From bc481107298791bf0efd984ecc53dc92b8719878 Mon Sep 17 00:00:00 2001 From: Clyhtsuriva Date: Tue, 26 Jan 2021 18:26:26 +0100 Subject: Insertion du projet dans sa totalité MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit --- .../Inc/stm32l0xx_hal_uart_ex.h | 452 +++++++++++++++++++++ 1 file changed, 452 insertions(+) create mode 100644 simonnnnn/Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_uart_ex.h (limited to 'simonnnnn/Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_uart_ex.h') diff --git a/simonnnnn/Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_uart_ex.h b/simonnnnn/Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_uart_ex.h new file mode 100644 index 0000000..40914ba --- /dev/null +++ b/simonnnnn/Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_uart_ex.h @@ -0,0 +1,452 @@ +/** + ****************************************************************************** + * @file stm32l0xx_hal_uart_ex.h + * @author MCD Application Team + * @brief Header file of UART HAL Extended module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32L0xx_HAL_UART_EX_H +#define STM32L0xx_HAL_UART_EX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l0xx_hal_def.h" + +/** @addtogroup STM32L0xx_HAL_Driver + * @{ + */ + +/** @addtogroup UARTEx + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup UARTEx_Exported_Types UARTEx Exported Types + * @{ + */ + +/** + * @brief UART wake up from stop mode parameters + */ +typedef struct +{ + uint32_t WakeUpEvent; /*!< Specifies which event will activate the Wakeup from Stop mode flag (WUF). + This parameter can be a value of @ref UART_WakeUp_from_Stop_Selection. + If set to UART_WAKEUP_ON_ADDRESS, the two other fields below must + be filled up. */ + + uint16_t AddressLength; /*!< Specifies whether the address is 4 or 7-bit long. + This parameter can be a value of @ref UARTEx_WakeUp_Address_Length. */ + + uint8_t Address; /*!< UART/USART node address (7-bit long max). */ +} UART_WakeUpTypeDef; + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup UARTEx_Exported_Constants UARTEx Exported Constants + * @{ + */ + +/** @defgroup UARTEx_Word_Length UARTEx Word Length + * @{ + */ +#define UART_WORDLENGTH_7B USART_CR1_M1 /*!< 7-bit long UART frame */ +#define UART_WORDLENGTH_8B 0x00000000U /*!< 8-bit long UART frame */ +#define UART_WORDLENGTH_9B USART_CR1_M0 /*!< 9-bit long UART frame */ +/** + * @} + */ + +/** @defgroup UARTEx_WakeUp_Address_Length UARTEx WakeUp Address Length + * @{ + */ +#define UART_ADDRESS_DETECT_4B 0x00000000U /*!< 4-bit long wake-up address */ +#define UART_ADDRESS_DETECT_7B USART_CR2_ADDM7 /*!< 7-bit long wake-up address */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup UARTEx_Exported_Functions + * @{ + */ + +/** @addtogroup UARTEx_Exported_Functions_Group1 + * @{ + */ + +/* Initialization and de-initialization functions ****************************/ +HAL_StatusTypeDef HAL_RS485Ex_Init(UART_HandleTypeDef *huart, uint32_t Polarity, uint32_t AssertionTime, + uint32_t DeassertionTime); + +/** + * @} + */ + +/** @addtogroup UARTEx_Exported_Functions_Group2 + * @{ + */ + +void HAL_UARTEx_WakeupCallback(UART_HandleTypeDef *huart); + +/** + * @} + */ + +/** @addtogroup UARTEx_Exported_Functions_Group3 + * @{ + */ + +/* Peripheral Control functions **********************************************/ +HAL_StatusTypeDef HAL_UARTEx_StopModeWakeUpSourceConfig(UART_HandleTypeDef *huart, UART_WakeUpTypeDef WakeUpSelection); +HAL_StatusTypeDef HAL_UARTEx_EnableStopMode(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_UARTEx_DisableStopMode(UART_HandleTypeDef *huart); + +HAL_StatusTypeDef HAL_UARTEx_EnableClockStopMode(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_UARTEx_DisableClockStopMode(UART_HandleTypeDef *huart); + +HAL_StatusTypeDef HAL_MultiProcessorEx_AddressLength_Set(UART_HandleTypeDef *huart, uint32_t AddressLength); + + +HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint16_t *RxLen, uint32_t Timeout); +HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size); + + +/** + * @} + */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup UARTEx_Private_Macros UARTEx Private Macros + * @{ + */ + +/** @brief Report the UART clock source. + * @param __HANDLE__ specifies the UART Handle. + * @param __CLOCKSOURCE__ output variable. + * @retval UART clocking source, written in __CLOCKSOURCE__. + */ +#if defined (STM32L031xx) || defined (STM32L041xx) || defined (STM32L011xx) || defined (STM32L021xx) || defined (STM32L010xB) || defined (STM32L010x8) || defined (STM32L010x6) || defined (STM32L010x4) +#define UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \ + do { \ + if((__HANDLE__)->Instance == USART2) \ + { \ + switch(__HAL_RCC_GET_USART2_SOURCE()) \ + { \ + case RCC_USART2CLKSOURCE_PCLK1: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + break; \ + case RCC_USART2CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ + break; \ + case RCC_USART2CLKSOURCE_SYSCLK: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ + break; \ + case RCC_USART2CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else if((__HANDLE__)->Instance == LPUART1) \ + { \ + switch(__HAL_RCC_GET_LPUART1_SOURCE()) \ + { \ + case RCC_LPUART1CLKSOURCE_PCLK1: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + break; \ + case RCC_LPUART1CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ + break; \ + case RCC_LPUART1CLKSOURCE_SYSCLK: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ + break; \ + case RCC_LPUART1CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else \ + { \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + } \ + } while(0) + +#elif defined (STM32L051xx) || defined (STM32L052xx) || defined (STM32L053xx) || defined (STM32L062xx) || defined (STM32L063xx) + +#define UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \ + do { \ + if((__HANDLE__)->Instance == USART1) \ + { \ + switch(__HAL_RCC_GET_USART1_SOURCE()) \ + { \ + case RCC_USART1CLKSOURCE_PCLK2: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK2; \ + break; \ + case RCC_USART1CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ + break; \ + case RCC_USART1CLKSOURCE_SYSCLK: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ + break; \ + case RCC_USART1CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else if((__HANDLE__)->Instance == USART2) \ + { \ + switch(__HAL_RCC_GET_USART2_SOURCE()) \ + { \ + case RCC_USART2CLKSOURCE_PCLK1: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + break; \ + case RCC_USART2CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ + break; \ + case RCC_USART2CLKSOURCE_SYSCLK: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ + break; \ + case RCC_USART2CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else if((__HANDLE__)->Instance == LPUART1) \ + { \ + switch(__HAL_RCC_GET_LPUART1_SOURCE()) \ + { \ + case RCC_LPUART1CLKSOURCE_PCLK1: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + break; \ + case RCC_LPUART1CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ + break; \ + case RCC_LPUART1CLKSOURCE_SYSCLK: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ + break; \ + case RCC_LPUART1CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else \ + { \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + } \ + } while(0) + +#else + +#define UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \ + do { \ + if((__HANDLE__)->Instance == USART1) \ + { \ + switch(__HAL_RCC_GET_USART1_SOURCE()) \ + { \ + case RCC_USART1CLKSOURCE_PCLK2: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK2; \ + break; \ + case RCC_USART1CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ + break; \ + case RCC_USART1CLKSOURCE_SYSCLK: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ + break; \ + case RCC_USART1CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else if((__HANDLE__)->Instance == USART2) \ + { \ + switch(__HAL_RCC_GET_USART2_SOURCE()) \ + { \ + case RCC_USART2CLKSOURCE_PCLK1: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + break; \ + case RCC_USART2CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ + break; \ + case RCC_USART2CLKSOURCE_SYSCLK: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ + break; \ + case RCC_USART2CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else if((__HANDLE__)->Instance == USART4) \ + { \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + } \ + else if((__HANDLE__)->Instance == USART5) \ + { \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + } \ + else if((__HANDLE__)->Instance == LPUART1) \ + { \ + switch(__HAL_RCC_GET_LPUART1_SOURCE()) \ + { \ + case RCC_LPUART1CLKSOURCE_PCLK1: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + break; \ + case RCC_LPUART1CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ + break; \ + case RCC_LPUART1CLKSOURCE_SYSCLK: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ + break; \ + case RCC_LPUART1CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else \ + { \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + } \ + } while(0) +#endif /* (STM32L031xx) || (STM32L041xx) || (STM32L011xx) || (STM32L021xx) || (STM32L010xB) || (STM32L010x8) || (STM32L010x6) || (STM32L010x4)*/ + + +/** @brief Report the UART mask to apply to retrieve the received data + * according to the word length and to the parity bits activation. + * @note If PCE = 1, the parity bit is not included in the data extracted + * by the reception API(). + * This masking operation is not carried out in the case of + * DMA transfers. + * @param __HANDLE__ specifies the UART Handle. + * @retval None, the mask to apply to UART RDR register is stored in (__HANDLE__)->Mask field. + */ +#define UART_MASK_COMPUTATION(__HANDLE__) \ + do { \ + if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_9B) \ + { \ + if ((__HANDLE__)->Init.Parity == UART_PARITY_NONE) \ + { \ + (__HANDLE__)->Mask = 0x01FFU ; \ + } \ + else \ + { \ + (__HANDLE__)->Mask = 0x00FFU ; \ + } \ + } \ + else if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_8B) \ + { \ + if ((__HANDLE__)->Init.Parity == UART_PARITY_NONE) \ + { \ + (__HANDLE__)->Mask = 0x00FFU ; \ + } \ + else \ + { \ + (__HANDLE__)->Mask = 0x007FU ; \ + } \ + } \ + else if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_7B) \ + { \ + if ((__HANDLE__)->Init.Parity == UART_PARITY_NONE) \ + { \ + (__HANDLE__)->Mask = 0x007FU ; \ + } \ + else \ + { \ + (__HANDLE__)->Mask = 0x003FU ; \ + } \ + } \ + else \ + { \ + (__HANDLE__)->Mask = 0x0000U; \ + } \ + } while(0U) + +/** + * @brief Ensure that UART frame length is valid. + * @param __LENGTH__ UART frame length. + * @retval SET (__LENGTH__ is valid) or RESET (__LENGTH__ is invalid) + */ +#define IS_UART_WORD_LENGTH(__LENGTH__) (((__LENGTH__) == UART_WORDLENGTH_7B) || \ + ((__LENGTH__) == UART_WORDLENGTH_8B) || \ + ((__LENGTH__) == UART_WORDLENGTH_9B)) + +/** + * @brief Ensure that UART wake-up address length is valid. + * @param __ADDRESS__ UART wake-up address length. + * @retval SET (__ADDRESS__ is valid) or RESET (__ADDRESS__ is invalid) + */ +#define IS_UART_ADDRESSLENGTH_DETECT(__ADDRESS__) (((__ADDRESS__) == UART_ADDRESS_DETECT_4B) || \ + ((__ADDRESS__) == UART_ADDRESS_DETECT_7B)) + +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32L0xx_HAL_UART_EX_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ -- cgit v1.2.3