diff options
Diffstat (limited to 'www/apache-modified')
| -rwxr-xr-x | www/apache-modified/apache2.conf | 233 | ||||
| -rw-r--r-- | www/apache-modified/help.txt | 13 |
2 files changed, 0 insertions, 246 deletions
diff --git a/www/apache-modified/apache2.conf b/www/apache-modified/apache2.conf deleted file mode 100755 index 3bdb180..0000000 --- a/www/apache-modified/apache2.conf +++ /dev/null @@ -1,233 +0,0 @@ -# This is the main Apache server configuration file. It contains the -# configuration directives that give the server its instructions. -# See http://httpd.apache.org/docs/2.4/ for detailed information about -# the directives and /usr/share/doc/apache2/README.Debian about Debian specific -# hints. -# -# -# Summary of how the Apache 2 configuration works in Debian: -# The Apache 2 web server configuration in Debian is quite different to -# upstream's suggested way to configure the web server. This is because Debian's -# default Apache2 installation attempts to make adding and removing modules, -# virtual hosts, and extra configuration directives as flexible as possible, in -# order to make automating the changes and administering the server as easy as -# possible. - -# It is split into several files forming the configuration hierarchy outlined -# below, all located in the /etc/apache2/ directory: -# -# /etc/apache2/ -# |-- apache2.conf -# | `-- ports.conf -# |-- mods-enabled -# | |-- *.load -# | `-- *.conf -# |-- conf-enabled -# | `-- *.conf -# `-- sites-enabled -# `-- *.conf -# -# -# * apache2.conf is the main configuration file (this file). It puts the pieces -# together by including all remaining configuration files when starting up the -# web server. -# -# * ports.conf is always included from the main configuration file. It is -# supposed to determine listening ports for incoming connections which can be -# customized anytime. -# -# * Configuration files in the mods-enabled/, conf-enabled/ and sites-enabled/ -# directories contain particular configuration snippets which manage modules, -# global configuration fragments, or virtual host configurations, -# respectively. -# -# They are activated by symlinking available configuration files from their -# respective *-available/ counterparts. These should be managed by using our -# helpers a2enmod/a2dismod, a2ensite/a2dissite and a2enconf/a2disconf. See -# their respective man pages for detailed information. -# -# * The binary is called apache2. Due to the use of environment variables, in -# the default configuration, apache2 needs to be started/stopped with -# /etc/init.d/apache2 or apache2ctl. Calling /usr/bin/apache2 directly will not -# work with the default configuration. - - -# Global configuration -# - -# -# ServerRoot: The top of the directory tree under which the server's -# configuration, error, and log files are kept. -# -# NOTE! If you intend to place this on an NFS (or otherwise network) -# mounted filesystem then please read the Mutex documentation (available -# at <URL:http://httpd.apache.org/docs/2.4/mod/core.html#mutex>); -# you will save yourself a lot of trouble. -# -# Do NOT add a slash at the end of the directory path. -# -#ServerRoot "/etc/apache2" - -# -# The accept serialization lock file MUST BE STORED ON A LOCAL DISK. -# -#Mutex file:${APACHE_LOCK_DIR} default - -# -# The directory where shm and other runtime files will be stored. -# - -DefaultRuntimeDir ${APACHE_RUN_DIR} - -# -# PidFile: The file in which the server should record its process -# identification number when it starts. -# This needs to be set in /etc/apache2/envvars -# -PidFile ${APACHE_PID_FILE} - -# -# Timeout: The number of seconds before receives and sends time out. -# -Timeout 300 - -# -# KeepAlive: Whether or not to allow persistent connections (more than -# one request per connection). Set to "Off" to deactivate. -# -KeepAlive On - -# -# MaxKeepAliveRequests: The maximum number of requests to allow -# during a persistent connection. Set to 0 to allow an unlimited amount. -# We recommend you leave this number high, for maximum performance. -# -MaxKeepAliveRequests 100 - -# -# KeepAliveTimeout: Number of seconds to wait for the next request from the -# same client on the same connection. -# -KeepAliveTimeout 5 - - -# These need to be set in /etc/apache2/envvars -User ${APACHE_RUN_USER} -Group ${APACHE_RUN_GROUP} - -# -# HostnameLookups: Log the names of clients or just their IP addresses -# e.g., www.apache.org (on) or 204.62.129.132 (off). -# The default is off because it'd be overall better for the net if people -# had to knowingly turn this feature on, since enabling it means that -# each client request will result in AT LEAST one lookup request to the -# nameserver. -# -HostnameLookups Off - -# ErrorLog: The location of the error log file. -# If you do not specify an ErrorLog directive within a <VirtualHost> -# container, error messages relating to that virtual host will be -# logged here. If you *do* define an error logfile for a <VirtualHost> -# container, that host's errors will be logged there and not here. -# -ErrorLog ${APACHE_LOG_DIR}/error.log - -# -# LogLevel: Control the severity of messages logged to the error_log. -# Available values: trace8, ..., trace1, debug, info, notice, warn, -# error, crit, alert, emerg. -# It is also possible to configure the log level for particular modules, e.g. -# "LogLevel info ssl:warn" -# -LogLevel warn - -# Include module configuration: -IncludeOptional mods-enabled/*.load -IncludeOptional mods-enabled/*.conf - -# Include list of ports to listen on -Include ports.conf - - -# Sets the default security model of the Apache2 HTTPD server. It does -# not allow access to the root filesystem outside of /usr/share and /var/www. -# The former is used by web applications packaged in Debian, -# the latter may be used for local directories served by the web server. If -# your system is serving content from a sub-directory in /srv you must allow -# access here, or in any related virtual host. -<Directory /> - Options FollowSymLinks - AllowOverride None - Require all denied -</Directory> - -<Directory /usr/share> - AllowOverride None - Require all granted -</Directory> - -<Directory /var/www/> - Options Indexes FollowSymLinks - AllowOverride All - Require all granted - AddHandler mod_python .py - PythonHandler mod_python.publisher - PythonDebug On -</Directory> - -#<Directory /srv/> -# Options Indexes FollowSymLinks -# AllowOverride None -# Require all granted -#</Directory> - - - - -# AccessFileName: The name of the file to look for in each directory -# for additional configuration directives. See also the AllowOverride -# directive. -# -AccessFileName .htaccess - -# -# The following lines prevent .htaccess and .htpasswd files from being -# viewed by Web clients. -# -<FilesMatch "^\.ht"> - Require all denied -</FilesMatch> - - -# -# The following directives define some format nicknames for use with -# a CustomLog directive. -# -# These deviate from the Common Log Format definitions in that they use %O -# (the actual bytes sent including headers) instead of %b (the size of the -# requested file), because the latter makes it impossible to detect partial -# requests. -# -# Note that the use of %{X-Forwarded-For}i instead of %h is not recommended. -# Use mod_remoteip instead. -# -LogFormat "%v:%p %h %l %u %t \"%r\" %>s %O \"%{Referer}i\" \"%{User-Agent}i\"" vhost_combined -LogFormat "%h %l %u %t \"%r\" %>s %O \"%{Referer}i\" \"%{User-Agent}i\"" combined -LogFormat "%h %l %u %t \"%r\" %>s %O" common -LogFormat "%{Referer}i -> %U" referer -LogFormat "%{User-agent}i" agent - -# Include of directories ignores editors' and dpkg's backup files, -# see README.Debian for details. - -# Include generic snippets of statements -IncludeOptional conf-enabled/*.conf - -# Include the virtual host configurations: -IncludeOptional sites-enabled/*.conf - -# vim: syntax=apache ts=4 sw=4 sts=4 sr noet - -#ErrorDocument 404 /404.html - diff --git a/www/apache-modified/help.txt b/www/apache-modified/help.txt deleted file mode 100644 index 80b10ff..0000000 --- a/www/apache-modified/help.txt +++ /dev/null @@ -1,13 +0,0 @@ -#pour felix - -#first, you have to install apache2 (server), mod_python (to build html via python) and python-psycopg2 (to use psql) : -apt install apache2 libapache2-mod-python python-psycopg2 - -#replace the actual /var/www by our ATS-Project/www -cp -r /root/ATS-Project/www /var/ - -#give the x rights on the .py files -chmod +x /var/www/html *.py - -#replace the actual /etc/apache2/apache2.conf by our ATS-Project/www/apache-modified/apache2.conf -cp -r ... |