diff options
Diffstat (limited to 'simonnnnn/Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_rcc_ex.h')
-rw-r--r-- | simonnnnn/Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_rcc_ex.h | 2021 |
1 files changed, 2021 insertions, 0 deletions
diff --git a/simonnnnn/Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_rcc_ex.h b/simonnnnn/Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_rcc_ex.h new file mode 100644 index 0000000..b3d9c7f --- /dev/null +++ b/simonnnnn/Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_rcc_ex.h @@ -0,0 +1,2021 @@ +/**
+ ******************************************************************************
+ * @file stm32l0xx_hal_rcc_ex.h
+ * @author MCD Application Team
+ * @brief Header file of RCC HAL Extension module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© Copyright(c) 2016 STMicroelectronics.
+ * All rights reserved.</center></h2>
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32L0xx_HAL_RCC_EX_H
+#define __STM32L0xx_HAL_RCC_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32l0xx_hal_def.h"
+
+/** @addtogroup STM32L0xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup RCCEx
+ * @{
+ */
+
+/** @addtogroup RCCEx_Private_Constants
+ * @{
+ */
+
+
+#if defined(CRS)
+/* CRS IT Error Mask */
+#define RCC_CRS_IT_ERROR_MASK ((uint32_t)(RCC_CRS_IT_TRIMOVF | RCC_CRS_IT_SYNCERR | RCC_CRS_IT_SYNCMISS))
+
+/* CRS Flag Error Mask */
+#define RCC_CRS_FLAG_ERROR_MASK ((uint32_t)(RCC_CRS_FLAG_TRIMOVF | RCC_CRS_FLAG_SYNCERR | RCC_CRS_FLAG_SYNCMISS))
+
+#endif /* CRS */
+/**
+ * @}
+ */
+
+/** @addtogroup RCCEx_Private_Macros
+ * @{
+ */
+#if defined (STM32L052xx) || defined(STM32L062xx)
+#define IS_RCC_PERIPHCLOCK(__CLK__) ((__CLK__) <= (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | RCC_PERIPHCLK_LPUART1 | \
+ RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2C2 | RCC_PERIPHCLK_RTC | \
+ RCC_PERIPHCLK_USB | RCC_PERIPHCLK_LPTIM1))
+#elif defined (STM32L053xx) || defined(STM32L063xx)
+#define IS_RCC_PERIPHCLOCK(__CLK__) ((__CLK__) <= (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | RCC_PERIPHCLK_LPUART1 | \
+ RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2C2 | RCC_PERIPHCLK_RTC | \
+ RCC_PERIPHCLK_USB | RCC_PERIPHCLK_LPTIM1 | RCC_PERIPHCLK_LCD))
+#elif defined (STM32L072xx) || defined(STM32L082xx)
+#define IS_RCC_PERIPHCLOCK(__CLK__) ((__CLK__) <= (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | RCC_PERIPHCLK_LPUART1 | \
+ RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2C2 | RCC_PERIPHCLK_RTC | \
+ RCC_PERIPHCLK_USB | RCC_PERIPHCLK_LPTIM1 | RCC_PERIPHCLK_I2C3 ))
+#elif defined (STM32L073xx) || defined(STM32L083xx)
+#define IS_RCC_PERIPHCLOCK(__CLK__) ((__CLK__) <= (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | RCC_PERIPHCLK_LPUART1 | \
+ RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2C2 | RCC_PERIPHCLK_RTC | \
+ RCC_PERIPHCLK_USB | RCC_PERIPHCLK_LPTIM1 | RCC_PERIPHCLK_I2C3 | \
+ RCC_PERIPHCLK_LCD))
+#endif
+
+#if defined(STM32L011xx) || defined(STM32L021xx) || defined(STM32L031xx) || defined(STM32L041xx) || \
+ defined(STM32L010xB) || defined(STM32L010x8) || defined(STM32L010x6) || defined(STM32L010x4)
+#define IS_RCC_PERIPHCLOCK(__CLK__) ((__CLK__) <= ( RCC_PERIPHCLK_USART2 | RCC_PERIPHCLK_LPUART1 | \
+ RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_RTC | \
+ RCC_PERIPHCLK_LPTIM1))
+#elif defined(STM32L051xx)
+#define IS_RCC_PERIPHCLOCK(__CLK__) ((__CLK__) <= (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | RCC_PERIPHCLK_LPUART1 | \
+ RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2C2 | RCC_PERIPHCLK_RTC | \
+ RCC_PERIPHCLK_LPTIM1))
+#elif defined(STM32L071xx) || defined(STM32L081xx)
+#define IS_RCC_PERIPHCLOCK(__CLK__) ((__CLK__) <= (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | RCC_PERIPHCLK_LPUART1 | \
+ RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2C2 | RCC_PERIPHCLK_RTC | \
+ RCC_PERIPHCLK_LPTIM1 | RCC_PERIPHCLK_I2C3))
+#endif
+
+#if defined (RCC_CCIPR_USART1SEL)
+#define IS_RCC_USART1CLKSOURCE(__SOURCE__) (((__SOURCE__) == RCC_USART1CLKSOURCE_PCLK2) || \
+ ((__SOURCE__) == RCC_USART1CLKSOURCE_SYSCLK) || \
+ ((__SOURCE__) == RCC_USART1CLKSOURCE_LSE) || \
+ ((__SOURCE__) == RCC_USART1CLKSOURCE_HSI))
+#endif /* RCC_CCIPR_USART1SEL */
+
+#define IS_RCC_USART2CLKSOURCE(__SOURCE__) (((__SOURCE__) == RCC_USART2CLKSOURCE_PCLK1) || \
+ ((__SOURCE__) == RCC_USART2CLKSOURCE_SYSCLK) || \
+ ((__SOURCE__) == RCC_USART2CLKSOURCE_LSE) || \
+ ((__SOURCE__) == RCC_USART2CLKSOURCE_HSI))
+
+#define IS_RCC_LPUART1CLKSOURCE(__SOURCE__) (((__SOURCE__) == RCC_LPUART1CLKSOURCE_PCLK1) || \
+ ((__SOURCE__) == RCC_LPUART1CLKSOURCE_SYSCLK) || \
+ ((__SOURCE__) == RCC_LPUART1CLKSOURCE_LSE) || \
+ ((__SOURCE__) == RCC_LPUART1CLKSOURCE_HSI))
+
+#define IS_RCC_I2C1CLKSOURCE(__SOURCE__) (((__SOURCE__) == RCC_I2C1CLKSOURCE_PCLK1) || \
+ ((__SOURCE__) == RCC_I2C1CLKSOURCE_SYSCLK)|| \
+ ((__SOURCE__) == RCC_I2C1CLKSOURCE_HSI))
+
+#if defined(RCC_CCIPR_I2C3SEL)
+#define IS_RCC_I2C3CLKSOURCE(__SOURCE__) (((__SOURCE__) == RCC_I2C3CLKSOURCE_PCLK1) || \
+ ((__SOURCE__) == RCC_I2C3CLKSOURCE_SYSCLK)|| \
+ ((__SOURCE__) == RCC_I2C3CLKSOURCE_HSI))
+#endif /* RCC_CCIPR_I2C3SEL */
+
+#if defined(USB)
+#define IS_RCC_USBCLKSOURCE(__SOURCE__) (((__SOURCE__) == RCC_USBCLKSOURCE_HSI48) || \
+ ((__SOURCE__) == RCC_USBCLKSOURCE_PLL))
+#endif /* USB */
+
+#if defined(RNG)
+#define IS_RCC_RNGCLKSOURCE(_SOURCE_) (((_SOURCE_) == RCC_RNGCLKSOURCE_HSI48) || \
+ ((_SOURCE_) == RCC_RNGCLKSOURCE_PLLCLK))
+#endif /* RNG */
+
+#if defined(RCC_CCIPR_HSI48SEL)
+#define IS_RCC_HSI48MCLKSOURCE(__HSI48MCLK__) (((__HSI48MCLK__) == RCC_HSI48M_PLL) || ((__HSI48MCLK__) == RCC_HSI48M_HSI48))
+#endif /* RCC_CCIPR_HSI48SEL */
+
+#define IS_RCC_LPTIMCLK(__LPTIMCLK_) (((__LPTIMCLK_) == RCC_LPTIM1CLKSOURCE_PCLK1) || \
+ ((__LPTIMCLK_) == RCC_LPTIM1CLKSOURCE_LSI) || \
+ ((__LPTIMCLK_) == RCC_LPTIM1CLKSOURCE_HSI) || \
+ ((__LPTIMCLK_) == RCC_LPTIM1CLKSOURCE_LSE))
+
+#define IS_RCC_STOPWAKEUP_CLOCK(__SOURCE__) (((__SOURCE__) == RCC_STOP_WAKEUPCLOCK_MSI) || \
+ ((__SOURCE__) == RCC_STOP_WAKEUPCLOCK_HSI))
+
+#define IS_RCC_LSE_DRIVE(__DRIVE__) (((__DRIVE__) == RCC_LSEDRIVE_LOW) || ((__SOURCE__) == RCC_LSEDRIVE_MEDIUMLOW) || \
+ ((__DRIVE__) == RCC_LSEDRIVE_MEDIUMHIGH) || ((__SOURCE__) == RCC_LSEDRIVE_HIGH))
+
+#if defined(CRS)
+
+#define IS_RCC_CRS_SYNC_SOURCE(_SOURCE_) (((_SOURCE_) == RCC_CRS_SYNC_SOURCE_GPIO) || \
+ ((_SOURCE_) == RCC_CRS_SYNC_SOURCE_LSE) || \
+ ((_SOURCE_) == RCC_CRS_SYNC_SOURCE_USB))
+#define IS_RCC_CRS_SYNC_DIV(_DIV_) (((_DIV_) == RCC_CRS_SYNC_DIV1) || ((_DIV_) == RCC_CRS_SYNC_DIV2) || \
+ ((_DIV_) == RCC_CRS_SYNC_DIV4) || ((_DIV_) == RCC_CRS_SYNC_DIV8) || \
+ ((_DIV_) == RCC_CRS_SYNC_DIV16) || ((_DIV_) == RCC_CRS_SYNC_DIV32) || \
+ ((_DIV_) == RCC_CRS_SYNC_DIV64) || ((_DIV_) == RCC_CRS_SYNC_DIV128))
+#define IS_RCC_CRS_SYNC_POLARITY(_POLARITY_) (((_POLARITY_) == RCC_CRS_SYNC_POLARITY_RISING) || \
+ ((_POLARITY_) == RCC_CRS_SYNC_POLARITY_FALLING))
+#define IS_RCC_CRS_RELOADVALUE(_VALUE_) (((_VALUE_) <= 0xFFFFU))
+#define IS_RCC_CRS_ERRORLIMIT(_VALUE_) (((_VALUE_) <= 0xFFU))
+#define IS_RCC_CRS_HSI48CALIBRATION(_VALUE_) (((_VALUE_) <= 0x3FU))
+#define IS_RCC_CRS_FREQERRORDIR(_DIR_) (((_DIR_) == RCC_CRS_FREQERRORDIR_UP) || \
+ ((_DIR_) == RCC_CRS_FREQERRORDIR_DOWN))
+#endif /* CRS */
+/**
+ * @}
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/** @defgroup RCCEx_Exported_Types RCCEx Exported Types
+ * @{
+ */
+
+/**
+ * @brief RCC extended clocks structure definition
+ */
+typedef struct
+{
+ uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured.
+ This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */
+
+ uint32_t RTCClockSelection; /*!< specifies the RTC clock source.
+ This parameter can be a value of @ref RCC_RTC_LCD_Clock_Source */
+
+#if defined(LCD)
+
+ uint32_t LCDClockSelection; /*!< specifies the LCD clock source.
+ This parameter can be a value of @ref RCC_RTC_LCD_Clock_Source */
+
+#endif /* LCD */
+#if defined(RCC_CCIPR_USART1SEL)
+ uint32_t Usart1ClockSelection; /*!< USART1 clock source
+ This parameter can be a value of @ref RCCEx_USART1_Clock_Source */
+#endif /* RCC_CCIPR_USART1SEL */
+ uint32_t Usart2ClockSelection; /*!< USART2 clock source
+ This parameter can be a value of @ref RCCEx_USART2_Clock_Source */
+
+ uint32_t Lpuart1ClockSelection; /*!< LPUART1 clock source
+ This parameter can be a value of @ref RCCEx_LPUART1_Clock_Source */
+
+ uint32_t I2c1ClockSelection; /*!< I2C1 clock source
+ This parameter can be a value of @ref RCCEx_I2C1_Clock_Source */
+
+#if defined(RCC_CCIPR_I2C3SEL)
+ uint32_t I2c3ClockSelection; /*!< I2C3 clock source
+ This parameter can be a value of @ref RCCEx_I2C3_Clock_Source */
+#endif /* RCC_CCIPR_I2C3SEL */
+ uint32_t LptimClockSelection; /*!< LPTIM1 clock source
+ This parameter can be a value of @ref RCCEx_LPTIM1_Clock_Source */
+#if defined(USB)
+ uint32_t UsbClockSelection; /*!< Specifies USB and RNG Clock Selection
+ This parameter can be a value of @ref RCCEx_USB_Clock_Source */
+#endif /* USB */
+} RCC_PeriphCLKInitTypeDef;
+
+#if defined (CRS)
+/**
+ * @brief RCC_CRS Init structure definition
+ */
+typedef struct
+{
+ uint32_t Prescaler; /*!< Specifies the division factor of the SYNC signal.
+ This parameter can be a value of @ref RCCEx_CRS_SynchroDivider */
+
+ uint32_t Source; /*!< Specifies the SYNC signal source.
+ This parameter can be a value of @ref RCCEx_CRS_SynchroSource */
+
+ uint32_t Polarity; /*!< Specifies the input polarity for the SYNC signal source.
+ This parameter can be a value of @ref RCCEx_CRS_SynchroPolarity */
+
+ uint32_t ReloadValue; /*!< Specifies the value to be loaded in the frequency error counter with each SYNC event.
+ It can be calculated in using macro @ref __HAL_RCC_CRS_RELOADVALUE_CALCULATE(__FTARGET__, __FSYNC__)
+ This parameter must be a number between 0 and 0xFFFF or a value of @ref RCCEx_CRS_ReloadValueDefault .*/
+
+ uint32_t ErrorLimitValue; /*!< Specifies the value to be used to evaluate the captured frequency error value.
+ This parameter must be a number between 0 and 0xFF or a value of @ref RCCEx_CRS_ErrorLimitDefault */
+
+ uint32_t HSI48CalibrationValue; /*!< Specifies a user-programmable trimming value to the HSI48 oscillator.
+ This parameter must be a number between 0 and 0x3F or a value of @ref RCCEx_CRS_HSI48CalibrationDefault */
+
+}RCC_CRSInitTypeDef;
+
+/**
+ * @brief RCC_CRS Synchronization structure definition
+ */
+typedef struct
+{
+ uint32_t ReloadValue; /*!< Specifies the value loaded in the Counter reload value.
+ This parameter must be a number between 0 and 0xFFFF */
+
+ uint32_t HSI48CalibrationValue; /*!< Specifies value loaded in HSI48 oscillator smooth trimming.
+ This parameter must be a number between 0 and 0x3F */
+
+ uint32_t FreqErrorCapture; /*!< Specifies the value loaded in the .FECAP, the frequency error counter
+ value latched in the time of the last SYNC event.
+ This parameter must be a number between 0 and 0xFFFF */
+
+ uint32_t FreqErrorDirection; /*!< Specifies the value loaded in the .FEDIR, the counting direction of the
+ frequency error counter latched in the time of the last SYNC event.
+ It shows whether the actual frequency is below or above the target.
