK)
+ {
+ /* Proceed to program the new half page */
+ SET_BIT(FLASH->PECR, FLASH_PECR_PARALLBANK);
+ SET_BIT(FLASH->PECR, FLASH_PECR_FPRG);
+ SET_BIT(FLASH->PECR, FLASH_PECR_PROG);
+
+ /* Wait for last operation to be completed */
+ status = FLASHRAM_WaitForLastOperation(FLASH_TIMEOUT_VALUE);
+ if(status == HAL_OK)
+ {
+ /* Disable all IRQs */
+ __disable_irq();
+
+ /* Write the first half page directly with 16 different words */
+ while(count < 16U)
+ {
+ /* Address1 doesn't need to be increased */
+ *(__IO uint32_t*) Address1 = *pBuffer1;
+ pBuffer1++;
+ count ++;
+ }
+
+ /* Write the second half page directly with 16 different words */
+ count = 0U;
+ while(count < 16U)
+ {
+ /* Address2 doesn't need to be increased */
+ *(__IO uint32_t*) Address2 = *pBuffer2;
+ pBuffer2++;
+ count ++;
+ }
+
+ /* Enable IRQs */
+ __enable_irq();
+
+ /* Wait for last operation to be completed */
+ status = FLASHRAM_WaitForLastOperation(FLASH_TIMEOUT_VALUE);
+ }
+
+ /* if the write operation is completed, disable the PROG, FPRG and PARALLBANK bits */
+ CLEAR_BIT(FLASH->PECR, FLASH_PECR_PROG);
+ CLEAR_BIT(FLASH->PECR, FLASH_PECR_FPRG);
+ CLEAR_BIT(FLASH->PECR, FLASH_PECR_PARALLBANK);
+ }
+
+ /* Return the Write Status */
+ return status;
+}
+#endif /* FLASH_PECR_PARALLBANK */
+
+/**
+ * @brief Program a half page in program memory.
+ * @param Address specifies the address to be written.
+ * @param pBuffer pointer to the buffer containing the data to be written to
+ * the half page.
+ * @note To correctly run this function, the @ref HAL_FLASH_Unlock() function
+ * must be called before.
+ * Call the @ref HAL_FLASH_Lock() to disable the flash memory access
+ * (recommended to protect the FLASH memory against possible unwanted operation)
+ * @note Half page write is possible only from SRAM.
+ * @note A half page is written to the program memory only if the first
+ * address to load is the start address of a half page (multiple of 64
+ * bytes) and the 15 remaining words to load are in the same half page.
+ * @note During the Program memory half page write all read operations are
+ * forbidden (this includes DMA read operations and debugger read
+ * operations such as breakpoints, periodic updates, etc.).
+ * @note If a PGAERR is set during a Program memory half page write, the
+ * complete write operation is aborted. Software should then reset the
+ * FPRG and PROG/DATA bits and restart the write operation from the
+ * beginning.
+ * @retval HAL status
+ */
+__RAM_FUNC HAL_StatusTypeDef HAL_FLASHEx_HalfPageProgram(uint32_t Address, uint32_t* pBuffer)
+{
+ uint32_t count = 0U;
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Wait for last operation to be completed */
+ status = FLASHRAM_WaitForLastOperation(FLASH_TIMEOUT_VALUE);
+
+ if(status == HAL_OK)
+ {
+ /* Proceed to program the new half page */
+ SET_BIT(FLASH->PECR, FLASH_PECR_FPRG);
+ SET_BIT(FLASH->PECR, FLASH_PECR_PROG);
+
+ /* Disable all IRQs */
+ __disable_irq();
+
+ /* Write one half page directly with 16 different words */
+ while(count < 16U)
+ {
+ /* Address doesn't need to be increased */
+ *(__IO uint32_t*) Address = *pBuffer;
+ pBuffer++;
+ count ++;
+ }
+
+ /* Enable IRQs */
+ __enable_irq();
+
+ /* Wait for last operation to be completed */
+ status = FLASHRAM_WaitForLastOperation(FLASH_TIMEOUT_VALUE);
+
+ /* If the write operation is completed, disable the PROG and FPRG bits */
+ CLEAR_BIT(FLASH->PECR, FLASH_PECR_PROG);
+ CLEAR_BIT(FLASH->PECR, FLASH_PECR_FPRG);
+ }
+
+ /* Return the Write Status */
+ return status;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_RAMFUNC_Exported_Functions_Group3 Peripheral errors functions
+ * @brief Peripheral errors functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Peripheral errors functions #####
+ ===============================================================================
+ [..]
+ This subsection permit to get in run-time errors of the FLASH peripheral.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Get the specific FLASH errors flag.
