From 343e88525d1d13a6da5629d7137b2d8a15f9d2d8 Mon Sep 17 00:00:00 2001 From: Clyhtsuriva Date: Sun, 24 Jan 2021 23:56:07 +0100 Subject: Adding the whole Core --- Core/Src/main.c | 249 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 249 insertions(+) create mode 100644 Core/Src/main.c (limited to 'Core/Src/main.c') diff --git a/Core/Src/main.c b/Core/Src/main.c new file mode 100644 index 0000000..2ec05eb --- /dev/null +++ b/Core/Src/main.c @@ -0,0 +1,249 @@ +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * @file : main.c + * @brief : Main program body + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2020 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ +/* USER CODE END Header */ +/* Includes ------------------------------------------------------------------*/ +#include "main.h" +#include "usart.h" +#include "gpio.h" + +/* Private includes ----------------------------------------------------------*/ +/* USER CODE BEGIN Includes */ +#include "led.h" +#include "button.h" +#include "simon.h" +#include "lcd_1602.h" +/* USER CODE END Includes */ +/* Private typedef -----------------------------------------------------------*/ +/* USER CODE BEGIN PTD */ + +/* USER CODE END PTD */ + +/* Private define ------------------------------------------------------------*/ +/* USER CODE BEGIN PD */ +/* USER CODE END PD */ + +/* Private macro -------------------------------------------------------------*/ +/* USER CODE BEGIN PM */ + +/* USER CODE END PM */ + +/* Private variables ---------------------------------------------------------*/ + +/* USER CODE BEGIN PV */ + +/* USER CODE END PV */ + +/* Private function prototypes -----------------------------------------------*/ +void SystemClock_Config(void); +/* USER CODE BEGIN PFP */ + +/* USER CODE END PFP */ + +/* Private user code ---------------------------------------------------------*/ + +/* USER CODE BEGIN 0 */ +//Declaration des leds et buttons +LED_TypeDef led_rouge; //rouge +LED_TypeDef led_verte; //verte +LED_TypeDef led_jaune; //jaune +LED_TypeDef led_system; //vert sur la carte + +BUTTON_TypeDef button_rouge; //rouge +BUTTON_TypeDef button_vert; //vert +BUTTON_TypeDef button_jaune; //jaune +BUTTON_TypeDef button_start; //gris +BUTTON_TypeDef button_system; //bleu sur la carte +// +/* USER CODE END 0 */ + +/** + * @brief The application entry point. + * @retval int + */ +int main(void) +{ + /* USER CODE BEGIN 1 */ + + /* USER CODE END 1 */ + + /* MCU Configuration--------------------------------------------------------*/ + + /* Reset of all peripherals, Initializes the Flash interface and the Systick. */ + HAL_Init(); + + /* USER CODE BEGIN Init */ + + /* USER CODE END Init */ + + /* Configure the system clock */ + SystemClock_Config(); + + /* USER CODE BEGIN SysInit */ + + /* USER CODE END SysInit */ + + /* Initialize all configured peripherals */ + MX_GPIO_Init(); + MX_USART2_UART_Init(); + /* USER CODE BEGIN 2 */ + +// + //configuration de l'horloge du système en 16MHz + RCC->CR|=1; //activer HSI + RCC->CFGR&=~(0b11); + RCC->CFGR|=01; //selection de HSI + HAL_InitTick(16000000); +// + +// Init de nos leds et buttons + Led_init(&led_rouge, GPIOA,5); //led_rouge sur PA5 + Led_init(&led_verte, GPIOA,6); //led_verte sur PA6 + Led_init(&led_jaune, GPIOA,7); //led_jaune sur PA7 + Led_init(&led_system, GPIOB,6); //led_system sur PB6 + + Button_init(&button_rouge, GPIOC, 13); //button_jaune sur PC13 + Button_init(&button_vert, GPIOC, 14); //button_vert sur PC13 + Button_init(&button_jaune, GPIOC, 15); //button_jaune sur PC13 + Button_init(&button_start, GPIOH, 0); //button_start sur PH0 + Button_init(&button_system, GPIOH, 1); //button_system sur PH1 +// + +/* EXEMPLE D'UTILISATION POUR LED ET BUTTON + uint8_t last_button_state = 1; //button non appuyé + uint8_t current_button_state = 1; //button non appuyé + + for (;;) { + //lire l’état courant + current_button_state = Button_State(&button_system); + //si front descendant (bouton appuyé) + if (last_button_state == 1 && (current_button_state == 0)) { + Led_turnOn(&led_system); //allume + //suppression des rebonds + HAL_Delay(20); + } + //si front montant (bouton relâché) + if (last_button_state == 0 && (current_button_state != 0)) { + //suppression des rebonds + HAL_Delay(20); + Led_turnOff(&led_system); //eteind + } + //mise à jour de l’état précédent du bouton + last_button_state = current_button_state; + } +*/ + + /* USER CODE END 2 */ + + /* Infinite loop */ + + while (1) + { + /* USER CODE BEGIN WHILE */ + + lcd_init(); + lcd_clr(); + lcd_gotoxy(0,0); + lcd_puts("Hello World !"); + + /* USER CODE END WHILE */ + } + /* USER CODE BEGIN 3 */ + + /* USER CODE END 3 */ +} + +/** + * @brief System Clock Configuration + * @retval None + */ +void SystemClock_Config(void) +{ + RCC_OscInitTypeDef RCC_OscInitStruct = {0}; + RCC_ClkInitTypeDef RCC_ClkInitStruct = {0}; + RCC_PeriphCLKInitTypeDef PeriphClkInit = {0}; + + /** Configure the main internal regulator output voltage + */ + __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1); + /** Initializes the RCC Oscillators according to the specified parameters + * in the RCC_OscInitTypeDef structure. + */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI; + RCC_OscInitStruct.HSIState = RCC_HSI_ON; + RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT; + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE; + if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) + { + Error_Handler(); + } + /** Initializes the CPU, AHB and APB buses clocks + */ + RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK + |RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2; + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_HSI; + RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; + RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1; + RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; + + if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_0) != HAL_OK) + { + Error_Handler(); + } + PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_USART2; + PeriphClkInit.Usart2ClockSelection = RCC_USART2CLKSOURCE_PCLK1; + if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit) != HAL_OK) + { + Error_Handler(); + } +} + +/* USER CODE BEGIN 4 */ + +/* USER CODE END 4 */ + +/** + * @brief This function is executed in case of error occurrence. + * @retval None + */ +void Error_Handler(void) +{ + /* USER CODE BEGIN Error_Handler_Debug */ + /* User can add his own implementation to report the HAL error return state */ + + /* USER CODE END Error_Handler_Debug */ +} + +#ifdef USE_FULL_ASSERT +/** + * @brief Reports the name of the source file and the source line number + * where the assert_param error has occurred. + * @param file: pointer to the source file name + * @param line: assert_param error line source number + * @retval None + */ +void assert_failed(uint8_t *file, uint32_t line) +{ + /* USER CODE BEGIN 6 */ + /* User can add his own implementation to report the file name and line number, + tex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */ + /* USER CODE END 6 */ +} +#endif /* USE_FULL_ASSERT */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ -- cgit v1.2.3