+ This parameter must be a value of @ref RCCEx_CRS_FreqErrorDirection*/
+
+}RCC_CRSSynchroInfoTypeDef;
+
+#endif /* CRS */
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup RCCEx_Exported_Constants RCCEx Exported Constants
+ * @{
+ */
+
+
+/** @defgroup RCCEx_EXTI_LINE_LSECSS RCC LSE CSS external interrupt line
+ * @{
+ */
+#define RCC_EXTI_LINE_LSECSS (EXTI_IMR_IM19) /*!< External interrupt line 19 connected to the LSE CSS EXTI Line */
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_Periph_Clock_Selection RCCEx Periph Clock Selection
+ * @{
+ */
+#if defined(RCC_CCIPR_USART1SEL)
+#define RCC_PERIPHCLK_USART1 (0x00000001U)
+#endif /* RCC_CCIPR_USART1SEL */
+#define RCC_PERIPHCLK_USART2 (0x00000002U)
+#define RCC_PERIPHCLK_LPUART1 (0x00000004U)
+#define RCC_PERIPHCLK_I2C1 (0x00000008U)
+#define RCC_PERIPHCLK_I2C2 (0x00000010U)
+#define RCC_PERIPHCLK_RTC (0x00000020U)
+#if defined(USB)
+#define RCC_PERIPHCLK_USB (0x00000040U)
+#endif /* USB */
+#define RCC_PERIPHCLK_LPTIM1 (0x00000080U)
+#if defined(LCD)
+#define RCC_PERIPHCLK_LCD (0x00000800U)
+#endif /* LCD */
+#if defined(RCC_CCIPR_I2C3SEL)
+#define RCC_PERIPHCLK_I2C3 (0x00000100U)
+#endif /* RCC_CCIPR_I2C3SEL */
+
+/**
+ * @}
+ */
+
+#if defined (RCC_CCIPR_USART1SEL)
+/** @defgroup RCCEx_USART1_Clock_Source RCCEx USART1 Clock Source
+ * @{
+ */
+#define RCC_USART1CLKSOURCE_PCLK2 (0x00000000U)
+#define RCC_USART1CLKSOURCE_SYSCLK RCC_CCIPR_USART1SEL_0
+#define RCC_USART1CLKSOURCE_HSI RCC_CCIPR_USART1SEL_1
+#define RCC_USART1CLKSOURCE_LSE (RCC_CCIPR_USART1SEL_0 | RCC_CCIPR_USART1SEL_1)
+/**
+ * @}
+ */
+#endif /* RCC_CCIPR_USART1SEL */
+
+/** @defgroup RCCEx_USART2_Clock_Source RCCEx USART2 Clock Source
+ * @{
+ */
+#define RCC_USART2CLKSOURCE_PCLK1 (0x00000000U)
+#define RCC_USART2CLKSOURCE_SYSCLK RCC_CCIPR_USART2SEL_0
+#define RCC_USART2CLKSOURCE_HSI RCC_CCIPR_USART2SEL_1
+#define RCC_USART2CLKSOURCE_LSE (RCC_CCIPR_USART2SEL_0 | RCC_CCIPR_USART2SEL_1)
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_LPUART1_Clock_Source RCCEx LPUART1 Clock Source
+ * @{
+ */
+#define RCC_LPUART1CLKSOURCE_PCLK1 (0x00000000U)
+#define RCC_LPUART1CLKSOURCE_SYSCLK RCC_CCIPR_LPUART1SEL_0
+#define RCC_LPUART1CLKSOURCE_HSI RCC_CCIPR_LPUART1SEL_1
+#define RCC_LPUART1CLKSOURCE_LSE (RCC_CCIPR_LPUART1SEL_0 | RCC_CCIPR_LPUART1SEL_1)
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_I2C1_Clock_Source RCCEx I2C1 Clock Source
+ * @{
+ */
+#define RCC_I2C1CLKSOURCE_PCLK1 (0x00000000U)
+#define RCC_I2C1CLKSOURCE_SYSCLK RCC_CCIPR_I2C1SEL_0
+#define RCC_I2C1CLKSOURCE_HSI RCC_CCIPR_I2C1SEL_1
+/**
+ * @}
+ */
+
+#if defined(RCC_CCIPR_I2C3SEL)
+
+/** @defgroup RCCEx_I2C3_Clock_Source RCCEx I2C3 Clock Source
+ * @{
+ */
+#define RCC_I2C3CLKSOURCE_PCLK1 (0x00000000U)
+#define RCC_I2C3CLKSOURCE_SYSCLK RCC_CCIPR_I2C3SEL_0
+#define RCC_I2C3CLKSOURCE_HSI RCC_CCIPR_I2C3SEL_1
+/**
+ * @}
+ */
+#endif /* RCC_CCIPR_I2C3SEL */
+
+/** @defgroup RCCEx_TIM_PRescaler_Selection RCCEx TIM Prescaler Selection
+ * @{
+ */
+#define RCC_TIMPRES_DESACTIVATED ((uint8_t)0x00)
+#define RCC_TIMPRES_ACTIVATED ((uint8_t)0x01)
+/**
+ * @}
+ */
+
+#if defined(USB)
+/** @defgroup RCCEx_USB_Clock_Source RCCEx USB Clock Source
+ * @{
+ */
+#define RCC_USBCLKSOURCE_HSI48 RCC_CCIPR_HSI48SEL
+#define RCC_USBCLKSOURCE_PLL (0x00000000U)
+/**
+ * @}
+ */
+#endif /* USB */
+
+#if defined(RNG)
+/** @defgroup RCCEx_RNG_Clock_Source RCCEx RNG Clock Source
+ * @{
+ */
+#define RCC_RNGCLKSOURCE_HSI48 RCC_CCIPR_HSI48SEL
+#define RCC_RNGCLKSOURCE_PLLCLK (0x00000000U)
+/**
+ * @}
+ */
+#endif /* RNG */
+
+#if defined(RCC_CCIPR_HSI48SEL)
+/** @defgroup RCCEx_HSI48M_Clock_Source RCCEx HSI48M Clock Source
+ * @{
+ */
+#define RCC_FLAG_HSI48 SYSCFG_CFGR3_VREFINT_RDYF
+
+#define RCC_HSI48M_PLL (0x00000000U)
+#define RCC_HSI48M_HSI48 RCC_CCIPR_HSI48SEL
+
+/**
+ * @}
+ */
+#endif /* RCC_CCIPR_HSI48SEL */
+
+/** @defgroup RCCEx_LPTIM1_Clock_Source RCCEx LPTIM1 Clock Source
+ * @{
+ */
+#define RCC_LPTIM1CLKSOURCE_PCLK1 (0x00000000U)
+#define RCC_LPTIM1CLKSOURCE_LSI RCC_CCIPR_LPTIM1SEL_0
+#define RCC_LPTIM1CLKSOURCE_HSI RCC_CCIPR_LPTIM1SEL_1
+#define RCC_LPTIM1CLKSOURCE_LSE RCC_CCIPR_LPTIM1SEL
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_StopWakeUp_Clock RCCEx StopWakeUp Clock
+ * @{
+ */
+
+#define RCC_STOP_WAKEUPCLOCK_MSI (0x00000000U)
+#define RCC_STOP_WAKEUPCLOCK_HSI RCC_CFGR_STOPWUCK
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_LSEDrive_Configuration RCCEx LSE Drive Configuration
+ * @{
+ */
+
+#define RCC_LSEDRIVE_LOW (0x00000000U)
+#define RCC_LSEDRIVE_MEDIUMLOW RCC_CSR_LSEDRV_0
+#define RCC_LSEDRIVE_MEDIUMHIGH RCC_CSR_LSEDRV_1
+#define RCC_LSEDRIVE_HIGH RCC_CSR_LSEDRV
+/**
+ * @}
+ */
+
+#if defined(CRS)
+
+/** @defgroup RCCEx_CRS_Status RCCEx CRS Status
+ * @{
+ */
+#define RCC_CRS_NONE (0x00000000U)
+#define RCC_CRS_TIMEOUT (0x00000001U)
+#define RCC_CRS_SYNCOK (0x00000002U)
+#define RCC_CRS_SYNCWARN (0x00000004U)
+#define RCC_CRS_SYNCERR (0x00000008U)
+#define RCC_CRS_SYNCMISS (0x00000010U)
+#define RCC_CRS_TRIMOVF (0x00000020U)
+
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_CRS_SynchroSource RCCEx CRS Synchronization Source
+ * @{
+ */
+#define RCC_CRS_SYNC_SOURCE_GPIO (0x00000000U) /*!< Synchro Signal source GPIO */
+#define RCC_CRS_SYNC_SOURCE_LSE CRS_CFGR_SYNCSRC_0 /*!< Synchro Signal source LSE */
+#define RCC_CRS_SYNC_SOURCE_USB CRS_CFGR_SYNCSRC_1 /*!< Synchro Signal source USB SOF (default)*/
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_CRS_SynchroDivider RCCEx CRS Synchronization Divider
+ * @{
+ */
+#define RCC_CRS_SYNC_DIV1 (0x00000000U) /*!< Synchro Signal not divided (default) */
+#define RCC_CRS_SYNC_DIV2 CRS_CFGR_SYNCDIV_0 /*!< Synchro Signal divided by 2 */
+#define RCC_CRS_SYNC_DIV4 CRS_CFGR_SYNCDIV_1 /*!< Synchro Signal divided by 4 */
+#define RCC_CRS_SYNC_DIV8 (CRS_CFGR_SYNCDIV_1 | CRS_CFGR_SYNCDIV_0) /*!< Synchro Signal divided by 8 */
+#define RCC_CRS_SYNC_DIV16 CRS_CFGR_SYNCDIV_2 /*!< Synchro Signal divided by 16 */
+#define RCC_CRS_SYNC_DIV32 (CRS_CFGR_SYNCDIV_2 | CRS_CFGR_SYNCDIV_0) /*!< Synchro Signal divided by 32 */
+#define RCC_CRS_SYNC_DIV64 (CRS_CFGR_SYNCDIV_2 | CRS_CFGR_SYNCDIV_1) /*!< Synchro Signal divided by 64 */
+#define RCC_CRS_SYNC_DIV128 CRS_CFGR_SYNCDIV /*!< Synchro Signal divided by 128 */
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_CRS_SynchroPolarity RCCEx CRS Synchronization Polarity
+ * @{
+ */
+#define RCC_CRS_SYNC_POLARITY_RISING (0x00000000U) /*!< Synchro Active on rising edge (default) */
+#define RCC_CRS_SYNC_POLARITY_FALLING CRS_CFGR_SYNCPOL /*!< Synchro Active on falling edge */
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_CRS_ReloadValueDefault RCCEx CRS Default Reload Value
+ * @{
+ */
+#define RCC_CRS_RELOADVALUE_DEFAULT (0x0000BB7FU) /*!< The reset value of the RELOAD field corresponds
+ to a target frequency of 48 MHz and a synchronization signal frequency of 1 kHz (SOF signal from USB). */
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_CRS_ErrorLimitDefault RCCEx CRS Default Error Limit Value
+ * @{
+ */
+#define RCC_CRS_ERRORLIMIT_DEFAULT (0x00000022U) /*!< Default Frequency error limit */
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_CRS_HSI48CalibrationDefault RCCEx CRS Default HSI48 Calibration vakye
+ * @{
+ */
+#define RCC_CRS_HSI48CALIBRATION_DEFAULT (0x00000020U) /*!< The default value is 32, which corresponds to the middle of the trimming interval.
+ The trimming step is around 67 kHz between two consecutive TRIM steps. A higher TRIM value
+ corresponds to a higher output frequency */
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_CRS_FreqErrorDirection RCCEx CRS Frequency Error Direction
+ * @{
+ */
+#define RCC_CRS_FREQERRORDIR_UP (0x00000000U) /*!< Upcounting direction, the actual frequency is above the target */
+#define RCC_CRS_FREQERRORDIR_DOWN CRS_ISR_FEDIR /*!< Downcounting direction, the actual frequency is below the target */
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_CRS_Interrupt_Sources RCCEx CRS Interrupt Sources
+ * @{
+ */
+#define RCC_CRS_IT_SYNCOK CRS_CR_SYNCOKIE /*!< SYNC event OK */
+#define RCC_CRS_IT_SYNCWARN CRS_CR_SYNCWARNIE /*!< SYNC warning */
+#define RCC_CRS_IT_ERR CRS_CR_ERRIE /*!< Error */
+#define RCC_CRS_IT_ESYNC CRS_CR_ESYNCIE /*!< Expected SYNC */
+#define RCC_CRS_IT_SYNCERR CRS_CR_ERRIE /*!< SYNC error */
+#define RCC_CRS_IT_SYNCMISS CRS_CR_ERRIE /*!< SYNC missed */
+#define RCC_CRS_IT_TRIMOVF CRS_CR_ERRIE /*!< Trimming overflow or underflow */
+
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_CRS_Flags RCCEx CRS Flags
+ * @{
+ */
+#define RCC_CRS_FLAG_SYNCOK CRS_ISR_SYNCOKF /*!< SYNC event OK flag */
+#define RCC_CRS_FLAG_SYNCWARN CRS_ISR_SYNCWARNF /*!< SYNC warning flag */
+#define RCC_CRS_FLAG_ERR CRS_ISR_ERRF /*!< Error flag */
+#define RCC_CRS_FLAG_ESYNC CRS_ISR_ESYNCF /*!< Expected SYNC flag */
+#define RCC_CRS_FLAG_SYNCERR CRS_ISR_SYNCERR /*!< SYNC error */
+#define RCC_CRS_FLAG_SYNCMISS CRS_ISR_SYNCMISS /*!< SYNC missed*/
+#define RCC_CRS_FLAG_TRIMOVF CRS_ISR_TRIMOVF /*!< Trimming overflow or underflow */
+
+/**
+ * @}
+ */
+
+#endif /* CRS */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup RCCEx_Exported_Macros RCCEx Exported Macros
+ * @{
+ */
+
+/** @defgroup RCCEx_Peripheral_Clock_Enable_Disable AHB Peripheral Clock Enable Disable
+ * @brief Enable or disable the AHB peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+
+#if defined(STM32L062xx) || defined(STM32L063xx) || defined(STM32L081xx) || defined(STM32L082xx) || defined(STM32L083xx) || defined(STM32L041xx) || defined(STM32L021xx)
+#define __HAL_RCC_AES_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHBENR, RCC_AHBENR_CRYPEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_CRYPEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_AES_CLK_DISABLE() CLEAR_BIT(RCC->AHBENR, (RCC_AHBENR_CRYPEN))
+
+#define __HAL_RCC_AES_IS_CLK_ENABLED() (READ_BIT(RCC->AHBENR, RCC_AHBENR_CRYPEN) != 0U)
+#define __HAL_RCC_AES_IS_CLK_DISABLED() (READ_BIT(RCC->AHBENR, RCC_AHBENR_CRYPEN) == 0U)
+
+#endif /* STM32L062xx || STM32L063xx || STM32L072xx || STM32L073xx || STM32L081xx || STM32L082xx || STM32L083xx || STM32L041xx || STM32L021xx */
+
+#if !defined(STM32L010xB) && !defined(STM32L010x8) && !defined(STM32L010x6) && !defined(STM32L010x4) && !defined(STM32L011xx) && !defined(STM32L021xx) && !defined(STM32L031xx) && !defined(STM32L041xx) && !defined(STM32L051xx) && !defined(STM32L071xx) && !defined(STM32L081xx)
+#define __HAL_RCC_TSC_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHBENR, RCC_AHBENR_TSCEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_TSCEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_TSC_CLK_DISABLE() CLEAR_BIT(RCC->AHBENR, (RCC_AHBENR_TSCEN))
+
+#define __HAL_RCC_TSC_IS_CLK_ENABLED() (READ_BIT(RCC->AHBENR, RCC_AHBENR_TSCEN) != 0U)
+#define __HAL_RCC_TSC_IS_CLK_DISABLED() (READ_BIT(RCC->AHBENR, RCC_AHBENR_TSCEN) == 0U)
+
+#define __HAL_RCC_RNG_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHBENR, RCC_AHBENR_RNGEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_RNGEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_RNG_CLK_DISABLE() CLEAR_BIT(RCC->AHBENR, (RCC_AHBENR_RNGEN))
+
+#define __HAL_RCC_RNG_IS_CLK_ENABLED() (READ_BIT(RCC->AHBENR, RCC_AHBENR_RNGEN) != 0U)
+#define __HAL_RCC_RNG_IS_CLK_DISABLED() (READ_BIT(RCC->AHBENR, RCC_AHBENR_RNGEN) == 0U)
+#endif /* !(STM32L010xB) && !(STM32L010x8) && !(STM32L010x6) && !(STM32L010x4) && !(STM32L011xx) && !(STM32L021xx) && !(STM32L031xx ) && !(STM32L041xx ) && !(STM32L051xx ) && !(STM32L071xx ) && !(STM32L081xx ) */
+
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_IOPORT_Clock_Enable_Disable IOPORT Peripheral Clock Enable Disable
+ * @brief Enable or disable the IOPORT peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#if defined(GPIOE)
+#define __HAL_RCC_GPIOE_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->IOPENR, RCC_IOPENR_GPIOEEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->IOPENR, RCC_IOPENR_GPIOEEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_GPIOE_CLK_DISABLE() CLEAR_BIT(RCC->IOPENR,(RCC_IOPENR_GPIOEEN))
+
+#define __HAL_RCC_GPIOE_IS_CLK_ENABLED() (READ_BIT(RCC->IOPENR, RCC_IOPENR_GPIOEEN) != 0U)
+#define __HAL_RCC_GPIOE_IS_CLK_DISABLED() (READ_BIT(RCC->IOPENR, RCC_IOPENR_GPIOEEN) == 0U)
+
+#endif /* GPIOE */
+#if defined(GPIOD)
+#define __HAL_RCC_GPIOD_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->IOPENR, RCC_IOPENR_GPIODEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->IOPENR, RCC_IOPENR_GPIODEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_GPIOD_CLK_DISABLE() CLEAR_BIT(RCC->IOPENR,(RCC_IOPENR_GPIODEN))
+
+#define __HAL_RCC_GPIOD_IS_CLK_ENABLED() (READ_BIT(RCC->IOPENR, RCC_IOPENR_GPIODEN) != 0U)
+#define __HAL_RCC_GPIOD_IS_CLK_DISABLED() (READ_BIT(RCC->IOPENR, RCC_IOPENR_GPIODEN) == 0U)
+
+#endif /* GPIOD */
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_APB1_Clock_Enable_Disable APB1 Peripheral Clock Enable Disable
+ * @brief Enable or disable the APB1 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+
+#if !defined(STM32L010xB) && !defined(STM32L010x8) && !defined(STM32L010x6) && !defined(STM32L010x4) && !defined(STM32L011xx) && !defined(STM32L021xx) && !defined(STM32L031xx) && !defined(STM32L041xx) && !defined(STM32L051xx) && !defined(STM32L071xx) && !defined(STM32L081xx)
+#define __HAL_RCC_USB_CLK_ENABLE() SET_BIT(RCC->APB1ENR, (RCC_APB1ENR_USBEN))
+#define __HAL_RCC_USB_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR, (RCC_APB1ENR_USBEN))
+
+#define __HAL_RCC_USB_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR, RCC_APB1ENR_USBEN) != 0U)
+#define __HAL_RCC_USB_IS_CLK_DISABLED() (READ_BIT(RCC->APB1ENR, RCC_APB1ENR_USBEN) == 0U)
+
+#define __HAL_RCC_CRS_CLK_ENABLE() SET_BIT(RCC->APB1ENR, (RCC_APB1ENR_CRSEN))
+#define __HAL_RCC_CRS_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR,(RCC_APB1ENR_CRSEN))
+
+#define __HAL_RCC_CRS_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR, RCC_APB1ENR_CRSEN) != 0U)
