diff options
| author | Clyhtsuriva <aimeric@adjutor.xyz> | 2021-01-26 18:26:26 +0100 |
|---|---|---|
| committer | Clyhtsuriva <aimeric@adjutor.xyz> | 2021-01-26 18:26:26 +0100 |
| commit | bc481107298791bf0efd984ecc53dc92b8719878 (patch) | |
| tree | 332af7837f310af85b261611ed016e0e6312262c /simonnnnn/Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_gpio.h | |
| parent | 816804c9c114e20d2231258cc346c3714590b9ea (diff) | |
Insertion du projet dans sa totalité
Diffstat (limited to 'simonnnnn/Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_gpio.h')
| -rw-r--r-- | simonnnnn/Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_gpio.h | 326 |
1 files changed, 326 insertions, 0 deletions
diff --git a/simonnnnn/Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_gpio.h b/simonnnnn/Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_gpio.h new file mode 100644 index 0000000..e4a15ce --- /dev/null +++ b/simonnnnn/Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_gpio.h @@ -0,0 +1,326 @@ +/**
+ ******************************************************************************
+ * @file stm32l0xx_hal_gpio.h
+ * @author MCD Application Team
+ * @brief Header file of GPIO HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© Copyright(c) 2016 STMicroelectronics.
+ * All rights reserved.</center></h2>
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32L0xx_HAL_GPIO_H
+#define __STM32L0xx_HAL_GPIO_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32l0xx_hal_def.h"
+
+/** @addtogroup STM32L0xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup GPIO GPIO
+ * @{
+ */
+/******************************************************************************/
+/* Exported types ------------------------------------------------------------*/
+/******************************************************************************/
+
+/** @defgroup GPIO_Exported_Types GPIO Exported Types
+ * @{
+ */
+
+/** @defgroup GPIO_Init_Configuration GPIO init configuration structure
+ * @{
+ */
+/**
+ * @brief GPIO Init structure definition
+ */
+typedef struct
+{
+ uint32_t Pin; /*!< Specifies the GPIO pins to be configured.
+ This parameter can be a combination of @ref GPIO_pins_define */
+
+ uint32_t Mode; /*!< Specifies the operating mode for the selected pins.
+ This parameter can be a value of @ref GPIO_mode_define */
+
+ uint32_t Pull; /*!< Specifies the Pull-up or Pull-Down activation for the selected pins.
+ This parameter can be a value of @ref GPIO_pull_define */
+
+ uint32_t Speed; /*!< Specifies the speed for the selected pins.
+ This parameter can be a value of @ref GPIO_speed_define */
+
+ uint32_t Alternate; /*!< Peripheral to be connected to the selected pins
+ This parameter can be a value of @ref GPIOEx_Alternate_function_selection */
+} GPIO_InitTypeDef;
+/**
+ * @}
+ */
+
+/** @defgroup GPIO_SetReset_Definition GPIO set reset definition
+ * @{
+ */
+/**
+ * @brief GPIO Bit SET and Bit RESET enumeration
+ */
+typedef enum
+{
+ GPIO_PIN_RESET = 0U,
+ GPIO_PIN_SET
+} GPIO_PinState;
+/**
+ * @}
+ */
+
+
+#define IS_GPIO_PIN_ACTION(__ACTION__) (((__ACTION__) == GPIO_PIN_RESET) || ((__ACTION__) == GPIO_PIN_SET))
+
+/**
+ * @}
+ */
+/******************************************************************************/
+/* Exported constants --------------------------------------------------------*/
+/******************************************************************************/
+
+/** @defgroup GPIO_Exported_Constants GPIO Exported Constants
+ * @{
+ */
+
+/** @defgroup GPIO_pins_define Pin definition
+ * @{
+ */
+#define GPIO_PIN_0 (0x0001U) /* Pin 0 selected */
+#define GPIO_PIN_1 (0x0002U) /* Pin 1 selected */
+#define GPIO_PIN_2 (0x0004U) /* Pin 2 selected */
+#define GPIO_PIN_3 (0x0008U) /* Pin 3 selected */
+#define GPIO_PIN_4 (0x0010U) /* Pin 4 selected */
+#define GPIO_PIN_5 (0x0020U) /* Pin 5 selected */
+#define GPIO_PIN_6 (0x0040U) /* Pin 6 selected */
+#define GPIO_PIN_7 (0x0080U) /* Pin 7 selected */
+#define GPIO_PIN_8 (0x0100U) /* Pin 8 selected */
+#define GPIO_PIN_9 (0x0200U) /* Pin 9 selected */
+#define GPIO_PIN_10 (0x0400U) /* Pin 10 selected */
+#define GPIO_PIN_11 (0x0800U) /* Pin 11 selected */
+#define GPIO_PIN_12 (0x1000U) /* Pin 12 selected */
