From 343e88525d1d13a6da5629d7137b2d8a15f9d2d8 Mon Sep 17 00:00:00 2001
From: Clyhtsuriva <aimeric@adjutor.xyz>
Date: Sun, 24 Jan 2021 23:56:07 +0100
Subject: Adding the whole Core

---
 Core/Src/gpio.c | 87 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 87 insertions(+)
 create mode 100644 Core/Src/gpio.c

(limited to 'Core/Src/gpio.c')

diff --git a/Core/Src/gpio.c b/Core/Src/gpio.c
new file mode 100644
index 0000000..b80c7b9
--- /dev/null
+++ b/Core/Src/gpio.c
@@ -0,0 +1,87 @@
+/**
+  ******************************************************************************
+  * @file    gpio.c
+  * @brief   This file provides code for the configuration
+  *          of all used GPIO pins.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2021 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "gpio.h"
+
+/* USER CODE BEGIN 0 */
+
+/* USER CODE END 0 */
+
+/*----------------------------------------------------------------------------*/
+/* Configure GPIO                                                             */
+/*----------------------------------------------------------------------------*/
+/* USER CODE BEGIN 1 */
+
+/* USER CODE END 1 */
+
+/** Configure pins as
+        * Analog
+        * Input
+        * Output
+        * EVENT_OUT
+        * EXTI
+*/
+void MX_GPIO_Init(void)
+{
+
+  GPIO_InitTypeDef GPIO_InitStruct = {0};
+
+  /* GPIO Ports Clock Enable */
+  __HAL_RCC_GPIOC_CLK_ENABLE();
+  __HAL_RCC_GPIOH_CLK_ENABLE();
+  __HAL_RCC_GPIOA_CLK_ENABLE();
+  __HAL_RCC_GPIOB_CLK_ENABLE();
+
+  /*Configure GPIO pin Output Level */
+  HAL_GPIO_WritePin(LD2_GPIO_Port, LD2_Pin, GPIO_PIN_RESET);
+
+  /*Configure GPIO pin Output Level */
+  HAL_GPIO_WritePin(GPIOB, RS_Pin|RW_Pin|E_Pin|D4_Pin
+                          |D5_Pin|D6_Pin|D7_Pin, GPIO_PIN_RESET);
+
+  /*Configure GPIO pin : PtPin */
+  GPIO_InitStruct.Pin = B1_Pin;
+  GPIO_InitStruct.Mode = GPIO_MODE_IT_FALLING;
+  GPIO_InitStruct.Pull = GPIO_NOPULL;
+  HAL_GPIO_Init(B1_GPIO_Port, &GPIO_InitStruct);
+
+  /*Configure GPIO pin : PtPin */
+  GPIO_InitStruct.Pin = LD2_Pin;
+  GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
+  GPIO_InitStruct.Pull = GPIO_NOPULL;
+  GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_MEDIUM;
+  HAL_GPIO_Init(LD2_GPIO_Port, &GPIO_InitStruct);
+
+  /*Configure GPIO pins : PBPin PBPin PBPin PBPin
+                           PBPin PBPin PBPin */
+  GPIO_InitStruct.Pin = RS_Pin|RW_Pin|E_Pin|D4_Pin
+                          |D5_Pin|D6_Pin|D7_Pin;
+  GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
+  GPIO_InitStruct.Pull = GPIO_NOPULL;
+  GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_MEDIUM;
+  HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
+
+}
+
+/* USER CODE BEGIN 2 */
+
+/* USER CODE END 2 */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
-- 
cgit v1.2.3