+#define __HAL_RCC_CRS_IS_CLK_DISABLED() (READ_BIT(RCC->APB1ENR, RCC_APB1ENR_CRSEN) == 0U)
+
+#endif /* !(STM32L010xB) && !(STM32L010x8) && !(STM32L010x6) && !(STM32L010x4) && !(STM32L011xx) && !(STM32L021xx) && !(STM32L031xx ) && !(STM32L041xx ) && !(STM32L051xx ) && !(STM32L071xx ) && !(STM32L081xx ) */
+
+
+#if defined(STM32L053xx) || defined(STM32L063xx) || defined(STM32L073xx) || defined(STM32L083xx)
+#define __HAL_RCC_LCD_CLK_ENABLE() SET_BIT(RCC->APB1ENR, (RCC_APB1ENR_LCDEN))
+#define __HAL_RCC_LCD_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR, (RCC_APB1ENR_LCDEN))
+
+#define __HAL_RCC_LCD_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR, RCC_APB1ENR_LCDEN) != 0U)
+#define __HAL_RCC_LCD_IS_CLK_DISABLED() (READ_BIT(RCC->APB1ENR, RCC_APB1ENR_LCDEN) == 0U)
+
+#endif /* STM32L053xx || STM32L063xx || STM32L073xx || STM32L083xx */
+
+#if defined(STM32L053xx) || defined(STM32L063xx) \
+ || defined(STM32L052xx) || defined(STM32L062xx) \
+ || defined(STM32L051xx)
+#define __HAL_RCC_TIM2_CLK_ENABLE() SET_BIT(RCC->APB1ENR, (RCC_APB1ENR_TIM2EN))
+#define __HAL_RCC_TIM6_CLK_ENABLE() SET_BIT(RCC->APB1ENR, (RCC_APB1ENR_TIM6EN))
+#define __HAL_RCC_SPI2_CLK_ENABLE() SET_BIT(RCC->APB1ENR, (RCC_APB1ENR_SPI2EN))
+#define __HAL_RCC_USART2_CLK_ENABLE() SET_BIT(RCC->APB1ENR, (RCC_APB1ENR_USART2EN))
+#define __HAL_RCC_LPUART1_CLK_ENABLE() SET_BIT(RCC->APB1ENR, (RCC_APB1ENR_LPUART1EN))
+#define __HAL_RCC_I2C1_CLK_ENABLE() SET_BIT(RCC->APB1ENR, (RCC_APB1ENR_I2C1EN))
+#define __HAL_RCC_I2C2_CLK_ENABLE() SET_BIT(RCC->APB1ENR, (RCC_APB1ENR_I2C2EN))
+#define __HAL_RCC_DAC_CLK_ENABLE() SET_BIT(RCC->APB1ENR, (RCC_APB1ENR_DACEN))
+#define __HAL_RCC_LPTIM1_CLK_ENABLE() SET_BIT(RCC->APB1ENR, (RCC_APB1ENR_LPTIM1EN))
+
+#define __HAL_RCC_TIM2_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR, (RCC_APB1ENR_TIM2EN))
+#define __HAL_RCC_TIM6_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR, (RCC_APB1ENR_TIM6EN))
+#define __HAL_RCC_SPI2_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR, (RCC_APB1ENR_SPI2EN))
+#define __HAL_RCC_USART2_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR, (RCC_APB1ENR_USART2EN))
+#define __HAL_RCC_LPUART1_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR, (RCC_APB1ENR_LPUART1EN))
+#define __HAL_RCC_I2C1_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR, (RCC_APB1ENR_I2C1EN))
+#define __HAL_RCC_I2C2_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR, (RCC_APB1ENR_I2C2EN))
+#define __HAL_RCC_DAC_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR, (RCC_APB1ENR_DACEN))
+#define __HAL_RCC_LPTIM1_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR, (RCC_APB1ENR_LPTIM1EN))
+
+#define __HAL_RCC_TIM2_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM2EN) != 0U)
+#define __HAL_RCC_TIM6_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM6EN) != 0U)
+#define __HAL_RCC_SPI2_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI2EN) != 0U)
+#define __HAL_RCC_USART2_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR, RCC_APB1ENR_USART2EN) != 0U)
+#define __HAL_RCC_LPUART1_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR, RCC_APB1ENR_LPUART1EN) != 0U)
+#define __HAL_RCC_I2C1_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C1EN) != 0U)
+#define __HAL_RCC_I2C2_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C2EN) != 0U)
+#define __HAL_RCC_DAC_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR, RCC_APB1ENR_DACEN) != 0U)
+#define __HAL_RCC_LPTIM1_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR, RCC_APB1ENR_LPTIM1EN) != 0U)
+#define __HAL_RCC_TIM2_IS_CLK_DISABLED() (READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM2EN) == 0U)
+#define __HAL_RCC_TIM6_IS_CLK_DISABLED() (READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM6EN) == 0U)
+#define __HAL_RCC_SPI2_IS_CLK_DISABLED() (READ_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI2EN) == 0U)
+#define __HAL_RCC_USART2_IS_CLK_DISABLED() (READ_BIT(RCC->APB1ENR, RCC_APB1ENR_USART2EN) == 0U)
+#define __HAL_RCC_LPUART1_IS_CLK_DISABLED() (READ_BIT(RCC->APB1ENR, RCC_APB1ENR_LPUART1EN) == 0U)
+#define __HAL_RCC_I2C1_IS_CLK_DISABLED() (READ_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C1EN) == 0U)
+#define __HAL_RCC_I2C2_IS_CLK_DISABLED() (READ_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C2EN) == 0U)
+#define __HAL_RCC_DAC_IS_CLK_DISABLED() (READ_BIT(RCC->APB1ENR, RCC_APB1ENR_DACEN) == 0U)
+#define __HAL_RCC_LPTIM1_IS_CLK_DISABLED() (READ_BIT(RCC->APB1ENR, RCC_APB1ENR_LPTIM1EN) == 0U)
+
+#endif /* STM32L053xx || STM32L063xx || */
+ /* STM32L052xx || STM32L062xx || */
+ /* STM32L051xx */
+
+#if defined(STM32L010xB) || defined(STM32L010x8) || defined(STM32L010x6) || defined(STM32L010x4) || \
+ defined(STM32L011xx) || defined(STM32L021xx) || defined(STM32L031xx) || defined(STM32L041xx)
+#define __HAL_RCC_TIM2_CLK_ENABLE() SET_BIT(RCC->APB1ENR, (RCC_APB1ENR_TIM2EN))
+#define __HAL_RCC_USART2_CLK_ENABLE() SET_BIT(RCC->APB1ENR, (RCC_APB1ENR_USART2EN))
+#define __HAL_RCC_LPUART1_CLK_ENABLE() SET_BIT(RCC->APB1ENR, (RCC_APB1ENR_LPUART1EN))
+#define __HAL_RCC_I2C1_CLK_ENABLE() SET_BIT(RCC->APB1ENR, (RCC_APB1ENR_I2C1EN))
+#define __HAL_RCC_LPTIM1_CLK_ENABLE() SET_BIT(RCC->APB1ENR, (RCC_APB1ENR_LPTIM1EN))
+
+#define __HAL_RCC_TIM2_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR, (RCC_APB1ENR_TIM2EN))
+#define __HAL_RCC_USART2_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR, (RCC_APB1ENR_USART2EN))
+#define __HAL_RCC_LPUART1_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR, (RCC_APB1ENR_LPUART1EN))
+#define __HAL_RCC_I2C1_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR, (RCC_APB1ENR_I2C1EN))
+#define __HAL_RCC_LPTIM1_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR, (RCC_APB1ENR_LPTIM1EN))
+
+#define __HAL_RCC_TIM2_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM2EN) != 0U)
+#define __HAL_RCC_USART2_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR, RCC_APB1ENR_USART2EN) != 0U)
+#define __HAL_RCC_LPUART1_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR, RCC_APB1ENR_LPUART1EN) != 0U)
+#define __HAL_RCC_I2C1_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C1EN) != 0U)
+#define __HAL_RCC_LPTIM1_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR, RCC_APB1ENR_LPTIM1EN) != 0U)
+#define __HAL_RCC_TIM2_IS_CLK_DISABLED() (READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM2EN) == 0U)
+#define __HAL_RCC_USART2_IS_CLK_DISABLED() (READ_BIT(RCC->APB1ENR, RCC_APB1ENR_USART2EN) == 0U)
+#define __HAL_RCC_LPUART1_IS_CLK_DISABLED() (READ_BIT(RCC->APB1ENR, RCC_APB1ENR_LPUART1EN) == 0U)
+#define __HAL_RCC_I2C1_IS_CLK_DISABLED() (READ_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C1EN) == 0U)
+#define __HAL_RCC_LPTIM1_IS_CLK_DISABLED() (READ_BIT(RCC->APB1ENR, RCC_APB1ENR_LPTIM1EN) == 0U)
+
+#endif /* STM32L010xB || STM32L010x8 || STM32L010x6 || STM32L010x4 || */
+ /* STM32L011xx || STM32L021xx || STM32L031xx || STM32L041xx */
+
+
+#if defined(STM32L073xx) || defined(STM32L083xx) \
+ || defined(STM32L072xx) || defined(STM32L082xx) \
+ || defined(STM32L071xx) || defined(STM32L081xx)
+#define __HAL_RCC_TIM2_CLK_ENABLE() SET_BIT(RCC->APB1ENR, (RCC_APB1ENR_TIM2EN))
+#define __HAL_RCC_TIM3_CLK_ENABLE() SET_BIT(RCC->APB1ENR, (RCC_APB1ENR_TIM3EN))
+#define __HAL_RCC_TIM6_CLK_ENABLE() SET_BIT(RCC->APB1ENR, (RCC_APB1ENR_TIM6EN))
+#define __HAL_RCC_TIM7_CLK_ENABLE() SET_BIT(RCC->APB1ENR, (RCC_APB1ENR_TIM7EN))
+#define __HAL_RCC_SPI2_CLK_ENABLE() SET_BIT(RCC->APB1ENR, (RCC_APB1ENR_SPI2EN))
+#define __HAL_RCC_USART2_CLK_ENABLE() SET_BIT(RCC->APB1ENR, (RCC_APB1ENR_USART2EN))
+#define __HAL_RCC_USART4_CLK_ENABLE() SET_BIT(RCC->APB1ENR, (RCC_APB1ENR_USART4EN))
+#define __HAL_RCC_USART5_CLK_ENABLE() SET_BIT(RCC->APB1ENR, (RCC_APB1ENR_USART5EN))
+#define __HAL_RCC_LPUART1_CLK_ENABLE() SET_BIT(RCC->APB1ENR, (RCC_APB1ENR_LPUART1EN))
+#define __HAL_RCC_I2C1_CLK_ENABLE() SET_BIT(RCC->APB1ENR, (RCC_APB1ENR_I2C1EN))
+#define __HAL_RCC_I2C2_CLK_ENABLE() SET_BIT(RCC->APB1ENR, (RCC_APB1ENR_I2C2EN))
+#define __HAL_RCC_I2C3_CLK_ENABLE() SET_BIT(RCC->APB1ENR, (RCC_APB1ENR_I2C3EN))
+#define __HAL_RCC_DAC_CLK_ENABLE() SET_BIT(RCC->APB1ENR, (RCC_APB1ENR_DACEN))
+#define __HAL_RCC_LPTIM1_CLK_ENABLE() SET_BIT(RCC->APB1ENR, (RCC_APB1ENR_LPTIM1EN))
+
+#define __HAL_RCC_TIM2_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR, (RCC_APB1ENR_TIM2EN))
+#define __HAL_RCC_TIM3_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR, (RCC_APB1ENR_TIM3EN))
+#define __HAL_RCC_TIM6_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR, (RCC_APB1ENR_TIM6EN))
+#define __HAL_RCC_TIM7_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR, (RCC_APB1ENR_TIM7EN))
+#define __HAL_RCC_SPI2_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR, (RCC_APB1ENR_SPI2EN))
+#define __HAL_RCC_USART2_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR, (RCC_APB1ENR_USART2EN))
+#define __HAL_RCC_USART4_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR, (RCC_APB1ENR_USART4EN))
+#define __HAL_RCC_USART5_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR, (RCC_APB1ENR_USART5EN))
+#define __HAL_RCC_LPUART1_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR, (RCC_APB1ENR_LPUART1EN))
+#define __HAL_RCC_I2C1_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR, (RCC_APB1ENR_I2C1EN))
+#define __HAL_RCC_I2C2_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR, (RCC_APB1ENR_I2C2EN))
+#define __HAL_RCC_I2C3_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR, (RCC_APB1ENR_I2C3EN))
+#define __HAL_RCC_DAC_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR, (RCC_APB1ENR_DACEN))
+#define __HAL_RCC_LPTIM1_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR, (RCC_APB1ENR_LPTIM1EN))
+
+#define __HAL_RCC_TIM2_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM2EN) != 0U)
+#define __HAL_RCC_TIM3_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM3EN) != 0U)
+#define __HAL_RCC_TIM6_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM6EN) != 0U)
+#define __HAL_RCC_TIM7_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM7EN) != 0U)
+#define __HAL_RCC_SPI2_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI2EN) != 0U)
+#define __HAL_RCC_USART2_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR, RCC_APB1ENR_USART2EN) != 0U)
+#define __HAL_RCC_USART4_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR, RCC_APB1ENR_USART4EN) != 0U)
+#define __HAL_RCC_USART5_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR, RCC_APB1ENR_USART5EN) != 0U)
+#define __HAL_RCC_LPUART1_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR, RCC_APB1ENR_LPUART1EN) != 0U)
+#define __HAL_RCC_I2C1_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C1EN) != 0U)
+#define __HAL_RCC_I2C2_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C2EN) != 0U)
+#define __HAL_RCC_I2C3_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C3EN) != 0U)
+#define __HAL_RCC_DAC_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR, RCC_APB1ENR_DACEN) != 0U)
+#define __HAL_RCC_LPTIM1_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR, RCC_APB1ENR_LPTIM1EN) != 0U)
+#define __HAL_RCC_TIM2_IS_CLK_DISABLED() (READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM2EN) == 0U)
+#define __HAL_RCC_TIM3_IS_CLK_DISABLED() (READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM3EN) == 0U)
+#define __HAL_RCC_TIM6_IS_CLK_DISABLED() (READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM6EN) == 0U)
+#define __HAL_RCC_TIM7_IS_CLK_DISABLED() (READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM7EN) == 0U)
+#define __HAL_RCC_SPI2_IS_CLK_DISABLED() (READ_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI2EN) == 0U)
+#define __HAL_RCC_USART2_IS_CLK_DISABLED() (READ_BIT(RCC->APB1ENR, RCC_APB1ENR_USART2EN) == 0U)
+#define __HAL_RCC_USART4_IS_CLK_DISABLED() (READ_BIT(RCC->APB1ENR, RCC_APB1ENR_USART4EN) == 0U)
+#define __HAL_RCC_USART5_IS_CLK_DISABLED() (READ_BIT(RCC->APB1ENR, RCC_APB1ENR_USART5EN) == 0U)
+#define __HAL_RCC_LPUART1_IS_CLK_DISABLED() (READ_BIT(RCC->APB1ENR, RCC_APB1ENR_LPUART1EN) == 0U)
+#define __HAL_RCC_I2C1_IS_CLK_DISABLED() (READ_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C1EN) == 0U)
+#define __HAL_RCC_I2C2_IS_CLK_DISABLED() (READ_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C2EN) == 0U)
+#define __HAL_RCC_I2C3_IS_CLK_DISABLED() (READ_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C3EN) == 0U)
+#define __HAL_RCC_DAC_IS_CLK_DISABLED() (READ_BIT(RCC->APB1ENR, RCC_APB1ENR_DACEN) == 0U)
+#define __HAL_RCC_LPTIM1_IS_CLK_DISABLED() (READ_BIT(RCC->APB1ENR, RCC_APB1ENR_LPTIM1EN) == 0U)
+
+#endif /* STM32L071xx || STM32L081xx || */
+ /* STM32L072xx || STM32L082xx || */
+ /* STM32L073xx || STM32L083xx */
+
+ /**
+ * @}
+ */
+
+#if defined(STM32L053xx) || defined(STM32L063xx) || defined(STM32L073xx) || defined(STM32L083xx) \
+ || defined(STM32L052xx) || defined(STM32L062xx) || defined(STM32L072xx) || defined(STM32L082xx) \
+ || defined(STM32L051xx) || defined(STM32L071xx) || defined(STM32L081xx) || defined(STM32L031xx) \
+ || defined(STM32L041xx) || defined(STM32L011xx) || defined(STM32L021xx) || defined(STM32L010xB) \
+ || defined(STM32L010x8) || defined(STM32L010x6) || defined(STM32L010x4)
+/** @defgroup RCCEx_APB2_Clock_Enable_Disable APB2 Peripheral Clock Enable Disable
+ * @brief Enable or disable the APB2 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_TIM21_CLK_ENABLE() SET_BIT(RCC->APB2ENR, (RCC_APB2ENR_TIM21EN))
+#if !defined (STM32L010x4) && !defined (STM32L010x6) && !defined (STM32L010x8) && !defined (STM32L011xx) && !defined (STM32L021xx)
+#define __HAL_RCC_TIM22_CLK_ENABLE() SET_BIT(RCC->APB2ENR, (RCC_APB2ENR_TIM22EN))
+#endif
+#define __HAL_RCC_ADC1_CLK_ENABLE() SET_BIT(RCC->APB2ENR, (RCC_APB2ENR_ADC1EN))
+#define __HAL_RCC_SPI1_CLK_ENABLE() SET_BIT(RCC->APB2ENR, (RCC_APB2ENR_SPI1EN))
+#define __HAL_RCC_USART1_CLK_ENABLE() SET_BIT(RCC->APB2ENR, (RCC_APB2ENR_USART1EN))
+