+#define GPIO_PIN_13 (0x2000U) /* Pin 13 selected */
+#define GPIO_PIN_14 (0x4000U) /* Pin 14 selected */
+#define GPIO_PIN_15 (0x8000U) /* Pin 15 selected */
+#define GPIO_PIN_All (0xFFFFU) /* All pins selected */
+/**
+ * @}
+ */
+
+#define GPIO_PIN_MASK (0x0000FFFFU) /* PIN mask for assert test */
+#define IS_GPIO_PIN(__PIN__) ((((uint32_t)(__PIN__) & GPIO_PIN_MASK) != 0x00U) &&\
+ (((uint32_t)(__PIN__) & ~GPIO_PIN_MASK) == 0x00U))
+
+/** @defgroup GPIO_mode_define Mode definition
+ * @brief GPIO Configuration Mode
+ * Elements values convention: 0xX0yz00YZ
+ * - X : GPIO mode or EXTI Mode
+ * - y : External IT or Event trigger detection
+ * - z : IO configuration on External IT or Event
+ * - Y : Output type (Push Pull or Open Drain)
+ * - Z : IO Direction mode (Input, Output, Alternate or Analog)
+ * @{
+ */
+#define GPIO_MODE_INPUT (0x00000000U) /*!< Input Floating Mode */
+#define GPIO_MODE_OUTPUT_PP (0x00000001U) /*!< Output Push Pull Mode */
+#define GPIO_MODE_OUTPUT_OD (0x00000011U) /*!< Output Open Drain Mode */
+#define GPIO_MODE_AF_PP (0x00000002U) /*!< Alternate Function Push Pull Mode */
+#define GPIO_MODE_AF_OD (0x00000012U) /*!< Alternate Function Open Drain Mode */
+
+#define GPIO_MODE_ANALOG (0x00000003U) /*!< Analog Mode */
+
+#define GPIO_MODE_IT_RISING (0x10110000U) /*!< External Interrupt Mode with Rising edge trigger detection */
+#define GPIO_MODE_IT_FALLING (0x10210000U) /*!< External Interrupt Mode with Falling edge trigger detection */
+#define GPIO_MODE_IT_RISING_FALLING (0x10310000U) /*!< External Interrupt Mode with Rising/Falling edge trigger detection */
+
+#define GPIO_MODE_EVT_RISING (0x10120000U) /*!< External Event Mode with Rising edge trigger detection */
+#define GPIO_MODE_EVT_FALLING (0x10220000U) /*!< External Event Mode with Falling edge trigger detection */
+#define GPIO_MODE_EVT_RISING_FALLING (0x10320000U) /*!< External Event Mode with Rising/Falling edge trigger detection */
+
+/**
+ * @}
+ */
+
+#define IS_GPIO_MODE(__MODE__) (((__MODE__) == GPIO_MODE_INPUT) ||\
+ ((__MODE__) == GPIO_MODE_OUTPUT_PP) ||\
+ ((__MODE__) == GPIO_MODE_OUTPUT_OD) ||\
+ ((__MODE__) == GPIO_MODE_AF_PP) ||\
+ ((__MODE__) == GPIO_MODE_AF_OD) ||\
+ ((__MODE__) == GPIO_MODE_IT_RISING) ||\
+ ((__MODE__) == GPIO_MODE_IT_FALLING) ||\
+ ((__MODE__) == GPIO_MODE_IT_RISING_FALLING) ||\
+ ((__MODE__) == GPIO_MODE_EVT_RISING) ||\
+ ((__MODE__) == GPIO_MODE_EVT_FALLING) ||\
+ ((__MODE__) == GPIO_MODE_EVT_RISING_FALLING) ||\
+ ((__MODE__) == GPIO_MODE_ANALOG))
+
+
+/** @defgroup GPIO_speed_define Speed definition
+ * @brief GPIO Output Maximum frequency
+ * @{
+ */
+#define GPIO_SPEED_FREQ_LOW (0x00000000U) /*!< range up to 0.4 MHz, please refer to the product datasheet */
+#define GPIO_SPEED_FREQ_MEDIUM (0x00000001U) /*!< range 0.4 MHz to 2 MHz, please refer to the product datasheet */
+#define GPIO_SPEED_FREQ_HIGH (0x00000002U) /*!< range 2 MHz to 10 MHz, please refer to the product datasheet */
+#define GPIO_SPEED_FREQ_VERY_HIGH (0x00000003U) /*!< range 10 MHz to 35 MHz, please refer to the product datasheet */
+
+/**
+ * @}
+ */
+
+#define IS_GPIO_SPEED(__SPEED__) (((__SPEED__) == GPIO_SPEED_FREQ_LOW ) || ((__SPEED__) == GPIO_SPEED_FREQ_MEDIUM ) || \
+ ((__SPEED__) == GPIO_SPEED_FREQ_HIGH ) || ((__SPEED__) == GPIO_SPEED_FREQ_VERY_HIGH))
+
+
+/** @defgroup GPIO_pull_define Pull definition
+ * @brief GPIO Pull-Up or Pull-Down Activation
+ * @{
+ */
+#define GPIO_NOPULL (0x00000000U) /*!< No Pull-up or Pull-down activation */
+#define GPIO_PULLUP (0x00000001U) /*!< Pull-up activation */
+#define GPIO_PULLDOWN (0x00000002U) /*!< Pull-down activation */
+
+/**
+ * @}
+ */
+
+#define IS_GPIO_PULL(__PULL__) (((__PULL__) == GPIO_NOPULL) || ((__PULL__) == GPIO_PULLUP) || \
+ ((__PULL__) == GPIO_PULLDOWN))
+
+
+/**
+ * @}
+ */
+/******************************************************************************/
+/* Exported macro ------------------------------------------------------------*/
+/******************************************************************************/
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup GPIO_Exported_Macro GPIO Exported Macros
+ * @{
+ */
+/**
+ * @brief Checks whether the specified EXTI line flag is set or not.