+ * @param Error pointer is the error value. It can be a mixed of:
+ * @arg @ref HAL_FLASH_ERROR_RD FLASH Read Protection error flag (PCROP)
+ * @arg @ref HAL_FLASH_ERROR_SIZE FLASH Programming Parallelism error flag
+ * @arg @ref HAL_FLASH_ERROR_PGA FLASH Programming Alignment error flag
+ * @arg @ref HAL_FLASH_ERROR_WRP FLASH Write protected error flag
+ * @arg @ref HAL_FLASH_ERROR_OPTV FLASH Option valid error flag
+ * @arg @ref HAL_FLASH_ERROR_FWWERR FLASH Write or Erase operation aborted
+ * @arg @ref HAL_FLASH_ERROR_NOTZERO FLASH Write operation is done in a not-erased region
+ * @retval HAL Status
+ */
+__RAM_FUNC HAL_StatusTypeDef HAL_FLASHEx_GetError(uint32_t * Error)
+{
+ *Error = pFlash.ErrorCode;
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup FLASH_RAMFUNC_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief Set the specific FLASH error flag.
+ * @retval HAL Status
+ */
+static __RAM_FUNC HAL_StatusTypeDef FLASHRAM_SetErrorCode(void)
+{
+ uint32_t flags = 0;
+
+ if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_WRPERR))
+ {
+ pFlash.ErrorCode |= HAL_FLASH_ERROR_WRP;
+ flags |= FLASH_FLAG_WRPERR;
+ }
+ if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_PGAERR))
+ {
+ pFlash.ErrorCode |= HAL_FLASH_ERROR_PGA;
+ flags |= FLASH_FLAG_PGAERR;
+ }
+ if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_SIZERR))
+ {
+ pFlash.ErrorCode |= HAL_FLASH_ERROR_SIZE;
+ flags |= FLASH_FLAG_SIZERR;
+ }
+ if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_OPTVERR))
+ {
+ /* WARNING : On the first cut of STM32L031xx and STM32L041xx devices,
+ * (RefID = 0x1000) the FLASH_FLAG_OPTVERR bit was not behaving
+ * as expected. If the user run an application using the first
+ * cut of the STM32L031xx device or the first cut of the STM32L041xx
+ * device, this error should be ignored. The revId of the device
+ * can be retrieved via the HAL_GetREVID() function.
+ *
+ */
+ pFlash.ErrorCode |= HAL_FLASH_ERROR_OPTV;
+ flags |= FLASH_FLAG_OPTVERR;
+ }
+
+ if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_RDERR))
+ {
+ pFlash.ErrorCode |= HAL_FLASH_ERROR_RD;
+ flags |= FLASH_FLAG_RDERR;
+ }
+ if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_FWWERR))
+ {
+ pFlash.ErrorCode |= HAL_FLASH_ERROR_FWWERR;
+ flags |= HAL_FLASH_ERROR_FWWERR;
+ }
+ if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_NOTZEROERR))
+ {
+ pFlash.ErrorCode |= HAL_FLASH_ERROR_NOTZERO;
+ flags |= FLASH_FLAG_NOTZEROERR;
+ }
+
+ /* Clear FLASH error pending bits */
+ __HAL_FLASH_CLEAR_FLAG(flags);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Wait for a FLASH operation to complete.
+ * @param Timeout maximum flash operationtimeout
+ * @retval HAL status
+ */
+static __RAM_FUNC HAL_StatusTypeDef FLASHRAM_WaitForLastOperation(uint32_t Timeout)
+{
+ /* Wait for the FLASH operation to complete by polling on BUSY flag to be reset.
+ Even if the FLASH operation fails, the BUSY flag will be reset and an error
+ flag will be set */
+
+ while(__HAL_FLASH_GET_FLAG(FLASH_FLAG_BSY) && (Timeout != 0x00U))
+ {
+ Timeout--;
+ }
+
+ if(Timeout == 0x00U)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ /* Check FLASH End of Operation flag */
+ if (__HAL_FLASH_GET_FLAG(FLASH_FLAG_EOP))
+ {
+ /* Clear FLASH End of Operation pending bit */
+ __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_EOP);
+ }
+
+ if( __HAL_FLASH_GET_FLAG(FLASH_FLAG_WRPERR) ||
+ __HAL_FLASH_GET_FLAG(FLASH_FLAG_PGAERR) ||
+ __HAL_FLASH_GET_FLAG(FLASH_FLAG_SIZERR) ||
+ __HAL_FLASH_GET_FLAG(FLASH_FLAG_OPTVERR) ||
+ __HAL_FLASH_GET_FLAG(FLASH_FLAG_RDERR) ||
+ __HAL_FLASH_GET_FLAG(FLASH_FLAG_FWWERR) ||
+ __HAL_FLASH_GET_FLAG(FLASH_FLAG_NOTZEROERR) )
+ {
+ /*Save the error code*/
+
+ /* WARNING : On the first cut of STM32L031xx and STM32L041xx devices,
+ * (RefID = 0x1000) the FLASH_FLAG_OPTVERR bit was not behaving
+ * as expected. If the user run an application using the first
+ * cut of the STM32L031xx device or the first cut of the STM32L041xx
+ * device, this error should be ignored. The revId of the device
+ * can be retrieved via the HAL_GetREVID() function.
+ *
+ */
+ FLASHRAM_SetErrorCode();
+ return HAL_ERROR;
+ }
+
+ /* There is no error flag set */
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* HAL_FLASH_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|