+#define __HAL_RCC_TIM21_CLK_DISABLE() CLEAR_BIT(RCC->APB2ENR, (RCC_APB2ENR_TIM21EN))
+#if !defined (STM32L010x4) && !defined (STM32L010x6) && !defined (STM32L010x8) && !defined (STM32L011xx) && !defined (STM32L021xx)
+#define __HAL_RCC_TIM22_CLK_DISABLE() CLEAR_BIT(RCC->APB2ENR, (RCC_APB2ENR_TIM22EN))
+#endif
+#define __HAL_RCC_ADC1_CLK_DISABLE() CLEAR_BIT(RCC->APB2ENR, (RCC_APB2ENR_ADC1EN))
+#define __HAL_RCC_SPI1_CLK_DISABLE() CLEAR_BIT(RCC->APB2ENR, (RCC_APB2ENR_SPI1EN))
+#define __HAL_RCC_USART1_CLK_DISABLE() CLEAR_BIT(RCC->APB2ENR, (RCC_APB2ENR_USART1EN))
+#if !defined (STM32L010x4) && !defined (STM32L010x6) && !defined (STM32L010x8) && !defined (STM32L010xB) && !defined(STM32L011xx) && !defined(STM32L021xx) && !defined(STM32L031xx) && !defined(STM32L041xx)
+#define __HAL_RCC_FIREWALL_CLK_ENABLE() SET_BIT(RCC->APB2ENR, (RCC_APB2ENR_MIFIEN))
+#define __HAL_RCC_FIREWALL_CLK_DISABLE() CLEAR_BIT(RCC->APB2ENR, (RCC_APB2ENR_MIFIEN))
+#endif /* !(STM32L010x4) && !(STM32L010x6) && !(STM32L010x8) && !(STM32L010xB) && !(STM32L011xx) && !(STM32L021xx) && !STM32L031xx && !STM32L041xx */
+
+#define __HAL_RCC_TIM21_IS_CLK_ENABLED() (READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM21EN) != 0U)
+#if !defined (STM32L010x4) && !defined (STM32L010x6) && !defined (STM32L010x8) && !defined (STM32L011xx) && !defined (STM32L021xx)
+#define __HAL_RCC_TIM22_IS_CLK_ENABLED() (READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM22EN) != 0U)
+#endif
+#define __HAL_RCC_ADC1_IS_CLK_ENABLED() (READ_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC1EN) != 0U)
+#define __HAL_RCC_SPI1_IS_CLK_ENABLED() (READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI1EN) != 0U)
+#define __HAL_RCC_USART1_IS_CLK_ENABLED() (READ_BIT(RCC->APB2ENR, RCC_APB2ENR_USART1EN) != 0U)
+
+#define __HAL_RCC_TIM21_IS_CLK_DISABLED() (READ_BIT(RCC->APB2ENR, (RCC_APB2ENR_TIM21EN) == 0U)
+#if !defined (STM32L010x4) && !defined (STM32L010x6) && !defined (STM32L010x8) && !defined (STM32L011xx) && !defined (STM32L021xx)
+#define __HAL_RCC_TIM22_IS_CLK_DISABLED() (READ_BIT(RCC->APB2ENR, (RCC_APB2ENR_TIM22EN) == 0U)
+#endif
+#define __HAL_RCC_ADC1_IS_CLK_DISABLED() (READ_BIT(RCC->APB2ENR, (RCC_APB2ENR_ADC1EN) == 0U)
+#define __HAL_RCC_SPI1_IS_CLK_DISABLED() (READ_BIT(RCC->APB2ENR, (RCC_APB2ENR_SPI1EN) == 0U)
+#define __HAL_RCC_USART1_IS_CLK_DISABLED() (READ_BIT(RCC->APB2ENR, (RCC_APB2ENR_USART1EN) == 0U)
+#if !defined (STM32L010x4) && !defined (STM32L010x6) && !defined (STM32L010x8) && !defined (STM32L010xB) && !defined(STM32L011xx) && !defined(STM32L021xx) && !defined(STM32L031xx) && !defined(STM32L041xx)
+#define __HAL_RCC_FIREWALL_IS_CLK_ENABLED() (READ_BIT(RCC->APB2ENR, RCC_APB2ENR_MIFIEN) != 0U)
+#define __HAL_RCC_FIREWALL_IS_CLK_DISABLED() (READ_BIT(RCC->APB2ENR, (RCC_APB2ENR_MIFIEN) == 0U)
+#endif /* !(STM32L010x4) && !(STM32L010x6) && !(STM32L010x8) && !(STM32L010xB) && !(STM32L011xx) && !(STM32L021xx) && !STM32L031xx && !STM32L041xx */
+
+#endif /* STM32L053xx || STM32L063xx || STM32L073xx || STM32L083xx || */
+ /* STM32L052xx || STM32L062xx || STM32L072xx || STM32L082xx || */
+ /* STM32L051xx || STM32L071xx || STM32L081xx || STM32L031xx || */
+ /* STM32L041xx || STM32L011xx || STM32L021xx || STM32L010xB || */
+ /* STM32L010x8 || STM32L010x6 || STM32L010x4 */
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_AHB_Force_Release_Reset AHB Peripheral Force Release Reset
+ * @brief Force or release AHB peripheral reset.
+ * @{
+ */
+#if defined(STM32L062xx) || defined(STM32L063xx) || defined(STM32L081xx) || defined(STM32L082xx) || defined(STM32L083xx) || defined(STM32L041xx) || defined(STM32L021xx)
+#define __HAL_RCC_AES_FORCE_RESET() SET_BIT(RCC->AHBRSTR, (RCC_AHBRSTR_CRYPRST))
+#define __HAL_RCC_AES_RELEASE_RESET() CLEAR_BIT(RCC->AHBRSTR, (RCC_AHBRSTR_CRYPRST))
+#endif /* STM32L062xx || STM32L063xx || STM32L072xx || STM32L073xx || STM32L081xx || STM32L082xx || STM32L083xx || STM32L041xx || STM32L021xx*/
+
+#if !defined (STM32L010x4) && !defined (STM32L010x6) && !defined (STM32L010x8) && !defined (STM32L010xB) && !defined(STM32L011xx) && !defined(STM32L021xx) && !defined(STM32L031xx) && !defined(STM32L041xx) && !defined(STM32L051xx) && !defined(STM32L071xx) && !defined(STM32L081xx)
+#define __HAL_RCC_TSC_FORCE_RESET() SET_BIT(RCC->AHBRSTR, (RCC_AHBRSTR_TSCRST))
+#define __HAL_RCC_TSC_RELEASE_RESET() CLEAR_BIT(RCC->AHBRSTR, (RCC_AHBRSTR_TSCRST))
+#define __HAL_RCC_RNG_FORCE_RESET() SET_BIT(RCC->AHBRSTR, (RCC_AHBRSTR_RNGRST))
+#define __HAL_RCC_RNG_RELEASE_RESET() CLEAR_BIT(RCC->AHBRSTR, (RCC_AHBRSTR_RNGRST))
+#endif /* !(STM32L010x4) && !(STM32L010x6) && !(STM32L010x8) && !(STM32L010xB) && !(STM32L011xx) && !(STM32L021xx) && !(STM32L031xx ) && !(STM32L041xx ) && !(STM32L051xx ) && !(STM32L071xx ) && !(STM32L081xx ) */
+
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_IOPORT_Force_Release_Reset IOPORT Peripheral Force Release Reset
+ * @brief Force or release IOPORT peripheral reset.
+ * @{
+ */
+#if defined(STM32L073xx) || defined(STM32L083xx) \
+ || defined(STM32L072xx) || defined(STM32L082xx) \
+ || defined(STM32L071xx) || defined(STM32L081xx) \
+ || defined(STM32L010xB)
+#define __HAL_RCC_GPIOE_FORCE_RESET() SET_BIT(RCC->IOPRSTR, (RCC_IOPRSTR_GPIOERST))
+
+#define __HAL_RCC_GPIOE_RELEASE_RESET() CLEAR_BIT(RCC->IOPRSTR,(RCC_IOPRSTR_GPIOERST))
+
+#endif /* STM32L071xx || STM32L081xx || */
+ /* STM32L072xx || STM32L082xx || */
+ /* STM32L073xx || STM32L083xx || */
+ /* STM32L010xB */
+#if !defined(STM32L010x4) && !defined(STM32L010x6) && !defined(STM32L011xx) && !defined(STM32L021xx) && !defined(STM32L031xx) && !defined(STM32L041xx)
+#define __HAL_RCC_GPIOD_FORCE_RESET() SET_BIT(RCC->IOPRSTR, (RCC_IOPRSTR_GPIODRST))
+#define __HAL_RCC_GPIOD_RELEASE_RESET() CLEAR_BIT(RCC->IOPRSTR,(RCC_IOPRSTR_GPIODRST))
+#endif /* !(STM32L010x4) && !(STM32L010x6) && !(STM32L011xx) && !(STM32L021xx) && !(STM32L031xx ) && !(STM32L041xx ) */
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_APB1_Force_Release_Reset APB1 Peripheral Force Release Reset
+ * @brief Force or release APB1 peripheral reset.
+ * @{
+ */
+
+#if defined(STM32L053xx) || defined(STM32L063xx) \
+ || defined(STM32L052xx) || defined(STM32L062xx) \
+ || defined(STM32L051xx)
+#define __HAL_RCC_TIM2_FORCE_RESET() SET_BIT(RCC->APB1RSTR, (RCC_APB1RSTR_TIM2RST))
+#define __HAL_RCC_TIM6_FORCE_RESET() SET_BIT(RCC->APB1RSTR, (RCC_APB1RSTR_TIM6RST))
+#define __HAL_RCC_LPTIM1_FORCE_RESET() SET_BIT(RCC->APB1RSTR, (RCC_APB1RSTR_LPTIM1RST))
+#define __HAL_RCC_I2C1_FORCE_RESET() SET_BIT(RCC->APB1RSTR, (RCC_APB1RSTR_I2C1RST))
+#define __HAL_RCC_I2C2_FORCE_RESET() SET_BIT(RCC->APB1RSTR, (RCC_APB1RSTR_I2C2RST))
+#define __HAL_RCC_USART2_FORCE_RESET() SET_BIT(RCC->APB1RSTR, (RCC_APB1RSTR_USART2RST))
+#define __HAL_RCC_LPUART1_FORCE_RESET() SET_BIT(RCC->APB1RSTR, (RCC_APB1RSTR_LPUART1RST))
+#define __HAL_RCC_SPI2_FORCE_RESET() SET_BIT(RCC->APB1RSTR, (RCC_APB1RSTR_SPI2RST))
+#define __HAL_RCC_DAC_FORCE_RESET() SET_BIT(RCC->APB1RSTR, (RCC_APB1RSTR_DACRST))
+
+#define __HAL_RCC_TIM2_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR, (RCC_APB1RSTR_TIM2RST))
+#define __HAL_RCC_TIM6_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR, (RCC_APB1RSTR_TIM6RST))
+#define __HAL_RCC_LPTIM1_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR, (RCC_APB1RSTR_LPTIM1RST))
+#define __HAL_RCC_I2C1_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR, (RCC_APB1RSTR_I2C1RST))
+#define __HAL_RCC_I2C2_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR, (RCC_APB1RSTR_I2C2RST))
+#define __HAL_RCC_USART2_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR, (RCC_APB1RSTR_USART2RST))
+#define __HAL_RCC_LPUART1_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR, (RCC_APB1RSTR_LPUART1RST))
+#define __HAL_RCC_SPI2_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR, (RCC_APB1RSTR_SPI2RST))
+#define __HAL_RCC_DAC_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR, (RCC_APB1RSTR_DACRST))
+#endif /* STM32L053xx || STM32L063xx || */
+ /* STM32L052xx || STM32L062xx || */
+ /* STM32L051xx */
+#if defined(STM32L011xx) || defined(STM32L021xx) || defined(STM32L031xx) || defined(STM32L041xx) || \
+ defined(STM32L010xB) || defined(STM32L010x8) || defined(STM32L010x6) || defined(STM32L010x4)
+#define __HAL_RCC_TIM2_FORCE_RESET() SET_BIT(RCC->APB1RSTR, (RCC_APB1RSTR_TIM2RST))
+#define __HAL_RCC_LPTIM1_FORCE_RESET() SET_BIT(RCC->APB1RSTR, (RCC_APB1RSTR_LPTIM1RST))
+#define __HAL_RCC_I2C1_FORCE_RESET() SET_BIT(RCC->APB1RSTR, (RCC_APB1RSTR_I2C1RST))
+#define __HAL_RCC_USART2_FORCE_RESET() SET_BIT(RCC->APB1RSTR, (RCC_APB1RSTR_USART2RST))
+#define __HAL_RCC_LPUART1_FORCE_RESET() SET_BIT(RCC->APB1RSTR, (RCC_APB1RSTR_LPUART1RST))
+
+#define __HAL_RCC_TIM2_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR, (RCC_APB1RSTR_TIM2RST))
+#define __HAL_RCC_LPTIM1_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR, (RCC_APB1RSTR_LPTIM1RST))
+#define __HAL_RCC_I2C1_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR, (RCC_APB1RSTR_I2C1RST))
+#define __HAL_RCC_USART2_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR, (RCC_APB1RSTR_USART2RST))
+#define __HAL_RCC_LPUART1_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR, (RCC_APB1RSTR_LPUART1RST))
+#endif /* STM32L031xx || STM32L041xx || STM32L011xx || STM32L021xx || */
+ /* STM32L010xB || STM32L010x8 || STM32L010x6 || STM32L010x4 */
+
+#if defined(STM32L073xx) || defined(STM32L083xx) \
+ || defined(STM32L072xx) || defined(STM32L082xx) \
+ || defined(STM32L071xx) || defined(STM32L081xx)
+#define __HAL_RCC_TIM2_FORCE_RESET() SET_BIT(RCC->APB1RSTR, (RCC_APB1RSTR_TIM2RST))
+#define __HAL_RCC_TIM3_FORCE_RESET() SET_BIT(RCC->APB1RSTR, (RCC_APB1RSTR_TIM3RST))
+#define __HAL_RCC_TIM6_FORCE_RESET() SET_BIT(RCC->APB1RSTR, (RCC_APB1RSTR_TIM6RST))
+#define __HAL_RCC_TIM7_FORCE_RESET() SET_BIT(RCC->APB1RSTR, (RCC_APB1RSTR_TIM7RST))
+#define __HAL_RCC_LPTIM1_FORCE_RESET() SET_BIT(RCC->APB1RSTR, (RCC_APB1RSTR_LPTIM1RST))
+#define __HAL_RCC_I2C1_FORCE_RESET() SET_BIT(RCC->APB1RSTR, (RCC_APB1RSTR_I2C1RST))
+#define __HAL_RCC_I2C2_FORCE_RESET() SET_BIT(RCC->APB1RSTR, (RCC_APB1RSTR_I2C2RST))
+#define __HAL_RCC_I2C3_FORCE_RESET() SET_BIT(RCC->APB1RSTR, (RCC_APB1RSTR_I2C3RST))
+#define __HAL_RCC_USART2_FORCE_RESET() SET_BIT(RCC->APB1RSTR, (RCC_APB1RSTR_USART2RST))
+#define __HAL_RCC_USART4_FORCE_RESET() SET_BIT(RCC->APB1RSTR, (RCC_APB1RSTR_USART4RST))
+#define __HAL_RCC_USART5_FORCE_RESET() SET_BIT(RCC->APB1RSTR, (RCC_APB1RSTR_USART5RST))
+#define __HAL_RCC_LPUART1_FORCE_RESET() SET_BIT(RCC->APB1RSTR, (RCC_APB1RSTR_LPUART1RST))
+#define __HAL_RCC_SPI2_FORCE_RESET() SET_BIT(RCC->APB1RSTR, (RCC_APB1RSTR_SPI2RST))
+#define __HAL_RCC_DAC_FORCE_RESET() SET_BIT(RCC->APB1RSTR, (RCC_APB1RSTR_DACRST))
+
+#define __HAL_RCC_TIM2_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR, (RCC_APB1RSTR_TIM2RST))
+#define __HAL_RCC_TIM3_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR, (RCC_APB1RSTR_TIM3RST))
+#define __HAL_RCC_TIM6_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR, (RCC_APB1RSTR_TIM6RST))
+#define __HAL_RCC_TIM7_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR, (RCC_APB1RSTR_TIM7RST))
+#define __HAL_RCC_LPTIM1_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR, (RCC_APB1RSTR_LPTIM1RST))
+#define __HAL_RCC_I2C1_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR, (RCC_APB1RSTR_I2C1RST))
+#define __HAL_RCC_I2C2_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR, (RCC_APB1RSTR_I2C2RST))
+#define __HAL_RCC_I2C3_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR, (RCC_APB1RSTR_I2C3RST))
+#define __HAL_RCC_USART2_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR, (RCC_APB1RSTR_USART2RST))
+#define __HAL_RCC_USART4_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR, (RCC_APB1RSTR_USART4RST))
+#define __HAL_RCC_USART5_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR, (RCC_APB1RSTR_USART5RST))
+#define __HAL_RCC_LPUART1_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR, (RCC_APB1RSTR_LPUART1RST))
+#define __HAL_RCC_SPI2_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR, (RCC_APB1RSTR_SPI2RST))
+#define __HAL_RCC_DAC_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR, (RCC_APB1RSTR_DACRST))
+#endif /* STM32L071xx || STM32L081xx || */
+ /* STM32L072xx || STM32L082xx || */
+ /* STM32L073xx || STM32L083xx || */
+
+#if !defined(STM32L011xx) && !defined(STM32L021xx) && !defined(STM32L031xx) && !defined(STM32L041xx) && \
+ !defined(STM32L051xx) && !defined(STM32L071xx) && !defined(STM32L081xx) && \
+ !defined(STM32L010xB) && !defined(STM32L010x8) && !defined(STM32L010x6) && !defined(STM32L010x4)
+#define __HAL_RCC_USB_FORCE_RESET() SET_BIT(RCC->APB1RSTR, (RCC_APB1RSTR_USBRST))
+#define __HAL_RCC_USB_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR, (RCC_APB1RSTR_USBRST))
+#define __HAL_RCC_CRS_FORCE_RESET() SET_BIT(RCC->APB1RSTR, (RCC_APB1RSTR_CRSRST))
+#define __HAL_RCC_CRS_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR,(RCC_APB1RSTR_CRSRST))
+#endif /* !(STM32L011xx) && !(STM32L021xx) && !(STM32L031xx) && !(STM32L041xx) && */
+ /* !(STM32L051xx) && !(STM32L071xx) && !(STM32L081xx) && !(STM32L010xB) && */
+ /* !(STM32L010x8) && !(STM32L010x6) && !(STM32L010x4) && */
+
+#if defined(STM32L053xx) || defined(STM32L063xx) || defined(STM32L073xx) || defined(STM32L083xx)
+#define __HAL_RCC_LCD_FORCE_RESET() SET_BIT(RCC->APB1RSTR, (RCC_APB1RSTR_LCDRST))
+#define __HAL_RCC_LCD_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR, (RCC_APB1RSTR_LCDRST))
+#endif /* STM32L053xx || STM32L063xx || STM32L073xx || STM32L083xx */
+
+/**
+ * @}
+ */
+
+#if defined(STM32L053xx) || defined(STM32L063xx) || defined(STM32L073xx) || defined(STM32L083xx) \
+ || defined(STM32L052xx) || defined(STM32L062xx) || defined(STM32L072xx) || defined(STM32L082xx) \
+ || defined(STM32L051xx) || defined(STM32L071xx) || defined(STM32L081xx)
+
+/** @defgroup RCCEx_APB2_Force_Release_Reset APB2 Peripheral Force Release Reset
+ * @brief Force or release APB2 peripheral reset.