+ * @param __EXTI_LINE__ specifies the EXTI line flag to check.
+ * This parameter can be GPIO_PIN_x where x can be(0..15)
+ * @retval The new state of __EXTI_LINE__ (SET or RESET).
+ */
+#define __HAL_GPIO_EXTI_GET_FLAG(__EXTI_LINE__) (EXTI->PR & (__EXTI_LINE__))
+
+/**
+ * @brief Clears the EXTI's line pending flags.
+ * @param __EXTI_LINE__ specifies the EXTI lines flags to clear.
+ * This parameter can be any combination of GPIO_PIN_x where x can be (0..15)
+ * @retval None
+ */
+#define __HAL_GPIO_EXTI_CLEAR_FLAG(__EXTI_LINE__) (EXTI->PR = (__EXTI_LINE__))
+
+/**
+ * @brief Checks whether the specified EXTI line is asserted or not.
+ * @param __EXTI_LINE__ specifies the EXTI line to check.
+ * This parameter can be GPIO_PIN_x where x can be(0..15)
+ * @retval The new state of __EXTI_LINE__ (SET or RESET).
+ */
+#define __HAL_GPIO_EXTI_GET_IT(__EXTI_LINE__) (EXTI->PR & (__EXTI_LINE__))
+
+/**
+ * @brief Clears the EXTI's line pending bits.
+ * @param __EXTI_LINE__ specifies the EXTI lines to clear.
+ * This parameter can be any combination of GPIO_PIN_x where x can be (0..15)
+ * @retval None
+ */
+#define __HAL_GPIO_EXTI_CLEAR_IT(__EXTI_LINE__) (EXTI->PR = (__EXTI_LINE__))
+
+/**
+ * @brief Generates a Software interrupt on selected EXTI line.
+ * @param __EXTI_LINE__ specifies the EXTI line to check.
+ * This parameter can be GPIO_PIN_x where x can be(0..15)
+ * @retval None
+ */
+#define __HAL_GPIO_EXTI_GENERATE_SWIT(__EXTI_LINE__) (EXTI->SWIER |= (__EXTI_LINE__))
+
+/**
+ * @}
+ */
+/* Include GPIO HAL Extension module */
+#include "stm32l0xx_hal_gpio_ex.h"
+
+/******************************************************************************/
+/* Exported functions --------------------------------------------------------*/
+/******************************************************************************/
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup GPIO_Exported_Functions GPIO Exported Functions
+ * @{
+ */
+
+/* Initialization and de-initialization functions *******************************/
+/** @defgroup GPIO_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @{
+ */
+void HAL_GPIO_Init(GPIO_TypeDef *GPIOx, GPIO_InitTypeDef *GPIO_Init);
+void HAL_GPIO_DeInit(GPIO_TypeDef *GPIOx, uint32_t GPIO_Pin);
+/**
+ * @}
+ */
+
+/* IO operation functions *******************************************************/
+/** @defgroup GPIO_Exported_Functions_Group2 IO operation functions
+ * @{
+ */
+GPIO_PinState HAL_GPIO_ReadPin(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin);
+void HAL_GPIO_WritePin(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin, GPIO_PinState PinState);
+void HAL_GPIO_TogglePin(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin);
+HAL_StatusTypeDef HAL_GPIO_LockPin(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin);
+void HAL_GPIO_EXTI_IRQHandler(uint16_t GPIO_Pin);
+void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Define the private group ***********************************/
+/**************************************************************/
+/** @defgroup GPIO_Private GPIO Private
+ * @{
+ */
+/**
+ * @}
+ */
+/**************************************************************/
+
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32L0xx_HAL_GPIO_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
|