diff options
Diffstat (limited to 'simonnnnn/Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_hal_pwr_ex.c')
-rw-r--r-- | simonnnnn/Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_hal_pwr_ex.c | 184 |
1 files changed, 184 insertions, 0 deletions
diff --git a/simonnnnn/Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_hal_pwr_ex.c b/simonnnnn/Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_hal_pwr_ex.c new file mode 100644 index 0000000..f20f7f9 --- /dev/null +++ b/simonnnnn/Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_hal_pwr_ex.c @@ -0,0 +1,184 @@ +/**
+ ******************************************************************************
+ * @file stm32l0xx_hal_pwr_ex.c
+ * @author MCD Application Team
+ * @brief Extended PWR HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the Power Controller (PWR) peripheral:
+ * + Extended Initialization and de-initialization functions
+ * + Extended Peripheral Control functions
+ *
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© Copyright(c) 2016 STMicroelectronics.
+ * All rights reserved.</center></h2>
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32l0xx_hal.h"
+
+#ifdef HAL_PWR_MODULE_ENABLED
+/** @addtogroup STM32L0xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup PWREx
+ * @{
+ */
+
+/** @addtogroup PWREx_Private
+ * @{
+ */
+
+/** @defgroup PWR_Extended_TimeOut_Value PWREx Flag Setting Time Out Value
+ * @{
+ */
+#define PWR_FLAG_SETTING_DELAY_US 50U
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+
+/** @addtogroup PWREx_Exported_Functions
+ * @brief Low Power modes configuration functions
+ *
+@verbatim
+
+ ===============================================================================
+ ##### Peripheral extended features functions #####
+ ===============================================================================
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Return Voltage Scaling Range.
+ * @retval VOS bit field (PWR_REGULATOR_VOLTAGE_SCALE1, PWR_REGULATOR_VOLTAGE_SCALE2 or PWR_REGULATOR_VOLTAGE_SCALE3)
+ */
+uint32_t HAL_PWREx_GetVoltageRange(void)
+{
+ return (PWR->CR & PWR_CR_VOS);
+}
+
+
+/**
+ * @brief Enables the Fast WakeUp from Ultra Low Power mode.
+ * @note This bit works in conjunction with ULP bit.
+ * Means, when ULP = 1 and FWU = 1 :VREFINT startup time is ignored when
+ * exiting from low power mode.
+ * @retval None
+ */
+void HAL_PWREx_EnableFastWakeUp(void)
+{
+ /* Enable the fast wake up */
+ SET_BIT(PWR->CR, PWR_CR_FWU);
+}
+
+/**
+ * @brief Disables the Fast WakeUp from Ultra Low Power mode.
+ * @retval None
+ */
+void HAL_PWREx_DisableFastWakeUp(void)
+{
+ /* Disable the fast wake up */
+ CLEAR_BIT(PWR->CR, PWR_CR_FWU);
+}
+
+/**
+ * @brief Enables the Ultra Low Power mode
+ * @retval None
+ */
+void HAL_PWREx_EnableUltraLowPower(void)
+{
+ /* Enable the Ultra Low Power mode */
+ SET_BIT(PWR->CR, PWR_CR_ULP);
+}
+
+/**
+ * @brief Disables the Ultra Low Power mode
+ * @retval None
+ */
+void HAL_PWREx_DisableUltraLowPower(void)
+{
+ /* Disable the Ultra Low Power mode */
+ CLEAR_BIT(PWR->CR, PWR_CR_ULP);
+}
+
+/**
+ * @brief Enable the Low Power Run mode.
+ * @note Low power run mode can only be entered when VCORE is in range 2.
+ * In addition, the dynamic voltage scaling must not be used when Low
+ * power run mode is selected. Only Stop and Sleep modes with regulator
+ * configured in Low power mode is allowed when Low power run mode is
+ * selected.
+ * @note The frequency of the system clock must be decreased to not exceed the
+ * frequency of RCC_MSIRANGE_1.
+ * @note In Low power run mode, all I/O pins keep the same state as in Run mode.
+ * @retval None
+ */
+void HAL_PWREx_EnableLowPowerRunMode(void)
+{
+ /* Enters the Low Power Run mode */
+ SET_BIT(PWR->CR, PWR_CR_LPSDSR);
+ SET_BIT(PWR->CR, PWR_CR_LPRUN);
+}
+
+/**
+ * @brief Disable the Low Power Run mode.
+ * @note Before HAL_PWREx_DisableLowPowerRunMode() completion, the function checks that
+ * REGLPF has been properly reset (otherwise, HAL_PWREx_DisableLowPowerRunMode
+ * returns HAL_TIMEOUT status). The system clock frequency can then be
+ * increased above 2 MHz.
+ * @retval HAL_StatusTypeDef
+ */
+HAL_StatusTypeDef HAL_PWREx_DisableLowPowerRunMode(void)
+{
+ uint32_t wait_loop_index = 0U;
+
+ /* Exit the Low Power Run mode */
+ CLEAR_BIT(PWR->CR, PWR_CR_LPRUN);
+ CLEAR_BIT(PWR->CR, PWR_CR_LPSDSR);
+
+ /* Wait until REGLPF is reset */
+ wait_loop_index = (PWR_FLAG_SETTING_DELAY_US * (SystemCoreClock / 1000000U));
+
+ while ((wait_loop_index != 0U) && (HAL_IS_BIT_SET(PWR->CSR, PWR_CSR_REGLPF)))
+ {
+ wait_loop_index--;
+ }
+
+ if (HAL_IS_BIT_SET(PWR->CSR, PWR_CSR_REGLPF))
+ {
+ return HAL_TIMEOUT;
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+#endif /* HAL_PWR_MODULE_ENABLED */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
|