+ * @{
+ */
+#define __HAL_RCC_USART1_FORCE_RESET() SET_BIT(RCC->APB2RSTR, (RCC_APB2RSTR_USART1RST))
+#define __HAL_RCC_ADC1_FORCE_RESET() SET_BIT(RCC->APB2RSTR, (RCC_APB2RSTR_ADC1RST))
+#define __HAL_RCC_SPI1_FORCE_RESET() SET_BIT(RCC->APB2RSTR, (RCC_APB2RSTR_SPI1RST))
+#define __HAL_RCC_TIM21_FORCE_RESET() SET_BIT(RCC->APB2RSTR, (RCC_APB2RSTR_TIM21RST))
+#define __HAL_RCC_TIM22_FORCE_RESET() SET_BIT(RCC->APB2RSTR, (RCC_APB2RSTR_TIM22RST))
+
+#define __HAL_RCC_USART1_RELEASE_RESET() CLEAR_BIT(RCC->APB2RSTR, (RCC_APB2RSTR_USART1RST))
+#define __HAL_RCC_ADC1_RELEASE_RESET() CLEAR_BIT(RCC->APB2RSTR, (RCC_APB2RSTR_ADC1RST))
+#define __HAL_RCC_SPI1_RELEASE_RESET() CLEAR_BIT(RCC->APB2RSTR, (RCC_APB2RSTR_SPI1RST))
+#define __HAL_RCC_TIM21_RELEASE_RESET() CLEAR_BIT(RCC->APB2RSTR, (RCC_APB2RSTR_TIM21RST))
+#define __HAL_RCC_TIM22_RELEASE_RESET() CLEAR_BIT(RCC->APB2RSTR, (RCC_APB2RSTR_TIM22RST))
+
+#endif /* STM32L051xx || STM32L071xx || STM32L081xx || STM32L052xx || */
+ /* STM32L062xx || STM32L072xx || STM32L082xx || STM32L053xx || */
+ /* STM32L063xx || STM32L073xx || STM32L083xx */
+
+#if defined(STM32L011xx) || defined(STM32L021xx) || defined(STM32L031xx) || defined(STM32L041xx) || \
+ defined(STM32L010xB) || defined(STM32L010x8) || defined(STM32L010x6) || defined(STM32L010x4)
+#define __HAL_RCC_ADC1_FORCE_RESET() SET_BIT(RCC->APB2RSTR, (RCC_APB2RSTR_ADC1RST))
+#define __HAL_RCC_SPI1_FORCE_RESET() SET_BIT(RCC->APB2RSTR, (RCC_APB2RSTR_SPI1RST))
+#define __HAL_RCC_TIM21_FORCE_RESET() SET_BIT(RCC->APB2RSTR, (RCC_APB2RSTR_TIM21RST))
+#if !defined (STM32L010x4) && !defined (STM32L010x6) && !defined (STM32L010x8) && !defined (STM32L011xx) && !defined (STM32L021xx)
+#define __HAL_RCC_TIM22_FORCE_RESET() SET_BIT(RCC->APB2RSTR, (RCC_APB2RSTR_TIM22RST))
+#endif
+#define __HAL_RCC_ADC1_RELEASE_RESET() CLEAR_BIT(RCC->APB2RSTR, (RCC_APB2RSTR_ADC1RST))
+#define __HAL_RCC_SPI1_RELEASE_RESET() CLEAR_BIT(RCC->APB2RSTR, (RCC_APB2RSTR_SPI1RST))
+#define __HAL_RCC_TIM21_RELEASE_RESET() CLEAR_BIT(RCC->APB2RSTR, (RCC_APB2RSTR_TIM21RST))
+#if !defined (STM32L010x4) && !defined (STM32L010x6) && !defined (STM32L010x8) && !defined (STM32L011xx) && !defined (STM32L021xx)
+#define __HAL_RCC_TIM22_RELEASE_RESET() CLEAR_BIT(RCC->APB2RSTR, (RCC_APB2RSTR_TIM22RST))
+#endif
+#endif /* STM32L031xx || STM32L041xx || STM32L011xx || STM32L021xx || */
+ /* STM32L010xB || STM32L010x8 || STM32L010x6 || STM32L010x4 */
+
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_AHB_Clock_Sleep_Enable_Disable AHB Peripheral Clock Sleep Enable Disable
+ * @brief Enable or disable the AHB peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ * @{
+ */
+
+#if !defined(STM32L011xx) && !defined(STM32L021xx) && !defined(STM32L031xx) && !defined(STM32L041xx) && \
+ !defined(STM32L051xx) && !defined(STM32L071xx) && !defined(STM32L081xx) && !defined(STM32L010xB) && \
+ !defined(STM32L010x8) && !defined(STM32L010x6) && !defined(STM32L010x4)
+#define __HAL_RCC_TSC_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHBSMENR, (RCC_AHBSMENR_TSCSMEN))
+#define __HAL_RCC_RNG_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHBSMENR, (RCC_AHBSMENR_RNGSMEN))
+#define __HAL_RCC_TSC_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHBSMENR, (RCC_AHBSMENR_TSCSMEN))
+#define __HAL_RCC_RNG_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHBSMENR, (RCC_AHBSMENR_RNGSMEN))
+
+#define __HAL_RCC_TSC_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHBSMENR, RCC_AHBSMENR_TSCSMEN) != 0U)
+#define __HAL_RCC_RNG_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHBSMENR, RCC_AHBSMENR_RNGSMEN) != 0U)
+#define __HAL_RCC_TSC_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHBSMENR, RCC_AHBSMENR_TSCSMEN) == 0U)
+#define __HAL_RCC_RNG_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHBSMENR, RCC_AHBSMENR_RNGSMEN) == 0U)
+#endif /* !(STM32L011xx) && !(STM32L021xx) && !(STM32L031xx) && !(STM32L041xx) && */
+ /* !(STM32L051xx) && !(STM32L071xx) && !(STM32L081xx) &&!(STM32L010xB) && */
+ /* !(STM32L010x8) && !(STM32L010x6) && !(STM32L010x4) && */
+
+#if defined(STM32L062xx) || defined(STM32L063xx) || defined(STM32L081xx) || defined(STM32L082xx) || defined(STM32L083xx) || defined(STM32L041xx)
+#define __HAL_RCC_AES_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHBLPENR, (RCC_AHBSMENR_CRYPSMEN))
+#define __HAL_RCC_AES_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHBLPENR, (RCC_AHBSMENR_CRYPSMEN))
+
+#define __HAL_RCC_AES_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHBLPENR, RCC_AHBSMENR_CRYPSMEN) != 0U)
+#define __HAL_RCC_AES_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHBLPENR, RCC_AHBSMENR_CRYPSMEN) == 0U)
+#endif /* STM32L062xx || STM32L063xx || STM32L072xx || STM32L073xx || STM32L081xx || STM32L082xx || STM32L083xx || STM32L041xx */
+
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_IOPORT_Clock_Sleep_Enable_Disable IOPORT Peripheral Clock Sleep Enable Disable
+ * @brief Enable or disable the IOPORT peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ * @{
+ */
+#if defined(STM32L073xx) || defined(STM32L083xx) \
+ || defined(STM32L072xx) || defined(STM32L082xx) \
+ || defined(STM32L071xx) || defined(STM32L081xx) \
+ || defined(STM32L010xB)
+#define __HAL_RCC_GPIOE_CLK_SLEEP_ENABLE() SET_BIT(RCC->IOPSMENR, (RCC_IOPSMENR_GPIOESMEN))
+#define __HAL_RCC_GPIOE_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->IOPSMENR,(RCC_IOPSMENR_GPIOESMEN))
+
+#define __HAL_RCC_GPIOE_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->IOPSMENR, RCC_IOPSMENR_GPIOESMEN) != 0U)
+#define __HAL_RCC_GPIOE_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->IOPSMENR, RCC_IOPSMENR_GPIOESMEN) == 0U)
+#endif /* STM32L071xx || STM32L081xx || */
+ /* STM32L072xx || STM32L082xx || */
+ /* STM32L073xx || STM32L083xx || */
+ /* STM32L010xB */
+#if !defined(STM32L010x4) && !defined(STM32L010x6) && !defined(STM32L011xx) && !defined(STM32L021xx) && !defined(STM32L031xx) && !defined(STM32L041xx)
+#define __HAL_RCC_GPIOD_CLK_SLEEP_ENABLE() SET_BIT(RCC->IOPSMENR, (RCC_IOPSMENR_GPIODSMEN))
+#define __HAL_RCC_GPIOD_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->IOPSMENR,(RCC_IOPSMENR_GPIODSMEN))
+
+#define __HAL_RCC_GPIOD_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->IOPSMENR, RCC_IOPSMENR_GPIODSMEN) != 0U)
+#define __HAL_RCC_GPIOD_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->IOPSMENR, RCC_IOPSMENR_GPIODSMEN) == 0U)
+#endif /* !(STM32L010x4) && !(STM32L010x6) && !(STM32L011xx) && !(STM32L021xx) && !(STM32L031xx ) && !(STM32L041xx ) */
+/**
+ * @}
+ */
+
+
+/** @defgroup RCCEx_APB1_Clock_Sleep_Enable_Disable APB1 Peripheral Clock Sleep Enable Disable
+ * @brief Enable or disable the APB1 peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ * @{
+ */
+
+#if defined(STM32L053xx) || defined(STM32L063xx) \
+ || defined(STM32L052xx) || defined(STM32L062xx) \
+ || defined(STM32L051xx)
+#define __HAL_RCC_TIM2_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1SMENR, (RCC_APB1SMENR_TIM2SMEN))
+#define __HAL_RCC_TIM6_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1SMENR, (RCC_APB1SMENR_TIM6SMEN))
+#define __HAL_RCC_SPI2_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1SMENR, (RCC_APB1SMENR_SPI2SMEN))
+#define __HAL_RCC_USART2_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1SMENR, (RCC_APB1SMENR_USART2SMEN))
+#define __HAL_RCC_LPUART1_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1SMENR, (RCC_APB1SMENR_LPUART1SMEN))
+#define __HAL_RCC_I2C1_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1SMENR, (RCC_APB1SMENR_I2C1SMEN))
+#define __HAL_RCC_I2C2_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1SMENR, (RCC_APB1SMENR_I2C2SMEN))
+#define __HAL_RCC_DAC_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1SMENR, (RCC_APB1SMENR_DACSMEN))
+#define __HAL_RCC_LPTIM1_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1SMENR, (RCC_APB1SMENR_LPTIM1SMEN))
+
+#define __HAL_RCC_TIM2_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1SMENR, (RCC_APB1SMENR_TIM2SMEN))
+#define __HAL_RCC_TIM6_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1SMENR, (RCC_APB1SMENR_TIM6SMEN))
+#define __HAL_RCC_SPI2_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1SMENR, (RCC_APB1SMENR_SPI2SMEN))
+#define __HAL_RCC_USART2_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1SMENR, (RCC_APB1SMENR_USART2SMEN))
+#define __HAL_RCC_LPUART1_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1SMENR, (RCC_APB1SMENR_LPUART1SMEN))
+#define __HAL_RCC_I2C1_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1SMENR, (RCC_APB1SMENR_I2C1SMEN))
+#define __HAL_RCC_I2C2_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1SMENR, (RCC_APB1SMENR_I2C2SMEN))
+#define __HAL_RCC_DAC_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1SMENR, (RCC_APB1SMENR_DACSMEN))
+#define __HAL_RCC_LPTIM1_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1SMENR, (RCC_APB1SMENR_LPTIM1SMEN))
+
+#define __HAL_RCC_TIM2_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR, RCC_APB1SMENR_TIM2SMEN) != 0U)
+#define __HAL_RCC_TIM6_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR, RCC_APB1SMENR_TIM6SMEN) != 0U)
+#define __HAL_RCC_SPI2_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR, RCC_APB1SMENR_SPI2SMEN) != 0U)
+#define __HAL_RCC_USART2_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR, RCC_APB1SMENR_USART2SMEN) != 0U)
+#define __HAL_RCC_LPUART1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR, RCC_APB1SMENR_LPUART1SMEN) != 0U)
+#define __HAL_RCC_I2C1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR, RCC_APB1SMENR_I2C1SMEN) != 0U)
+#define __HAL_RCC_I2C2_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR, RCC_APB1SMENR_I2C2SMEN) != 0U)
+#define __HAL_RCC_DAC_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR, RCC_APB1SMENR_DACSMEN) != 0U)
+#define __HAL_RCC_LPTIM1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR, RCC_APB1SMENR_LPTIM1SMEN) != 0U)
+#define __HAL_RCC_TIM2_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR, RCC_APB1SMENR_TIM2SMEN) == 0U)
+#define __HAL_RCC_TIM6_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR, RCC_APB1SMENR_TIM6SMEN) == 0U)
+#define __HAL_RCC_SPI2_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR, RCC_APB1SMENR_SPI2SMEN) == 0U)
+#define __HAL_RCC_USART2_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR, RCC_APB1SMENR_USART2SMEN) == 0U)
+#define __HAL_RCC_LPUART1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR, RCC_APB1SMENR_LPUART1SMEN) == 0U)
+#define __HAL_RCC_I2C1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR, RCC_APB1SMENR_I2C1SMEN) == 0U)
+#define __HAL_RCC_I2C2_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR, RCC_APB1SMENR_I2C2SMEN) == 0U)
+#define __HAL_RCC_DAC_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR, RCC_APB1SMENR_DACSMEN) == 0U)
+#define __HAL_RCC_LPTIM1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR, RCC_APB1SMENR_LPTIM1SMEN) == 0U)
+#endif /* STM32L053xx || STM32L063xx || */
+ /* STM32L052xx || STM32L062xx || */
+ /* STM32L051xx */
+
+#if defined(STM32L073xx) || defined(STM32L083xx) \
+ || defined(STM32L072xx) || defined(STM32L082xx) \
+ || defined(STM32L071xx) || defined(STM32L081xx)
+#define __HAL_RCC_TIM2_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1SMENR, (RCC_APB1SMENR_TIM2SMEN))
+#define __HAL_RCC_TIM3_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1SMENR, (RCC_APB1SMENR_TIM3SMEN))
+#define __HAL_RCC_TIM6_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1SMENR, (RCC_APB1SMENR_TIM6SMEN))
+#define __HAL_RCC_TIM7_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1SMENR, (RCC_APB1SMENR_TIM7SMEN))
+#define __HAL_RCC_SPI2_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1SMENR, (RCC_APB1SMENR_SPI2SMEN))
+#define __HAL_RCC_USART2_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1SMENR, (RCC_APB1SMENR_USART2SMEN))
+#define __HAL_RCC_USART4_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1SMENR, (RCC_APB1SMENR_USART4SMEN))
+#define __HAL_RCC_USART5_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1SMENR, (RCC_APB1SMENR_USART5SMEN))
+#define __HAL_RCC_LPUART1_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1SMENR, (RCC_APB1SMENR_LPUART1SMEN))
+#define __HAL_RCC_I2C1_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1SMENR, (RCC_APB1SMENR_I2C1SMEN))
+#define __HAL_RCC_I2C2_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1SMENR, (RCC_APB1SMENR_I2C2SMEN))
+#define __HAL_RCC_I2C3_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1SMENR, (RCC_APB1SMENR_I2C3SMEN))
+#define __HAL_RCC_DAC_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1SMENR, (RCC_APB1SMENR_DACSMEN))
+#define __HAL_RCC_LPTIM1_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1SMENR, (RCC_APB1SMENR_LPTIM1SMEN))
+
+#define __HAL_RCC_TIM2_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1SMENR, (RCC_APB1SMENR_TIM2SMEN))
+#define __HAL_RCC_TIM3_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1SMENR, (RCC_APB1SMENR_TIM3SMEN))
+#define __HAL_RCC_TIM6_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1SMENR, (RCC_APB1SMENR_TIM6SMEN))
+#define __HAL_RCC_TIM7_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1SMENR, (RCC_APB1SMENR_TIM7SMEN))
+#define __HAL_RCC_SPI2_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1SMENR, (RCC_APB1SMENR_SPI2SMEN))
+#define __HAL_RCC_USART2_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1SMENR, (RCC_APB1SMENR_USART2SMEN))
+#define __HAL_RCC_USART4_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1SMENR, (RCC_APB1SMENR_USART4SMEN))
+#define __HAL_RCC_USART5_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1SMENR, (RCC_APB1SMENR_USART5SMEN))
+#define __HAL_RCC_LPUART1_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1SMENR, (RCC_APB1SMENR_LPUART1SMEN))
+#define __HAL_RCC_I2C1_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1SMENR, (RCC_APB1SMENR_I2C1SMEN))
+#define __HAL_RCC_I2C2_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1SMENR, (RCC_APB1SMENR_I2C2SMEN))
+#define __HAL_RCC_I2C3_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1SMENR, (RCC_APB1SMENR_I2C3SMEN))
+#define __HAL_RCC_DAC_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1SMENR, (RCC_APB1SMENR_DACSMEN))
+#define __HAL_RCC_LPTIM1_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1SMENR, (RCC_APB1SMENR_LPTIM1SMEN))
+
+#define __HAL_RCC_TIM2_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR, RCC_APB1SMENR_TIM2SMEN) != 0U)
+#define __HAL_RCC_TIM3_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR, RCC_APB1SMENR_TIM3SMEN) != 0U)
+#define __HAL_RCC_TIM6_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR, RCC_APB1SMENR_TIM6SMEN) != 0U)
+#define __HAL_RCC_TIM7_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR, RCC_APB1SMENR_TIM7SMEN) != 0U)
+#define __HAL_RCC_SPI2_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR, RCC_APB1SMENR_SPI2SMEN) != 0U)
+#define __HAL_RCC_USART2_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR, RCC_APB1SMENR_USART2SMEN) != 0U)
+#define __HAL_RCC_USART4_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR, RCC_APB1SMENR_USART4SMEN) != 0U)
+#define __HAL_RCC_USART5_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR, RCC_APB1SMENR_USART5SMEN) != 0U)
+#define __HAL_RCC_LPUART1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR, RCC_APB1SMENR_LPUART1SMEN) != 0U)
+#define __HAL_RCC_I2C1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR, RCC_APB1SMENR_I2C1SMEN) != 0U)
+#define __HAL_RCC_I2C2_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR, RCC_APB1SMENR_I2C2SMEN) != 0U)
+#define __HAL_RCC_I2C3_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR, RCC_APB1SMENR_I2C3SMEN) != 0U)
+#define __HAL_RCC_DAC_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR, RCC_APB1SMENR_DACSMEN) != 0U)
+#define __HAL_RCC_LPTIM1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR, RCC_APB1SMENR_LPTIM1SMEN) != 0U)
+#define __HAL_RCC_TIM2_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR, RCC_APB1SMENR_TIM2SMEN) == 0U)
+#define __HAL_RCC_TIM3_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR, RCC_APB1SMENR_TIM3SMEN) == 0U)
+#define __HAL_RCC_TIM6_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR, RCC_APB1SMENR_TIM6SMEN) == 0U)
+#define __HAL_RCC_TIM7_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR, RCC_APB1SMENR_TIM7SMEN) == 0U)
+#define __HAL_RCC_SPI2_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR, RCC_APB1SMENR_SPI2SMEN) == 0U)
+#define __HAL_RCC_USART2_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR, RCC_APB1SMENR_USART2SMEN) == 0U)
+#define __HAL_RCC_USART4_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR, RCC_APB1SMENR_USART4SMEN) == 0U)
+#define __HAL_RCC_USART5_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR, RCC_APB1SMENR_USART5SMEN) == 0U)
+#define __HAL_RCC_LPUART1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR, RCC_APB1SMENR_LPUART1SMEN) == 0U)
+#define __HAL_RCC_I2C1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR, RCC_APB1SMENR_I2C1SMEN) == 0U)
+#define __HAL_RCC_I2C2_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR, RCC_APB1SMENR_I2C2SMEN) == 0U)
+#define __HAL_RCC_I2C3_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR, RCC_APB1SMENR_I2C3SMEN) == 0U)
+#define __HAL_RCC_DAC_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR, RCC_APB1SMENR_DACSMEN) == 0U)
+#define __HAL_RCC_LPTIM1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR, RCC_APB1SMENR_LPTIM1SMEN) == 0U)
+#endif /* STM32L071xx || STM32L081xx || */
+ /* STM32L072xx || STM32L082xx || */
+ /* STM32L073xx || STM32L083xx */
+
+#if defined(STM32L011xx) || defined(STM32L021xx) || defined(STM32L031xx) || defined(STM32L041xx) || \
+ defined(STM32L010xB) || defined(STM32L010x8) || defined(STM32L010x6) || defined(STM32L010x4)
+#define __HAL_RCC_TIM2_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1SMENR, (RCC_APB1SMENR_TIM2SMEN))
+#define __HAL_RCC_USART2_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1SMENR, (RCC_APB1SMENR_USART2SMEN))
+#define __HAL_RCC_LPUART1_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1SMENR, (RCC_APB1SMENR_LPUART1SMEN))
+#define __HAL_RCC_I2C1_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1SMENR, (RCC_APB1SMENR_I2C1SMEN))
+#define __HAL_RCC_LPTIM1_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1SMENR, (RCC_APB1SMENR_LPTIM1SMEN))
+
+#define __HAL_RCC_TIM2_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1SMENR, (RCC_APB1SMENR_TIM2SMEN))
+#define __HAL_RCC_USART2_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1SMENR, (RCC_APB1SMENR_USART2SMEN))
+#define __HAL_RCC_LPUART1_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1SMENR, (RCC_APB1SMENR_LPUART1SMEN))
+#define __HAL_RCC_I2C1_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1SMENR, (RCC_APB1SMENR_I2C1SMEN))
+#define __HAL_RCC_LPTIM1_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1SMENR, (RCC_APB1SMENR_LPTIM1SMEN))
+
+#define __HAL_RCC_TIM2_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR, RCC_APB1SMENR_TIM2SMEN) != 0U)
+#define __HAL_RCC_USART2_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR, RCC_APB1SMENR_USART2SMEN) != 0U)
+#define __HAL_RCC_LPUART1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR, RCC_APB1SMENR_LPUART1SMEN) != 0U)
+#define __HAL_RCC_I2C1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR, RCC_APB1SMENR_I2C1SMEN) != 0U)
+#define __HAL_RCC_LPTIM1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR, RCC_APB1SMENR_LPTIM1SMEN) != 0U)
+#define __HAL_RCC_TIM2_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR, RCC_APB1SMENR_TIM2SMEN) == 0U)
+#define __HAL_RCC_USART2_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR, RCC_APB1SMENR_USART2SMEN) == 0U)
+#define __HAL_RCC_LPUART1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR, RCC_APB1SMENR_LPUART1SMEN) == 0U)
+#define __HAL_RCC_I2C1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR, RCC_APB1SMENR_I2C1SMEN) == 0U)
+#define __HAL_RCC_LPTIM1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR, RCC_APB1SMENR_LPTIM1SMEN) == 0U)
+
+#endif /* STM32L031xx || STM32L041xx || STM32L011xx || STM32L021xx */
+ /* STM32L010xB || STM32L010x8 || STM32L010x6 || STM32L010x4 */
+
+#if !defined(STM32L011xx) && !defined(STM32L021xx) && !defined(STM32L031xx) && !defined(STM32L041xx) && \
+ !defined(STM32L051xx) && !defined(STM32L071xx) && !defined(STM32L081xx) && \
+ !defined(STM32L010xB) && !defined(STM32L010x8) && !defined(STM32L010x6) && !defined(STM32L010x4)
+#define __HAL_RCC_USB_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1SMENR, (RCC_APB1SMENR_USBSMEN))
+#define __HAL_RCC_USB_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1SMENR, (RCC_APB1SMENR_USBSMEN))
+#define __HAL_RCC_CRS_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1SMENR, (RCC_APB1SMENR_CRSSMEN))
+#define __HAL_RCC_CRS_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1SMENR, (RCC_APB1SMENR_CRSSMEN))
+
+#define __HAL_RCC_USB_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR, RCC_APB1SMENR_USBSMEN) != 0U)
+#define __HAL_RCC_USB_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR, RCC_APB1SMENR_USBSMEN) == 0U)
+#define __HAL_RCC_CRS_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR, RCC_APB1SMENR_CRSSMEN) != 0U)
+#define __HAL_RCC_CRS_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR, RCC_APB1SMENR_CRSSMEN) == 0U)
+#endif /* !(STM32L011xx) && !(STM32L021xx) && !(STM32L031xx) && !(STM32L041xx) && */
+ /* !(STM32L051xx) && !(STM32L071xx) && !(STM32L081xx) && !(STM32L010xB) && */
+ /* !(STM32L010x8) && !(STM32L010x6) && !(STM32L010x4) */
+
+#if defined(STM32L053xx) || defined(STM32L063xx) || defined(STM32L073xx) || defined(STM32L083xx)
+#define __HAL_RCC_LCD_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1SMENR, (RCC_APB1SMENR_LCDSMEN))
+#define __HAL_RCC_LCD_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1SMENR, (RCC_APB1SMENR_LCDSMEN))
+
+#define __HAL_RCC_LCD_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR, RCC_APB1SMENR_LCDSMEN) != 0U)
+#define __HAL_RCC_LCD_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR, RCC_APB1SMENR_LCDSMEN) == 0U)
+#endif /* STM32L053xx || STM32L063xx || STM32L073xx || STM32L083xx */
+
+/**
+ * @}
+ */
+
+#if defined(STM32L053xx) || defined(STM32L063xx) || defined(STM32L073xx) || defined(STM32L083xx) \
+ || defined(STM32L052xx) || defined(STM32L062xx) || defined(STM32L072xx) || defined(STM32L082xx) \
+ || defined(STM32L051xx) || defined(STM32L071xx) || defined(STM32L081xx) || defined(STM32L031xx) \
+ || defined(STM32L041xx) || defined(STM32L011xx) || defined(STM32L021xx) || defined(STM32L010xB) \
+ || defined(STM32L010x8) || defined(STM32L010x6) || defined(STM32L010x4)
+
+/** @defgroup RCCEx_APB2_Clock_Sleep_Enable_Disable APB2 Peripheral Clock Sleep Enable Disable
+ * @brief Enable or disable the APB2 peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ * @{
+ */
+#define __HAL_RCC_TIM21_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB2SMENR, (RCC_APB2SMENR_TIM21SMEN))
+#if !defined (STM32L010x4) && !defined (STM32L010x6) && !defined (STM32L010x8) && !defined (STM32L011xx) && !defined (STM32L021xx)
+#define __HAL_RCC_TIM22_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB2SMENR, (RCC_APB2SMENR_TIM22SMEN))
+#endif
+#define __HAL_RCC_ADC1_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB2SMENR, (RCC_APB2SMENR_ADC1SMEN))
+#define __HAL_RCC_SPI1_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB2SMENR, (RCC_APB2SMENR_SPI1SMEN))
+#define __HAL_RCC_USART1_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB2SMENR, (RCC_APB2SMENR_USART1SMEN))
+
+#define __HAL_RCC_TIM21_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB2SMENR, (RCC_APB2SMENR_TIM21SMEN))
+#if !defined (STM32L010x4) && !defined (STM32L010x6) && !defined (STM32L010x8) && !defined (STM32L011xx) && !defined (STM32L021xx)
+#define __HAL_RCC_TIM22_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB2SMENR, (RCC_APB2SMENR_TIM22SMEN))
+#endif
+#define __HAL_RCC_ADC1_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB2SMENR, (RCC_APB2SMENR_ADC1SMEN))
+#define __HAL_RCC_SPI1_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB2SMENR, (RCC_APB2SMENR_SPI1SMEN))
+#define __HAL_RCC_USART1_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB2SMENR, (RCC_APB2SMENR_USART1SMEN))
+
+#define __HAL_RCC_TIM21_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_TIM21SMEN) != 0U)
+#if !defined (STM32L010x4) && !defined (STM32L010x6) && !defined (STM32L010x8) && !defined (STM32L011xx) && !defined (STM32L021xx)
+#define __HAL_RCC_TIM22_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_TIM22SMEN) != 0U)
+#endif
+#define __HAL_RCC_ADC1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_ADC1SMEN) != 0U)
+#define __HAL_RCC_SPI1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_SPI1SMEN) != 0U)
+#define __HAL_RCC_USART1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_USART1SMEN) != 0U)
+
+#define __HAL_RCC_TIM21_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB2SMENR, (RCC_APB2SMENR_TIM21SMEN) == 0U)
+#if !defined (STM32L010x4) && !defined (STM32L010x6) && !defined (STM32L010x8) && !defined (STM32L011xx) && !defined (STM32L021xx)
+#define __HAL_RCC_TIM22_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB2SMENR, (RCC_APB2SMENR_TIM22SMEN) == 0U)
+#endif
+#define __HAL_RCC_ADC1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB2SMENR, (RCC_APB2SMENR_ADC1SMEN) == 0U)
+#define __HAL_RCC_SPI1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB2SMENR, (RCC_APB2SMENR_SPI1SMEN) == 0U)
+#define __HAL_RCC_USART1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB2SMENR, (RCC_APB2SMENR_USART1SMEN) == 0U)
+
+/**
+ * @}
+ */
+
+#endif /* STM32L053xx || STM32L063xx || STM32L073xx || STM32L083xx || */
+ /* STM32L052xx || STM32L062xx || STM32L072xx || STM32L082xx || */
+ /* STM32L051xx || STM32L071xx || STM32L081xx || STM32L031xx || */
+ /* STM32L041xx || STM32L011xx || STM32L021xx || STM32L010xB || */
+ /* STM32L010x8 || STM32L010x6 || STM32L010x4 */
+
+
+/**
+ * @brief Enable interrupt on RCC LSE CSS EXTI Line 19.
+ * @retval None
+ */
+#define __HAL_RCC_LSECSS_EXTI_ENABLE_IT() SET_BIT(EXTI->IMR, RCC_EXTI_LINE_LSECSS)
+
+/**
+ * @brief Disable interrupt on RCC LSE CSS EXTI Line 19.
+ * @retval None
+ */
+#define __HAL_RCC_LSECSS_EXTI_DISABLE_IT() CLEAR_BIT(EXTI->IMR, RCC_EXTI_LINE_LSECSS)
+
+/**
+ * @brief Enable event on RCC LSE CSS EXTI Line 19.
+ * @retval None.
+ */
+#define __HAL_RCC_LSECSS_EXTI_ENABLE_EVENT() SET_BIT(EXTI->EMR, RCC_EXTI_LINE_LSECSS)
+
+/**
+ * @brief Disable event on RCC LSE CSS EXTI Line 19.
+ * @retval None.
+ */
+#define __HAL_RCC_LSECSS_EXTI_DISABLE_EVENT() CLEAR_BIT(EXTI->EMR, RCC_EXTI_LINE_LSECSS)
+
+
+/**
+ * @brief RCC LSE CSS EXTI line configuration: set falling edge trigger.
+ * @retval None.
+ */
+#define __HAL_RCC_LSECSS_EXTI_ENABLE_FALLING_EDGE() SET_BIT(EXTI->FTSR, RCC_EXTI_LINE_LSECSS)
+
+
+/**
+ * @brief Disable the RCC LSE CSS Extended Interrupt Falling Trigger.
+ * @retval None.
+ */
+#define __HAL_RCC_LSECSS_EXTI_DISABLE_FALLING_EDGE() CLEAR_BIT(EXTI->FTSR, RCC_EXTI_LINE_LSECSS)
+
+
+/**
+ * @brief RCC LSE CSS EXTI line configuration: set rising edge trigger.
+ * @retval None.
+ */
+#define __HAL_RCC_LSECSS_EXTI_ENABLE_RISING_EDGE() SET_BIT(EXTI->RTSR, RCC_EXTI_LINE_LSECSS)
+
+/**
+ * @brief Disable the RCC LSE CSS Extended Interrupt Rising Trigger.
+ * @retval None.
+ */
+#define __HAL_RCC_LSECSS_EXTI_DISABLE_RISING_EDGE() CLEAR_BIT(EXTI->RTSR, RCC_EXTI_LINE_LSECSS)
+
+/**
+ * @brief RCC LSE CSS EXTI line configuration: set rising & falling edge trigger.
+ * @retval None.
+ */
+#define __HAL_RCC_LSECSS_EXTI_ENABLE_RISING_FALLING_EDGE() \
+ do { \
+ __HAL_RCC_LSECSS_EXTI_ENABLE_RISING_EDGE(); \
+ __HAL_RCC_LSECSS_EXTI_ENABLE_FALLING_EDGE(); \
+ } while(0)
+
+/**
+ * @brief Disable the RCC LSE CSS Extended Interrupt Rising & Falling Trigger.
+ * @retval None.
+ */
+#define __HAL_RCC_LSECSS_EXTI_DISABLE_RISING_FALLING_EDGE() \
+ do { \
+ __HAL_RCC_LSECSS_EXTI_DISABLE_RISING_EDGE(); \
+ __HAL_RCC_LSECSS_EXTI_DISABLE_FALLING_EDGE(); \
+ } while(0)
+
+/**
+ * @brief Check whether the specified RCC LSE CSS EXTI interrupt flag is set or not.
+ * @retval EXTI RCC LSE CSS Line Status.
+ */
+#define __HAL_RCC_LSECSS_EXTI_GET_FLAG() (EXTI->PR & (RCC_EXTI_LINE_LSECSS))
+
+/**
+ * @brief Clear the RCC LSE CSS EXTI flag.
+ * @retval None.
+ */
+#define __HAL_RCC_LSECSS_EXTI_CLEAR_FLAG() (EXTI->PR = (RCC_EXTI_LINE_LSECSS))
+
+/**
+ * @brief Generate a Software interrupt on selected EXTI line.
+ * @retval None.
+ */
+#define __HAL_RCC_LSECSS_EXTI_GENERATE_SWIT() SET_BIT(EXTI->SWIER, RCC_EXTI_LINE_LSECSS)
+
+
+#if defined(LCD)
+
+/** @defgroup RCCEx_LCD_Configuration LCD Configuration
+ * @brief Macros to configure clock source of LCD peripherals.
+ * @{
+ */
+
+/** @brief Macro to configures LCD clock (LCDCLK).
+ * @note LCD and RTC use the same configuration
+ * @note LCD can however be used in the Stop low power mode if the LSE or LSI is used as the
+ * LCD clock source.
+ *
+ * @param __LCD_CLKSOURCE__ specifies the LCD clock source.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_RTCCLKSOURCE_LSE LSE selected as LCD clock
+ * @arg @ref RCC_RTCCLKSOURCE_LSI LSI selected as LCD clock
+ * @arg @ref RCC_RTCCLKSOURCE_HSE_DIV2 HSE divided by 2 selected as LCD clock
+ * @arg @ref RCC_RTCCLKSOURCE_HSE_DIV4 HSE divided by 4 selected as LCD clock
+ * @arg @ref RCC_RTCCLKSOURCE_HSE_DIV8 HSE divided by 8 selected as LCD clock
+ * @arg @ref RCC_RTCCLKSOURCE_HSE_DIV16 HSE divided by 16 selected as LCD clock
+ */
+#define __HAL_RCC_LCD_CONFIG(__LCD_CLKSOURCE__) __HAL_RCC_RTC_CONFIG(__LCD_CLKSOURCE__)
+
+/** @brief Macro to get the LCD clock source.
+ */
+#define __HAL_RCC_GET_LCD_SOURCE() __HAL_RCC_GET_RTC_SOURCE()
+
+/** @brief Macro to get the LCD clock pre-scaler.
+ */
+#define __HAL_RCC_GET_LCD_HSE_PRESCALER() __HAL_RCC_GET_RTC_HSE_PRESCALER()
+
+/**
+ * @}
+ */
+
+#endif /* LCD */
+
+/** @brief Macro to configure the I2C1 clock (I2C1CLK).
+ *
+ * @param __I2C1_CLKSOURCE__ specifies the I2C1 clock source.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_I2C1CLKSOURCE_PCLK1 PCLK1 selected as I2C1 clock
+ * @arg @ref RCC_I2C1CLKSOURCE_HSI HSI selected as I2C1 clock
+ * @arg @ref RCC_I2C1CLKSOURCE_SYSCLK System Clock selected as I2C1 clock
+ */
+#define __HAL_RCC_I2C1_CONFIG(__I2C1_CLKSOURCE__) \
+ MODIFY_REG(RCC->CCIPR, RCC_CCIPR_I2C1SEL, (uint32_t)(__I2C1_CLKSOURCE__))
+
+/** @brief Macro to get the I2C1 clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg @ref RCC_I2C1CLKSOURCE_PCLK1 PCLK1 selected as I2C1 clock
+ * @arg @ref RCC_I2C1CLKSOURCE_HSI HSI selected as I2C1 clock
+ * @arg @ref RCC_I2C1CLKSOURCE_SYSCLK System Clock selected as I2C1 clock
+ */
+#define __HAL_RCC_GET_I2C1_SOURCE() ((uint32_t)(READ_BIT(RCC->CCIPR, RCC_CCIPR_I2C1SEL)))
+
+#if defined(RCC_CCIPR_I2C3SEL)
+/** @brief Macro to configure the I2C3 clock (I2C3CLK).
+ *
+ * @param __I2C3_CLKSOURCE__ specifies the I2C3 clock source.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_I2C3CLKSOURCE_PCLK1 PCLK1 selected as I2C3 clock
+ * @arg @ref RCC_I2C3CLKSOURCE_HSI HSI selected as I2C3 clock
+ * @arg @ref RCC_I2C3CLKSOURCE_SYSCLK System Clock selected as I2C3 clock
+ */
+#define __HAL_RCC_I2C3_CONFIG(__I2C3_CLKSOURCE__) \
+ MODIFY_REG(RCC->CCIPR, RCC_CCIPR_I2C3SEL, (uint32_t)(__I2C3_CLKSOURCE__))
+
+/** @brief Macro to get the I2C3 clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg @ref RCC_I2C3CLKSOURCE_PCLK1 PCLK1 selected as I2C3 clock
+ * @arg @ref RCC_I2C3CLKSOURCE_HSI HSI selected as I2C3 clock
+ * @arg @ref RCC_I2C3CLKSOURCE_SYSCLK System Clock selected as I2C3 clock
+ */
+#define __HAL_RCC_GET_I2C3_SOURCE() ((uint32_t)(READ_BIT(RCC->CCIPR, RCC_CCIPR_I2C3SEL)))
+
+#endif /* RCC_CCIPR_I2C3SEL */
+
+#if defined (RCC_CCIPR_USART1SEL)
+/** @brief Macro to configure the USART1 clock (USART1CLK).
+ *
+ * @param __USART1_CLKSOURCE__ specifies the USART1 clock source.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_USART1CLKSOURCE_PCLK2 PCLK2 selected as USART1 clock
+ * @arg @ref RCC_USART1CLKSOURCE_HSI HSI selected as USART1 clock
+ * @arg @ref RCC_USART1CLKSOURCE_SYSCLK System Clock selected as USART1 clock
+ * @arg @ref RCC_USART1CLKSOURCE_LSE LSE selected as USART1 clock
+ */
+#define __HAL_RCC_USART1_CONFIG(__USART1_CLKSOURCE__) \
+ MODIFY_REG(RCC->CCIPR, RCC_CCIPR_USART1SEL, (uint32_t)(__USART1_CLKSOURCE__))
+
+/** @brief Macro to get the USART1 clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg @ref RCC_USART1CLKSOURCE_PCLK2 PCLK2 selected as USART1 clock
+ * @arg @ref RCC_USART1CLKSOURCE_HSI HSI selected as USART1 clock
+ * @arg @ref RCC_USART1CLKSOURCE_SYSCLK System Clock selected as USART1 clock
+ * @arg @ref RCC_USART1CLKSOURCE_LSE LSE selected as USART1 clock
+ */
+#define __HAL_RCC_GET_USART1_SOURCE() ((uint32_t)(READ_BIT(RCC->CCIPR, RCC_CCIPR_USART1SEL)))
+#endif /* RCC_CCIPR_USART1SEL */
+
+/** @brief Macro to configure the USART2 clock (USART2CLK).
+ *
+ * @param __USART2_CLKSOURCE__ specifies the USART2 clock source.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_USART2CLKSOURCE_PCLK1 PCLK1 selected as USART2 clock
+ * @arg @ref RCC_USART2CLKSOURCE_HSI HSI selected as USART2 clock
+ * @arg @ref RCC_USART2CLKSOURCE_SYSCLK System Clock selected as USART2 clock
+ * @arg @ref RCC_USART2CLKSOURCE_LSE LSE selected as USART2 clock
+ */
+#define __HAL_RCC_USART2_CONFIG(__USART2_CLKSOURCE__) \
+ MODIFY_REG(RCC->CCIPR, RCC_CCIPR_USART2SEL, (uint32_t)(__USART2_CLKSOURCE__))
+
+/** @brief Macro to get the USART2 clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg @ref RCC_USART2CLKSOURCE_PCLK1 PCLK1 selected as USART2 clock
+ * @arg @ref RCC_USART2CLKSOURCE_HSI HSI selected as USART2 clock
+ * @arg @ref RCC_USART2CLKSOURCE_SYSCLK System Clock selected as USART2 clock
+ * @arg @ref RCC_USART2CLKSOURCE_LSE LSE selected as USART2 clock
+ */
+#define __HAL_RCC_GET_USART2_SOURCE() ((uint32_t)(READ_BIT(RCC->CCIPR, RCC_CCIPR_USART2SEL)))
+
+/** @brief Macro to configure the LPUART1 clock (LPUART1CLK).
+ *
+ * @param __LPUART1_CLKSOURCE__ specifies the LPUART1 clock source.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_LPUART1CLKSOURCE_PCLK1 PCLK1 selected as LPUART1 clock
+ * @arg @ref RCC_LPUART1CLKSOURCE_HSI HSI selected as LPUART1 clock
+ * @arg @ref RCC_LPUART1CLKSOURCE_SYSCLK System Clock selected as LPUART1 clock
+ * @arg @ref RCC_LPUART1CLKSOURCE_LSE LSE selected as LPUART1 clock
+ */
+#define __HAL_RCC_LPUART1_CONFIG(__LPUART1_CLKSOURCE__) \
+ MODIFY_REG(RCC->CCIPR, RCC_CCIPR_LPUART1SEL, (uint32_t)(__LPUART1_CLKSOURCE__))
+
+/** @brief Macro to get the LPUART1 clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg @ref RCC_LPUART1CLKSOURCE_PCLK1 PCLK1 selected as LPUART1 clock
+ * @arg @ref RCC_LPUART1CLKSOURCE_HSI HSI selected as LPUART1 clock
+ * @arg @ref RCC_LPUART1CLKSOURCE_SYSCLK System Clock selected as LPUART1 clock
+ * @arg @ref RCC_LPUART1CLKSOURCE_LSE LSE selected as LPUART1 clock
+ */
+#define __HAL_RCC_GET_LPUART1_SOURCE() ((uint32_t)(READ_BIT(RCC->CCIPR, RCC_CCIPR_LPUART1SEL)))
+
+/** @brief Macro to configure the LPTIM1 clock (LPTIM1CLK).
+ *
+ * @param __LPTIM1_CLKSOURCE__ specifies the LPTIM1 clock source.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_LPTIM1CLKSOURCE_PCLK1 PCLK1 selected as LPTIM1 clock
+ * @arg @ref RCC_LPTIM1CLKSOURCE_LSI HSI selected as LPTIM1 clock
+ * @arg @ref RCC_LPTIM1CLKSOURCE_HSI LSI selected as LPTIM1 clock
+ * @arg @ref RCC_LPTIM1CLKSOURCE_LSE LSE selected as LPTIM1 clock
+ */
+#define __HAL_RCC_LPTIM1_CONFIG(__LPTIM1_CLKSOURCE__) \
+ MODIFY_REG(RCC->CCIPR, RCC_CCIPR_LPTIM1SEL, (uint32_t)(__LPTIM1_CLKSOURCE__))
+
+/** @brief Macro to get the LPTIM1 clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg @ref RCC_LPTIM1CLKSOURCE_PCLK1 PCLK1 selected as LPUART1 clock
+ * @arg @ref RCC_LPTIM1CLKSOURCE_LSI HSI selected as LPUART1 clock
+ * @arg @ref RCC_LPTIM1CLKSOURCE_HSI System Clock selected as LPUART1 clock
+ * @arg @ref RCC_LPTIM1CLKSOURCE_LSE LSE selected as LPUART1 clock
+ */
+#define __HAL_RCC_GET_LPTIM1_SOURCE() ((uint32_t)(READ_BIT(RCC->CCIPR, RCC_CCIPR_LPTIM1SEL)))
+
+#if defined(USB)
+/** @brief Macro to configure the USB clock (USBCLK).
+ * @param __USB_CLKSOURCE__ specifies the USB clock source.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_USBCLKSOURCE_HSI48 HSI48 selected as USB clock
+ * @arg @ref RCC_USBCLKSOURCE_PLL PLL Clock selected as USB clock
+ */
+#define __HAL_RCC_USB_CONFIG(__USB_CLKSOURCE__) \
+ MODIFY_REG(RCC->CCIPR, RCC_CCIPR_HSI48SEL, (uint32_t)(__USB_CLKSOURCE__))
+
+/** @brief Macro to get the USB clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg @ref RCC_USBCLKSOURCE_HSI48 HSI48 selected as USB clock
+ * @arg @ref RCC_USBCLKSOURCE_PLL PLL Clock selected as USB clock
+ */
+#define __HAL_RCC_GET_USB_SOURCE() ((uint32_t)(READ_BIT(RCC->CCIPR, RCC_CCIPR_HSI48SEL)))
+#endif /* USB */
+
+#if defined(RNG)
+/** @brief Macro to configure the RNG clock (RNGCLK).
+ * @param __RNG_CLKSOURCE__ specifies the USB clock source.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_RNGCLKSOURCE_HSI48 HSI48 selected as RNG clock
+ * @arg @ref RCC_RNGCLKSOURCE_PLLCLK PLL Clock selected as RNG clock
+ */
+#define __HAL_RCC_RNG_CONFIG(__RNG_CLKSOURCE__) \
+ MODIFY_REG(RCC->CCIPR, RCC_CCIPR_HSI48SEL, (uint32_t)(__RNG_CLKSOURCE__))
+
+/** @brief Macro to get the RNG clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg @ref RCC_RNGCLKSOURCE_HSI48 HSI48 selected as RNG clock
+ * @arg @ref RCC_RNGCLKSOURCE_PLLCLK PLL Clock selected as RNG clock
+ */
+#define __HAL_RCC_GET_RNG_SOURCE() ((uint32_t)(READ_BIT(RCC->CCIPR, RCC_CCIPR_HSI48SEL)))
+#endif /* RNG */
+
+#if defined(RCC_CCIPR_HSI48SEL)
+/** @brief Macro to select the HSI48M clock source
+ * @note This macro can be replaced by either __HAL_RCC_RNG_CONFIG or
+ * __HAL_RCC_USB_CONFIG to configure respectively RNG or UBS clock sources.
+ *
+ * @param __HSI48M_CLKSOURCE__ specifies the HSI48M clock source dedicated for
+ * USB an RNG peripherals.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_HSI48M_PLL A dedicated 48MHZ PLL output.
+ * @arg @ref RCC_HSI48M_HSI48 48MHZ issued from internal HSI48 oscillator.
+ */
+#define __HAL_RCC_HSI48M_CONFIG(__HSI48M_CLKSOURCE__) \
+ MODIFY_REG(RCC->CCIPR, RCC_CCIPR_HSI48SEL, (uint32_t)(__HSI48M_CLKSOURCE__))
+
+/** @brief Macro to get the HSI48M clock source.
+ * @note This macro can be replaced by either __HAL_RCC_GET_RNG_SOURCE or
+ * __HAL_RCC_GET_USB_SOURCE to get respectively RNG or UBS clock sources.
+ * @retval The clock source can be one of the following values:
+ * @arg @ref RCC_HSI48M_PLL A dedicated 48MHZ PLL output.
+ * @arg @ref RCC_HSI48M_HSI48 48MHZ issued from internal HSI48 oscillator.
+ */
+#define __HAL_RCC_GET_HSI48M_SOURCE() ((uint32_t)(READ_BIT(RCC->CCIPR, RCC_CCIPR_HSI48SEL)))
+#endif /* RCC_CCIPR_HSI48SEL */
+
+/**
+ * @brief Macro to enable the force of the Internal High Speed oscillator (HSI)
+ * in STOP mode to be quickly available as kernel clock for USART and I2C.
+ * @note The Enable of this function has not effect on the HSION bit.
+ */
+#define __HAL_RCC_HSISTOP_ENABLE() SET_BIT(RCC->CR, RCC_CR_HSIKERON)
+
+/**
+ * @brief Macro to disable the force of the Internal High Speed oscillator (HSI)
+ * in STOP mode to be quickly available as kernel clock for USART and I2C.
+ * @retval None
+ */
+#define __HAL_RCC_HSISTOP_DISABLE() CLEAR_BIT(RCC->CR, RCC_CR_HSIKERON)
+
+/**
+ * @brief Macro to configures the External Low Speed oscillator (LSE) drive capability.
+ * @param __RCC_LSEDRIVE__ specifies the new state of the LSE drive capability.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_LSEDRIVE_LOW LSE oscillator low drive capability.
+ * @arg @ref RCC_LSEDRIVE_MEDIUMLOW LSE oscillator medium low drive capability.
+ * @arg @ref RCC_LSEDRIVE_MEDIUMHIGH LSE oscillator medium high drive capability.
+ * @arg @ref RCC_LSEDRIVE_HIGH LSE oscillator high drive capability.
+ * @retval None
+ */
+#define __HAL_RCC_LSEDRIVE_CONFIG(__RCC_LSEDRIVE__) (MODIFY_REG(RCC->CSR,\
+ RCC_CSR_LSEDRV, (uint32_t)(__RCC_LSEDRIVE__) ))
+
+/**
+ * @brief Macro to configures the wake up from stop clock.
+ * @param __RCC_STOPWUCLK__ specifies the clock source used after wake up from stop
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_STOP_WAKEUPCLOCK_MSI MSI selected as system clock source
+ * @arg @ref RCC_STOP_WAKEUPCLOCK_HSI HSI selected as system clock source
+ * @retval None
+ */
+#define __HAL_RCC_WAKEUPSTOP_CLK_CONFIG(__RCC_STOPWUCLK__) (MODIFY_REG(RCC->CFGR,\
+ RCC_CFGR_STOPWUCK, (uint32_t)(__RCC_STOPWUCLK__) ))
+
+#if defined(CRS)
+/**
+ * @brief Enables the specified CRS interrupts.
+ * @param __INTERRUPT__ specifies the CRS interrupt sources to be enabled.
+ * This parameter can be any combination of the following values:
+ * @arg @ref RCC_CRS_IT_SYNCOK
+ * @arg @ref RCC_CRS_IT_SYNCWARN
+ * @arg @ref RCC_CRS_IT_ERR
+ * @arg @ref RCC_CRS_IT_ESYNC
+ * @retval None
+ */
+#define __HAL_RCC_CRS_ENABLE_IT(__INTERRUPT__) SET_BIT(CRS->CR, (__INTERRUPT__))
+
+/**
+ * @brief Disables the specified CRS interrupts.
+ * @param __INTERRUPT__ specifies the CRS interrupt sources to be disabled.
+ * This parameter can be any combination of the following values:
+ * @arg @ref RCC_CRS_IT_SYNCOK
+ * @arg @ref RCC_CRS_IT_SYNCWARN
+ * @arg @ref RCC_CRS_IT_ERR
+ * @arg @ref RCC_CRS_IT_ESYNC
+ * @retval None
+ */
+#define __HAL_RCC_CRS_DISABLE_IT(__INTERRUPT__) CLEAR_BIT(CRS->CR,(__INTERRUPT__))
+
+/** @brief Check the CRS interrupt has occurred or not.
+ * @param __INTERRUPT__ specifies the CRS interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_CRS_IT_SYNCOK
+ * @arg @ref RCC_CRS_IT_SYNCWARN
+ * @arg @ref RCC_CRS_IT_ERR
+ * @arg @ref RCC_CRS_IT_ESYNC
+ * @retval The new state of __INTERRUPT__ (SET or RESET).
+ */
+#define __HAL_RCC_CRS_GET_IT_SOURCE(__INTERRUPT__) ((CRS->CR & (__INTERRUPT__))? SET : RESET)
+
+/** @brief Clear the CRS interrupt pending bits
+ * bits to clear the selected interrupt pending bits.
+ * @param __INTERRUPT__ specifies the interrupt pending bit to clear.
+ * This parameter can be any combination of the following values:
+ * @arg @ref RCC_CRS_IT_SYNCOK
+ * @arg @ref RCC_CRS_IT_SYNCWARN
+ * @arg @ref RCC_CRS_IT_ERR
+ * @arg @ref RCC_CRS_IT_ESYNC
+ * @arg @ref RCC_CRS_IT_TRIMOVF
+ * @arg @ref RCC_CRS_IT_SYNCERR
+ * @arg @ref RCC_CRS_IT_SYNCMISS
+ */
+#define __HAL_RCC_CRS_CLEAR_IT(__INTERRUPT__) do { \
+ if(((__INTERRUPT__) & RCC_CRS_IT_ERROR_MASK) != 0U) \
+ { \
+ WRITE_REG(CRS->ICR, CRS_ICR_ERRC | ((__INTERRUPT__) & ~RCC_CRS_IT_ERROR_MASK)); \
+ } \
+ else \
+ { \
+ WRITE_REG(CRS->ICR, (__INTERRUPT__)); \
+ } \
+ } while(0)
+
+/**
+ * @brief Checks whether the specified CRS flag is set or not.
+ * @param __FLAG__ specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_CRS_FLAG_SYNCOK
+ * @arg @ref RCC_CRS_FLAG_SYNCWARN
+ * @arg @ref RCC_CRS_FLAG_ERR
+ * @arg @ref RCC_CRS_FLAG_ESYNC
+ * @arg @ref RCC_CRS_FLAG_TRIMOVF
+ * @arg @ref RCC_CRS_FLAG_SYNCERR
+ * @arg @ref RCC_CRS_FLAG_SYNCMISS
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define __HAL_RCC_CRS_GET_FLAG(__FLAG__) ((CRS->ISR & (__FLAG__)) == (__FLAG__))
+
+/**
+ * @brief Clears the CRS specified FLAG.
+ * @param __FLAG__ specifies the flag to clear.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_CRS_FLAG_SYNCOK
+ * @arg @ref RCC_CRS_FLAG_SYNCWARN
+ * @arg @ref RCC_CRS_FLAG_ERR
+ * @arg @ref RCC_CRS_FLAG_ESYNC
+ * @arg @ref RCC_CRS_FLAG_TRIMOVF
+ * @arg @ref RCC_CRS_FLAG_SYNCERR
+ * @arg @ref RCC_CRS_FLAG_SYNCMISS
+ * @retval None
+ */
+#define __HAL_RCC_CRS_CLEAR_FLAG(__FLAG__) do { \
+ if(((__FLAG__) & RCC_CRS_FLAG_ERROR_MASK) != 0U) \
+ { \
+ WRITE_REG(CRS->ICR, CRS_ICR_ERRC | ((__FLAG__) & ~RCC_CRS_FLAG_ERROR_MASK)); \
+ } \
+ else \
+ { \
+ WRITE_REG(CRS->ICR, (__FLAG__)); \
+ } \
+ } while(0)
+
+/**
+ * @brief Enables the oscillator clock for frequency error counter.
+ * @note when the CEN bit is set the CRS_CFGR register becomes write-protected.
+ * @retval None
+ */
+#define __HAL_RCC_CRS_FREQ_ERROR_COUNTER_ENABLE() SET_BIT(CRS->CR, CRS_CR_CEN)
+
+/**
+ * @brief Disables the oscillator clock for frequency error counter.
+ * @retval None
+ */
+#define __HAL_RCC_CRS_FREQ_ERROR_COUNTER_DISABLE() CLEAR_BIT(CRS->CR, CRS_CR_CEN)
+
+/**
+ * @brief Enables the automatic hardware adjustment of TRIM bits.
+ * @note When the AUTOTRIMEN bit is set the CRS_CFGR register becomes write-protected.
+ * @retval None
+ */
+#define __HAL_RCC_CRS_AUTOMATIC_CALIB_ENABLE() SET_BIT(CRS->CR, CRS_CR_AUTOTRIMEN)
+
+/**
+ * @brief Enables or disables the automatic hardware adjustment of TRIM bits.
+ * @retval None
+ */
+#define __HAL_RCC_CRS_AUTOMATIC_CALIB_DISABLE() CLEAR_BIT(CRS->CR, CRS_CR_AUTOTRIMEN)
+
+/**
+ * @brief Macro to calculate reload value to be set in CRS register according to target and sync frequencies
+ * @note The RELOAD value should be selected according to the ratio between the target frequency and the frequency
+ * of the synchronization source after prescaling. It is then decreased by one in order to
+ * reach the expected synchronization on the zero value. The formula is the following:
+ * RELOAD = (fTARGET / fSYNC) -1
+ * @param __FTARGET__ Target frequency (value in Hz)
+ * @param __FSYNC__ Synchronization signal frequency (value in Hz)
+ * @retval None
+ */
+#define __HAL_RCC_CRS_RELOADVALUE_CALCULATE(__FTARGET__, __FSYNC__) (((__FTARGET__) / (__FSYNC__)) - 1)
+
+#endif /* CRS */
+
+
+#if defined(RCC_CR_HSIOUTEN)
+/** @brief Enable he HSI OUT .
+ * @note After reset, the HSI output is not available
+ */
+
+#define __HAL_RCC_HSI_OUT_ENABLE() SET_BIT(RCC->CR, RCC_CR_HSIOUTEN)
+
+/** @brief Disable the HSI OUT .
+ * @note After reset, the HSI output is not available
+ */
+
+#define __HAL_RCC_HSI_OUT_DISABLE() CLEAR_BIT(RCC->CR, RCC_CR_HSIOUTEN)
+
+#endif /* RCC_CR_HSIOUTEN */
+
+#if defined(STM32L053xx) || defined(STM32L063xx) || defined(STM32L073xx) || defined(STM32L083xx)\
+ || defined(STM32L052xx) || defined(STM32L062xx) || defined(STM32L072xx) || defined(STM32L082xx)
+
+/**
+ * @brief Enable the Internal High Speed oscillator for USB (HSI48).
+ * @note After enabling the HSI48, the application software should wait on
+ * HSI48RDY flag to be set indicating that HSI48 clock is stable and can
+ * be used to clock the USB.
+ * @note The HSI48 is stopped by hardware when entering STOP and STANDBY modes.
+ */
+#define __HAL_RCC_HSI48_ENABLE() do { SET_BIT(RCC->CRRCR, RCC_CRRCR_HSI48ON); \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SYSCFGEN); \
+ SET_BIT(SYSCFG->CFGR3, SYSCFG_CFGR3_ENREF_HSI48); \
+ } while (0)
+/**
+ * @brief Disable the Internal High Speed oscillator for USB (HSI48).
+ */
+#define __HAL_RCC_HSI48_DISABLE() do { CLEAR_BIT(RCC->CRRCR, RCC_CRRCR_HSI48ON); \
+ CLEAR_BIT(SYSCFG->CFGR3, SYSCFG_CFGR3_ENREF_HSI48); \
+ } while (0)
+
+/** @brief Macro to get the Internal 48Mhz High Speed oscillator (HSI48) state.
+ * @retval The clock source can be one of the following values:
+ * @arg @ref RCC_HSI48_ON HSI48 enabled
+ * @arg @ref RCC_HSI48_OFF HSI48 disabled
+ */
+#define __HAL_RCC_GET_HSI48_STATE() \
+ (((uint32_t)(READ_BIT(RCC->CRRCR, RCC_CRRCR_HSI48ON)) != 0U) ? RCC_HSI48_ON : RCC_HSI48_OFF)
+
+/** @brief Enable or disable the HSI48M DIV6 OUT .
+ * @note After reset, the HSI48Mhz (divided by 6) output is not available
+ */
+
+#define __HAL_RCC_HSI48M_DIV6_OUT_ENABLE() SET_BIT(RCC->CR, RCC_CRRCR_HSI48DIV6OUTEN)
+#define __HAL_RCC_HSI48M_DIV6_OUT_DISABLE() CLEAR_BIT(RCC->CR, RCC_CRRCR_HSI48DIV6OUTEN)
+
+#endif /* STM32L071xx || STM32L081xx || */
+ /* STM32L072xx || STM32L082xx || */
+ /* STM32L073xx || STM32L083xx */
+
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup RCCEx_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup RCCEx_Exported_Functions_Group1
+ * @{
+ */
+
+HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit);
+void HAL_RCCEx_GetPeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit);
+uint32_t HAL_RCCEx_GetPeriphCLKFreq(uint32_t PeriphClk);
+
+
+void HAL_RCCEx_EnableLSECSS(void);
+void HAL_RCCEx_DisableLSECSS(void);
+void HAL_RCCEx_EnableLSECSS_IT(void);
+void HAL_RCCEx_LSECSS_IRQHandler(void);
+void HAL_RCCEx_LSECSS_Callback(void);
+
+
+#if defined(SYSCFG_CFGR3_ENREF_HSI48)
+void HAL_RCCEx_EnableHSI48_VREFINT(void);
+void HAL_RCCEx_DisableHSI48_VREFINT(void);
+#endif /* SYSCFG_CFGR3_ENREF_HSI48 */
+
+/**
+ * @}
+ */
+
+#if defined(CRS)
+
+/** @addtogroup RCCEx_Exported_Functions_Group3
+ * @{
+ */
+
+void HAL_RCCEx_CRSConfig(RCC_CRSInitTypeDef *pInit);
+void HAL_RCCEx_CRSSoftwareSynchronizationGenerate(void);
+void HAL_RCCEx_CRSGetSynchronizationInfo(RCC_CRSSynchroInfoTypeDef *pSynchroInfo);
+uint32_t HAL_RCCEx_CRSWaitSynchronization(uint32_t Timeout);
+void HAL_RCCEx_CRS_IRQHandler(void);
+void HAL_RCCEx_CRS_SyncOkCallback(void);
+void HAL_RCCEx_CRS_SyncWarnCallback(void);
+void HAL_RCCEx_CRS_ExpectedSyncCallback(void);
+void HAL_RCCEx_CRS_ErrorCallback(uint32_t Error);
+
+/**
+ * @}
+ */
+
+#endif /* CRS */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32L0xx_HAL_RCC_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
|